Engine (85)

-€34.42
Out of Stock

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84
Out of Stock

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

Super Stock® Alternator Style Engine Case — 3.5" bore, standard, natural finish

-€392.39
Out of Stock

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.5" bore,...

Alternator-style engine case with 3.5" stock bore, complete hardware kit, machined for EFI fitment. Made in USA.

€1,529.00 €1,921.39

-€391.81
Out of Stock

S&S CYCLE Super Stock® Big Bore Engine Case — 3.625" bore, Raw

Precision-machined big-bore crankcase kit, machined for EFI; includes hardware, bearings, seals and installation instructions.

€1,523.68 €1,915.49

-€3.09
Out of Stock

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€8.55
Out of Stock

JAMES GASKET Oil Pump Shaft Key — 10-pack

Precision replacement shaft key for oil pump. Made in the U.S.A.

€29.02 €37.57

-€34.42
Out of Stock

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

$Steel Breather Gear Kit — Oversized +0.03\", requires matching cam and pinion$

-€38.85
Out of Stock

S&S CYCLE Steel Breather Gear Kit — Oversized +0.03\", requires matching...

Includes gear and spacer; requires corresponding cam and pinion; made in the U.S.A.

€151.07 €189.92

-€79.38
Out of Stock

JIMS Chrome Billet Lifter Covers — Pair

Precision CNC-machined lifter covers. Gaskets and screws included. Made in the United States.

€308.69 €388.07

-€140.80
Out of Stock

S&S CYCLE Heavy-Duty Connecting Rod Sets — Steel

Complete heavy-duty rod set with front and rear rods, crankpin, reinforced cages and roller bearings. Deep-forged and heat-treated; 0.120" wider than stock and fits strokes up to 5.00". Made in the USA.

€547.52 €688.32

Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S CYCLE 34-7011

-€140.80
Out of Stock

S&S CYCLE Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S...

Complete kit with front and rear rods, crankpin and nuts, durable cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; rod-to-rod clearance for strokes up to 5.00". Installation may require additional clearancing.

€547.52 €688.32

Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

-€79.01
Out of Stock

DRAG SPECIALTIES Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

Heavy-duty, OEM-spec connecting rod assembly supplied as a complete, ready-to-install set.

€223.28 €302.29

Countershaft Gear End Washer Set — 7-pack

-€10.47
Out of Stock

EASTERN MOTORCYCLE PARTS Countershaft Gear End Washer Set — 7-pack

Precision steel washers for gear-end transmission applications; matched group for service and maintenance. Made in the U.S.A.

€29.56 €40.03

1st and 2nd Gear Countershaft Washers — 5 Pack

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS 1st and 2nd Gear Countershaft Washers — 5 Pack

Replacement washers for the 1st and 2nd gear countershaft; maintain correct axial spacing and shifting performance.

€17.70 €23.96

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Retaining Washers — Standard size

Precision metal rings for securing fasteners; manufactured in the U.S.A., suitable for automotive and general use.

€23.64 €32.00

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Washers — Standard, 2nd Gear, 3rd Gear, 5 Pack

Precision washers for consistent spacing and load distribution. Made in the U.S.A.

€17.70 €23.96

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Washers — +0.015", 2nd/3rd gear, 5 pack

Precision mainshaft washers that promote reliable gear alignment and smooth shifting; durable and corrosion-resistant.

€17.70 €23.96

1st Gear Countershaft Thrust Washers — 5-Pack

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS 1st Gear Countershaft Thrust Washers — 5-Pack

Thrust washer for 4-Speed Big Twin engines; controls axial play and supports transmission longevity.

€17.70 €23.96

Countershaft Inner Retaining Washers — 5-pack

-€5.74
Out of Stock

EASTERN MOTORCYCLE PARTS Countershaft Inner Retaining Washers — 5-pack

Precision countershaft inner retaining washers for secure fit and reliable performance. Made in the U.S.A.

€16.22 €21.96

$Mainshaft Retaining Washers — 1.65 mm (0.065\"), 4-Speed, 5 Pack$

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Retaining Washers — 1.65 mm (0.065\"), 4-Speed, 5 Pack

Replacement retaining washers for 4-speed Big Twins. Packaged for easy maintenance and repairs.

€23.64 €32.00

Mainshaft Retaining Washers — 1.78 mm thickness, 4-speed, 5 pack

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Retaining Washers — 1.78 mm thickness, 4-speed, 5 pack

Replacement retaining washers for Big Twins.

€23.64 €32.00

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11
Out of Stock

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22
Out of Stock

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60
Out of Stock

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€3.89
Out of Stock

JAMES GASKET 5th Gear O-Ring & Seal — Main drive gear, oil seal

O-ring and seal for reliable leak prevention. Durable molded construction. Made in the U.S.A.

€13.22 €17.11

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€6.48
Out of Stock

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

-€7.55
Out of Stock

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine