Engine (9)

-€5.82

COLONY Motor Mount Bolt Kit — Upper, Engine Mount, Parkerized

Complete motor mount hardware kit with bolt, locknut, washers, castle nuts, and cotter key. Made in the U.S.A.

€16.47 €22.29

Upper and Lower Motor Mount Hardware — Upper/Lower, cadmium plated

-€6.62

COLONY Upper and Lower Motor Mount Hardware — Upper/Lower, cadmium...

Hardware kit with bolts, nylock nuts and washers for upper and lower motor mounts. Made in the U.S.A.

€25.70 €32.32

-€9.48

COLONY Motor Mount Hardware — Engine mount, Silver

Complete motor mount hardware kit with bolts, nylock nuts, and washers; made in the U.S.A.

€36.83 €46.31

-€9.20

COLONY Motor Sprocket Shaft Bearing Retainers — Oversized threads

Easy solution to oil seeping around the motor sprocket shaft.

High-quality lip seal provides reliable leak protection.

Made in the USA.

€35.76 €44.96

-€9.20

COLONY Motor Sprocket Shaft Bearing Retainers — PN 7410-1-US

High-quality lip-seal retainer that prevents oil seepage around the sprocket shaft; made in the USA.

€35.76 €44.96

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€7.67

COLONY Upper Fork Tube Caps/Bolts — Upper mounting, Chrome

Precision caps and bolts for a clean finish and secure clamping. Made in the U.S.A.

€21.68 €29.35

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Fork Tube Bolt Washers — 25.00 mm (1.00") fork tube diameter, Chrome finish

-€1.21

COLONY Fork Tube Bolt Washers — 25.00 mm (1.00") fork tube diameter,...

41 mm outside diameter. Made in the U.S.A.

€3.42 €4.63

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Fork Tube Spring Retainer and Pin Wrench Kit — Fork tube, retainer & wrench

-€9.44

COLONY Fork Tube Spring Retainer and Pin Wrench Kit — Fork tube,...

Pin wrench plus two spring retainers for fork tube maintenance. Retainers sold separately. Made in the U.S.A.

€36.73 €46.17

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€10.08

COLONY Stem Bolt and Cover Kit — steering, chrome, hex head

Complete kit with sleeve, stem bolt, dust shield, spacer, rubber plug and cover. Made in the U.S.A.

€39.20 €49.28

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

Linkert/Bendix Carburetor Throttle Lever Wire Block Kit — Cadmium plated

-€3.64

COLONY Linkert/Bendix Carburetor Throttle Lever Wire Block Kit —...

Complete throttle lever wire block kit with block, screw, cotter pin and brass washers. Made in the USA.

€10.27 €13.91

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

-€3.64

COLONY Linkert/Bendix Carburetor Throttle Lever Wire Block Kit —...

Includes plated block, screw, cotter pin and brass washers. Made in the USA.

€10.27 €13.91

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€2.99

COLONY Front Fender Mounting Hardware Kit — Front, Parkerized

Includes four locktabs and four bolts. Made in the U.S.A.

€8.43 €11.42

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium plated

-€6.12

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium...

Complete rear fender mounting hardware kit with bolts, screws, nuts, and lockwashers; made in the U.S.A.

€23.78 €29.90

-€5.50

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, Cadmium...

Complete hardware kit for rear fender installation; includes bolts, screws, nuts and lockwashers. Made in the U.S.A.

€21.38 €26.88

-€3.51

COLONY FX Dash Mounting Hardware Kit — Chrome finish

Complete chrome-plated dash mounting Allen button kit for secure, low-profile attachment.

€9.91 €13.42

-€2.17

COLONY FX Dash Mounting Hardware Kit — Chrome, Button-head

Complete Allen-style dash mounting kit for FX models. Made in the USA.

€6.14 €8.31

Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — Foot Lever, Black

-€5.50

COLONY Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — Foot...

Includes three 3/8"-16 bolts, four 5/16" bolts, one nut, four 5/16"-24 nuts, and four lock washers. Made in the U.S.A.

€21.38 €26.88

Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

-€4.59

COLONY Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

Hinge bolt kit for floorboards — includes four shoulder bolts, four 1/4" flat washers, and four 1/4"-20 nylock nuts.

€12.99 €17.58

Brake Stud Kit — Front, Shoulder (Pivot) fastener, Cadmium plated, Steel

-€7.96

COLONY Brake Stud Kit — Front, Shoulder (Pivot) fastener, Cadmium...

Includes components to service the front brake shoe: stud, washers, nut, and lockwasher.

€22.49 €30.45

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€1.83

COLONY Rear Brake Rod and Cable Adjusting Nut — Hex nut, chrome

Precision fastener for fine adjustment and secure linkage connections. Made in the U.S.A.

€5.16 €6.99

Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium Plated

-€7.73

COLONY Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium...

Complete kit includes pivot stud, locating block, nut, and lockwasher for rear brake anchor and pivot assemblies.

€30.10 €37.83

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine