Engine (9)

Cam Chest Kit without Cams for Chain Drive Twin Cam — black pushrod tubes

-€326.57

S&S CYCLE Cam Chest Kit without Cams for Chain Drive Twin Cam — black...

Precision billet-aluminum oil pump and cam plate assembly with removable passage plugs, independent scavenge sections, debris screens, magnet trap, Quikee pushrods and S&S precision tappets.

€1,272.45 €1,599.02

Cam Chest Kit without Cams for Chain Drive Twin Cam — Chain drive, chrome pushrod tubes

-€312.99

S&S CYCLE Cam Chest Kit without Cams for Chain Drive Twin Cam — Chain...

Cam chest kit for chain drive Twin Cam engines. Supplied without cams; includes precision oil pump/cam plate, pushrods and tappets. Improves oil flow and reduces valve train noise.

€1,217.47 €1,530.46

-€14.58

FEULING OIL PUMP CORP. Cam Chain Tensioner — Stock Replacement, PN 8073

Precision billet aluminum housing with injection-molded nylon pad enhanced with PTFE. Single-piston design matching stock pressure, includes ARP® 12-point hardware. Made in USA.

€56.82 €71.40

-€159.84

FEULING OIL PUMP CORP. Race Series® Chain Drive Camshaft Kit — Chain Drive, P/N 1459

Complete Race Series® camshaft kit with Reaper® cam, full-travel hydraulic lifters (0.200" travel), gasket/o-ring kit, ARP cam/crank fasteners and installation kit. Made in the USA. Not for '23-'24 models with 121" VVT motors.

€621.59 €781.43

-€3.59

S&S CYCLE Camshaft Outer Ball Bearing — S&S CYCLE, 31-4081

OE-quality replacement camshaft outer ball bearing. Sold each. Made in the U.S.A.

€13.98 €17.57

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€204.38

S&S CYCLE 510G Camshaft Kit — 510 Series, 252° exhaust, 238° intake

Bolt-in 510G cam kit for 88", 95", 96" and 103" engines. Includes camshafts, outer cam drive gear kit and installation hardware. Stock pushrods and valve springs acceptable.

€796.36 €1,000.74

-€3.83

S&S CYCLE Idler Gearshaft — S&S Cycle, 31-2039

Idler gearshaft for generator crankcase gear kits; precision machined and made in the USA.

€14.91 €18.74

-€363.35

S&S CYCLE Generator Engine Case Gear Kit — 33-4226, Engine Case, Raw

Includes circuit breaker drive gear, idler gear assembly and circuit breaker shaft gear with shims. Shaft parts sold separately. Made in the U.S.A.

€456.52 €819.87

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€4.69

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005 in, 10-pack

Precision cam shims for accurate cam setup; made in the USA.

€5.02 €9.71

$Cam Shims — 0.015\", 10 pack, 1st/3rd/4th gear$

-€2.54

EASTERN MOTORCYCLE PARTS Cam Shims — 0.015\", 10 pack, 1st/3rd/4th gear

Precision shims for cam setup. A must when setting up new cams. Made in the USA.

€7.17 €9.71

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8 Pack, breather valve

-€8.37

EASTERN MOTORCYCLE PARTS Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8...

Set of washers for breather valves. Use only with plastic breather valves; do not mix plastic and steel parts. Made in the U.S.A.

€23.66 €32.03

-€9.21

EASTERN MOTORCYCLE PARTS Cam Shims — 0.050"–0.095", 10-pack

Precision shims for accurate valve adjustment. Made in the U.S.A.

€26.01 €35.22

Cam Support Plate/Cover Bushing — A-25586-37, Eastern Motorcycle Parts

-€9.21

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — A-25586-37, Eastern...

Precision support bushing for cam cover assemblies. Press-fit installation; check service manual for fitment and torque.

€26.01 €35.22

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€15.56

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Part No. 15-0127

Complete cam bushing kit with bushings, bearings, lock pins, and thrust plate; standard sizes for easy replacement.

€60.45 €76.01

-€12.72

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Cam kit, 15-0129

Includes cam and gear shaft bushings/bearings, lock pins, and a thrust plate. All parts are standard sizes. Made in the U.S.A.

€49.42 €62.14

-€23.28

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — 15-0131

Complete cam and gear shaft bushing kit for Big Twin engines; includes lock pins and thrust plate. Made in the U.S.A.

€65.81 €89.09

-€9.10

EASTERN MOTORCYCLE PARTS Cam Bushing — Support plate, A-25581-70

High-quality OEM cam bushing. Made in the U.S.A.

€25.70 €34.80

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

-€22.44

S&S CYCLE Pinion Gear — 1.4729–1.4737 in

Precision-machined, heat-treated pinion gear, finish ground for reliable engagement. Made in the USA.

€87.26 €109.70

-€22.44

S&S CYCLE Pinion Gear — 1.4721"–1.4729"

Precision-machined, heat-treated pinion gear. Made in USA.

€87.26 €109.70

-€3.81

EASTERN MOTORCYCLE PARTS Thrust Washers — 3rd Gear

Precision components that reduce friction and provide reliable axial support. Made in the U.S.A.

€14.78 €18.59

-€1.92

EASTERN MOTORCYCLE PARTS Bearing Retaining Ring — A-35113-52, 10 Pack

Durable bearing retaining ring for secure fit and reliable performance in repair and maintenance tasks.

€7.50 €9.42

-€28.56

S&S CYCLE Pinion Gear — 1.4475" - 1.4480"

Precision finish-ground pinion gear engineered for reliable drivetrain performance. Made in the United States.

€111.07 €139.63

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company