Engine (8)

Race Series® Oil Pump — Red anodized, 7075 billet aluminum

-€114.49

FEULING OIL PUMP CORP. Race Series® Oil Pump — Red anodized, 7075 billet aluminum

High-flow oil pump for M-Eight engines that increases oil and scavenge volume, improves pressure control, lowers oil and engine temperatures, and requires the High Flow cam plate (part #0932-0192). Made in the USA.

€445.24 €559.73

-€278.38

FEULING OIL PUMP CORP. Race Series® Oil System Packs For M8 — Red

Precision-machined oil system packs for M8 engines that increase oil flow, scavenge volume and pressure while reducing temperatures and wet sumping. Includes pump, lifters, high-flow camplate and installation kit.

€1,082.58 €1,360.96

Pressure Relief Valve, Springs and Plunger — Oil pump, P/N 8026

-€2.95

FEULING OIL PUMP CORP. Pressure Relief Valve, Springs and Plunger — Oil pump, P/N 8026

Replacement spring and plunger assembly for oil pump pressure relief valve — increases pop‑off psi and restores proper bypass control. Bench‑test with PART #3801-0071.

€9.32 €12.27

-€6.12

FEULING OIL PUMP CORP. Pressure Relief Valve, Springs and Plunger — Oil pump, 6-pack

Precision-machined plunger and spring set to restore and control pressure relief pop-off. Increases pop-off psi; bench test with PART #3801-0071. Made in the USA.

€23.81 €29.93

OE+ Oiling System/Cam Chest Freshen Up Kit — High Volume, '07-'17 Chain Drive

-€376.80

FEULING OIL PUMP CORP. OE+ Oiling System/Cam Chest Freshen Up Kit — High Volume,...

Freshen the cam chest and oiling passages on late-model Twin Cam engines. Complete set with pump, camplate, lifters, sprockets, chains, bearings, hardware and gaskets.

€1,064.85 €1,441.65

-€85.27

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — FEULING PARTS 3000

Complete kit with eight cylinder studs and eight head bolts, plus moly assembly lubricant and thread sealant; precision J-formed threads reduce galling and help prevent gasket failure.

€331.60 €416.87

Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

-€69.56

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

Complete kit with eight heat-treated 8740 chromoly studs, eight polished head bolts, moly lubricant, and thread sealant; precision J-formed threads prevent galling.

€270.56 €340.12

-€30.70

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel

Precision J-form cylinder stud kit with eight studs, moly assembly lubricant, and thread sealant. Stock replacement and reusable; manufactured by ARP® in the USA.

€119.36 €150.06

-€28.46

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel, Chrome finish

High‑strength cylinder stud kit with precision J‑form threads. Includes eight studs, moly assembly lubricant and thread sealant; reusable and made in the USA.

€110.67 €139.13

-€33.91

FEULING OIL PUMP CORP. Rocker Arm Shaft Stud & Nut Kit — Black

Stud and nut kit that reinforces rocker arm shaft standoffs to help prevent cylinder head cracking.

€131.90 €165.81

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

-€67.65
New

FEULING PARTS FEULING PARTS LIFTERS RS OVERSIZED OD 0.843-

LIFTERS RS OVERSIZED OD 0.843-

€263.59 €331.24

-€22.54
New

FEULING PARTS FEULING PARTS SHIMS ROCKER SHAFT .003 24PK M

SHIMS ROCKER SHAFT .003 24PK M

€87.81 €110.35

-€22.54
New

FEULING PARTS Rocker Shaft Shims — 24 pack

Reduces rocker arm end play to cut noise and restore proper rocker arm oil psi. Professional installation recommended. Made in the USA.

€87.81 €110.35

-€22.54
New

FEULING PARTS Rocker Shaft Shims — Rocker Shaft, 24-pack

Reduces rocker arm end play and engine noise. Recommended side clearance: 0.0035" - 0.005". Helps limit wear on M8 rocker standoffs. Professional installation required. Made in the USA.

€87.81 €110.35

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56
Out of Stock

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

High Flow Camplate — 7075 billet aluminum, Chain drive

-€92.08
Out of Stock

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, Chain drive

Precision-machined camplate that increases oil flow and volume, lowers engine and oil temperatures, and is pressure tested to 55-60 psi. Includes bearing and retainer hardware. For use with Feuling® oil pumps.

€358.14 €450.22

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72
Out of Stock

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine