Engine (9)

-€9.40
Out of Stock

GARDNER-WESTCOTT Primary Cover Bolt Kit — Primary cover only, Silver

Complete bolt kit for the primary cover; includes all hardware for quick installation.

€36.51 €45.91

-€8.03
Out of Stock

GARDNER-WESTCOTT Primary Cover Bolt Kit — Silver (polished, natural)

Complete bolt kit for primary cover. Primary cover only. Made in the U.S.A.

€31.22 €39.25

-€13.08
Out of Stock

GARDNER-WESTCOTT Primary Clutch/Chain Cover Bolt Kit — Silver

Complete bolt kit for primary, clutch, and chain covers; includes necessary fasteners for straightforward installation.

€50.84 €63.92

-€13.10
Out of Stock

GARDNER-WESTCOTT Rocker Box Mounting Kit — GARDNER-WESTCOTT, C-80-115Y

Includes all hex-head bolts, Allen-head bolts and washers needed to install a pair of rocker boxes on a motor. Made in the U.S.A.

€50.92 €64.02

-€8.22
Out of Stock

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head, Front, Chrome

Replacement caliper mounting bolts and washers; made in the USA.

€32.00 €40.22

Carburetor Socket-Head Bolt Kit — For CV carburetors, Chrome

-€3.09
Out of Stock

GARDNER-WESTCOTT Carburetor Socket-Head Bolt Kit — For CV carburetors, Chrome

Replaces stock screws with strong socket-head bolts; made in the U.S.A.

€12.01 €15.10

-€40.73
Out of Stock

JIMS Hydrosolid Tappets — 0.8420 in, Part No. 1820

Performs as a hydraulic tappet up to 5,500 rpm, then converts to solid for an estimated 3–6 usable hp; prevents hydraulic pump and requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

-€16.14
Out of Stock

GARDNER-WESTCOTT Head Bolt Set — C-74-10, chrome

Secures the cylinder head to the engine block. Made in the USA.

€62.80 €78.94

$Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\" diameter$

-€47.80
Out of Stock

JIMS Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\"...

High-capacity hydraulic tappets developed for increased load, lubrication and service life; billet body and wider rollers.

€185.91 €233.71

-€46.22
Out of Stock

JIMS Powerglide™ Steady Roll Tappets — Standard, Hydraulic, JIMS 1827

Hydraulic tappets with a Steady Roll bronze bushing replacing the needle roller; increased load, lubrication and life capacities; billet steel body and hand-honed hydraulic cavity.

€179.76 €225.98

-€131.44
Out of Stock

JIMS Solid Adjustable Tappet Kit — JIMS 5525

4340 chromoly pushrods with solid adjustable tappets for aggressive cam profiles and high RPM; made in the U.S.A.

€511.17 €642.61

-€5.68
Out of Stock

GARDNER-WESTCOTT Transmission Oil Fill Plug — Oil pump plug, Silver

Side-removable with a socket-head wrench. Easy-to-use fill cap. Made in the United States.

€22.14 €27.82

-€3.26
Out of Stock

GARDNER-WESTCOTT Generator Mount Bolt Set — Chrome

Replacement hardware for secure mounting of electrical accessories. Durable and easy to install.

€12.67 €15.93

-€19.89
Out of Stock

GARDNER-WESTCOTT Head Bolt Set — 12-point flange, chrome

Secures the cylinder head to the engine block. Made in the USA.

€77.38 €97.27

-€0.93
Out of Stock

GARDNER-WESTCOTT Chrome Hex Drain Plug — 1/8" NPT (Male)

Hex drain plug sold individually. Made in the U.S.A.

€3.65 €4.58

Hose and Tank Fitting — 1/8" NPT male, 3/8" hose fitting, oil tank, Chrome

-€3.18
Out of Stock

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8" NPT male, 3/8" hose fitting, oil...

Secure replacement fitting for connecting hoses to fluid tanks; precision machined for reliable sealing and long service life.

€12.40 €15.58

Flow Pro 1 Billet Oil Pump Complete Assembly — Black, 6061 billet aluminum

-€193.92
Out of Stock

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Black, 6061...

Complete oil pump kit with CNC-machined feed and return gears. Includes all internal components; check motor case thread size before installation. '73–'80 may require drilling (PART #DS-179009 sold separately).

€754.16 €948.08

-€26.76
Out of Stock

ANDREWS Pushrod Kit — Set of 4, Fixed length

Super-light, heavy-duty fixed-length pushrods; sold as a set of four to replace OE—two intake, two exhaust. Rocker boxes must be removed for installation.

€104.06 €130.82

-€47.82
Out of Stock

ANDREWS Adjustable Pushrods — 4 Pack

Replaces nonadjustable stock rods on H-D engines for precise valvetrain control.

€185.98 €233.80

-€9.21
Out of Stock

JIMS Rocker Arm Shaft — JIMS, 17611-83

Precision-machined replacement to restore valve-train alignment. Made in the U.S.A.

€35.82 €45.03

-€28.51
Out of Stock

JIMS Crank Pin — 23960-54, Silver

Quality replacement that meets or exceeds OEM specifications. Made in the U.S.A.

€110.85 €139.36

-€24.78
Out of Stock

JIMS Rod Race Set — Copper

Precision rod race set machined from 52100 Timken® bearing stock. Made in the U.S.A.

€96.39 €121.17

-€167.20
Out of Stock

JIMS Aluminum Lifter Blocks — Pair, Aluminum finish

Kits include front and rear lifter blocks plus gaskets. Mounting screws sold separately; 53-65 models use 1/4"-24 screws. Made in the U.S.A.

€650.23 €817.43

-€37.12
Out of Stock

JIMS Motor Sprocket Shaft — JIMS, 24001-56

Precision motor sprocket shaft designed for reliable power transfer and long service life. Made in the U.S.A.

€144.38 €181.50

-€37.40
Out of Stock

JIMS Right-Side Crankcase Bushing — Standard Size, 24599-40

Precision right-side crankcase bushing with 360° oiling and U.S.-made construction.

€145.42 €182.82

-€39.47
Out of Stock

JIMS Pinion Gear Shaft — JIMS, 24006-54A

Precision pinion gear shaft, made in the U.S.A., designed for reliable drivetrain performance.

€153.55 €193.02

-€45.01
Out of Stock

JIMS Pinion Gear Shaft — JIMS, 24007-39

Precision replacement shaft made in the U.S.A.; heat-treated and precision ground for long life. Inspect bearings and seals during installation.

€175.03 €220.04

-€40.26
Out of Stock

JIMS Motor Sprocket Shaft — 23909-80, Steel

All ground diameters concentric to within .0003" for easier flywheel trueing and rebuilding. Manufactured from domestic materials. Made in the USA.

€156.57 €196.83

-€34.42
Out of Stock

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84
Out of Stock

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company