Engine (9)

Upper and Lower Motor Mount Hardware — Upper/Lower, cadmium plated

-€6.62
Out of Stock

COLONY Upper and Lower Motor Mount Hardware — Upper/Lower, cadmium...

Hardware kit with bolts, nylock nuts and washers for upper and lower motor mounts. Made in the U.S.A.

€25.70 €32.32

-€9.48
Out of Stock

COLONY Motor Mount Hardware — Engine mount, chrome, kit

Comprehensive motor mount hardware kit including bolts, nylock nuts and assorted washers. Made in the U.S.A.

€36.83 €46.31

-€9.20
Out of Stock

COLONY Motor Sprocket Shaft Bearing Retainers — Oversized threads

High-quality lip-seal retainer that prevents oil seepage around the motor sprocket shaft; easy to install, made in the U.S.A.

€35.76 €44.96

-€9.20
Out of Stock

COLONY Motor Sprocket Shaft Bearing Retainers — Undersized threads

Easy solution for oil seeping around the motor sprocket shaft.

High-quality lip seal for reliable sealing.

Made in the U.S.A.

€35.76 €44.96

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€7.67
Out of Stock

COLONY Upper Fork Tube Caps/Bolts — Upper mounting, Chrome

Precision caps and bolts for a clean finish and secure clamping. Made in the U.S.A.

€21.68 €29.35

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

-€1.21
Out of Stock

COLONY Fork Tube Bolt Washers — 25 mm (1.00"), Chrome, Pair

Precision washers with a 41 mm outside diameter. Made in the U.S.A., they help secure suspension fasteners and resist loosening under vibration.

€3.42 €4.63

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Fork Tube Spring Retainer and Pin Wrench Kit — Fork tube, retainer & wrench

-€9.44
Out of Stock

COLONY Fork Tube Spring Retainer and Pin Wrench Kit — Fork tube,...

Pin wrench plus two spring retainers for fork tube maintenance. Retainers sold separately. Made in the U.S.A.

€36.73 €46.17

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€10.08
Out of Stock

COLONY Stem Bolt and Cover Kit — steering, chrome, hex head

Complete kit with sleeve, stem bolt, dust shield, spacer, rubber plug and cover. Made in the U.S.A.

€39.20 €49.28

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

Linkert/Bendix Carburetor Throttle Lever Wire Block Kit — Cadmium plated

-€3.64
Out of Stock

COLONY Linkert/Bendix Carburetor Throttle Lever Wire Block Kit —...

Complete throttle lever wire block kit with block, screw, cotter pin and brass washers. Made in the USA.

€10.27 €13.91

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

-€3.64
Out of Stock

COLONY Linkert/Bendix Carburetor Throttle Lever Wire Block Kit —...

Includes plated block, screw, cotter pin and brass washers. Made in the USA.

€10.27 €13.91

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€2.99
Out of Stock

COLONY Front Fender Mounting Hardware Kit — Front, Parkerized

Includes four locktabs and four bolts. Made in the U.S.A.

€8.43 €11.42

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78
Out of Stock

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium plated

-€6.12
Out of Stock

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium...

Complete rear fender mounting hardware kit with bolts, screws, nuts, and lockwashers; made in the U.S.A.

€23.78 €29.90

-€5.50
Out of Stock

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, Cadmium...

Complete hardware kit for rear fender installation; includes bolts, screws, nuts and lockwashers. Made in the U.S.A.

€21.38 €26.88

-€3.51
Out of Stock

COLONY FX Dash Mounting Hardware Kit — Chrome

Chrome plated dash mounting button Allen kit. Made in the USA.

€9.91 €13.42

-€2.17
Out of Stock

COLONY FX Dash Mounting Hardware Kit — Chrome, Silver

Chrome-plated button-head Allen kit for dash mounting; made in the USA.

€6.14 €8.31

Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — 3/8"-16, 5/16"-24 bolts, parkerized black

-€5.50
Out of Stock

COLONY Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — 3/8"-16,...

Kit includes three 3/8"-16 bolts, four 5/16" bolts, one nut, four 5/16"-24 nuts and four lock washers. Made in the U.S.A.

€21.38 €26.88

Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

-€4.59
Out of Stock

COLONY Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

Hinge bolt kit for floorboards — includes four shoulder bolts, four 1/4" flat washers, and four 1/4"-20 nylock nuts.

€12.99 €17.58

-€7.96
Out of Stock

COLONY Brake Stud Kit — Front, Cadmium plated

Includes one stud, stud washer, 7/16" washer, 7/16" -20 nut and 7/16" lockwasher; for front brake shoe service; Made in the U.S.A.

€22.49 €30.45

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64
Out of Stock

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€1.83
Out of Stock

COLONY Rear Brake Rod and Cable Adjusting Nut — Hex nut, chrome

Precision fastener for fine adjustment and secure linkage connections. Made in the U.S.A.

€5.16 €6.99

Rear Brake Rod and Cable Adjusting Nut — Rear brake, hex nut, cadmium plated

-€1.79
Out of Stock

COLONY Rear Brake Rod and Cable Adjusting Nut — Rear brake, hex nut,...

Adjusting nut for rear brake rod and cable. Quick installation and reliable performance. Made in the U.S.A.

€5.03 €6.82

Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium Plated

-€7.73
Out of Stock

COLONY Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium...

Complete kit includes pivot stud, locating block, nut, and lockwasher for rear brake anchor and pivot assemblies.

€30.10 €37.83

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine