Engine (8)

$Screw Mount Kit — 8-32 × 12.7 mm (1/2\"), fuel pump top plate, 10-pack, silver$

-€4.13

DRAG SPECIALTIES Screw Mount Kit — 8-32 × 12.7 mm (1/2\"), fuel pump top plate,...

OEM replacement mounting kit for secure, reliable fastening and quick installation.

€11.67 €15.80

-€2.94

KIBBLEWHITE OEM Style Cast Iron Valve Guide — Cast iron, 20-4100C

Precision-machined cast iron valve guide compatible with no-lead fuel; restores valve-to-guide clearance. Made in the U.S.A.

€6.07 €9.01

$Screw Mount Kit — 8-32 thread, 19 mm (3/4\"), Fuel Pump Top Plate, 12 Pack$

-€5.35

DRAG SPECIALTIES Screw Mount Kit — 8-32 thread, 19 mm (3/4\"), Fuel Pump Top...

OEM replacement mounting kit engineered for reliable, leak-resistant installation.

€15.13 €20.48

-€2.87

KIBBLEWHITE Red Valve Seals — 4-pack

Durable valve seals made from 100% solid rubber; meet or exceed OEM specs. Sold as a set of four.

€8.10 €10.97

Screw Mount Kit — Fuel pump top plate, 10-24 thread, 22.2 mm (7/8"), 5 pack, Silver Zinc

-€1.23

DRAG SPECIALTIES Screw Mount Kit — Fuel pump top plate, 10-24 thread, 22.2 mm...

OEM replacement mounting hardware for secure, reliable installation.

€3.45 €4.68

-€10.47

DRAG SPECIALTIES Rocker Box Bolt Cover — Silver

Durable engine accessory with precise fit and easy installation.

€29.58 €40.05

-€14.02

DRAG SPECIALTIES Head Bolt Covers — 4 pack, chrome

Polished head bolt covers with a mirror-like finish. Made in the USA.

€39.60 €53.62

Beehive Valve™ Spring Kit — spring lift 0.640", open pressure 285 lb, seat pressure 83 lb

-€191.63

KIBBLEWHITE Beehive Valve™ Spring Kit — spring lift 0.640", open pressure...

Progressively wound springs and FEA-designed retainers for reliable valve control and durability. Uses OEM-style valve keys (sold separately).

€541.08 €732.71

-€162.77

KIBBLEWHITE Beehive Valve™ Spring Kit — Spring lift 0.640", Open pressure...

Progressive beehive springs for improved valve control and reduced coil mass.

Includes Posi-Loc™ style retainers and heat-treated basewashers.

Made in the USA; OEM-style valve keys sold separately.

€459.65 €622.42

-€0.77

DRAG SPECIALTIES Rocker Shaft Seals — 4 Pack, 1966–1984 Shovelhead

Complete seal set with shims and spacers to rebuild all four rocker arm shafts on 1966–1984 Shovelhead engines. Replace with each valve job.

€2.18 €2.95

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black

Includes upper and lower tubes, clips, cups, springs and washers; O-rings/corks sold separately. One kit completes an engine.

€81.16 €109.88

-€6.33

DRAG SPECIALTIES Disc Brake Hub Mounting Kit — Rear, Chrome

Secure mounting kit with Grade 8 bolts and large-diameter button-head Torx® heads for increased load-bearing surface. Made in the U.S.A.

€17.89 €24.22

Handlebar Clamp Bolt Set — Handlebar clamp, Chrome, Silver

-€2.15

DRAG SPECIALTIES Handlebar Clamp Bolt Set — Handlebar clamp, Chrome, Silver

Made in the USA. Not for "pullback" designs. Includes precision components for secure mounting.

€6.07 €8.22

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€2.64

DRAG SPECIALTIES Timing and Oil Tank Drain Plug — socket head

Drains timing covers and some oil tanks; recessed hex head for secure fit; precision-made in the U.S.A.

€7.45 €10.09

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

-€3.12

KIBBLEWHITE Valve Seal — 4-pack

Seals for use with intake and exhaust valve guides; choker and lower-tension springs maintain sealing under heat and stress. Made in the United States.

€8.83 €11.95

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€76.40

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€215.92 €292.32

-€2.02

DRAG SPECIALTIES Points Cover — Chrome

Heavy-gauge replacement points cover for ignition protection and reliable performance.

€5.70 €7.72

-€3.45

DRAG SPECIALTIES Spherical Radius Points Cover — Chrome

Radiused points cover; matches brake caliper inserts and fork tube cap covers. Includes screws and gasket.

€9.75 €13.20

-€52.18

DRAG SPECIALTIES Rocker Box Kit — Chrome

Precision construction with exact dimensions; sold each (two required per motor).

€147.44 €199.62

-€77.44

DRAG SPECIALTIES Rocker Box Kit — Rocker Box cover, Chrome, 037001-BX-LB2

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€218.84 €296.28

-€20.25

DRAG SPECIALTIES Rocker Box Kit — Chrome, Top

Precision construction for a leakproof fit; sold individually — two required per motor.

€57.20 €77.45

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€40.44

DRAG SPECIALTIES Oil Pump Assembly — Aluminum, PN 89239

High-quality replacement cast-aluminum pump body with steel gears and shaft. Raw cast aluminum finish. Gaskets and seals included; mounting hardware sold separately.

€114.28 €154.72

-€42.89

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€121.22 €164.11

-€15.99

DRAG SPECIALTIES Oil Pump Parts — Gerotor Scavenge, 88721

Assorted replacement components for oil pump service and repair.

€45.19 €61.18

High Volume Oil Pump — air-cooled models only

-€32.48

DRAG SPECIALTIES High Volume Oil Pump — air-cooled models only

Increases feed and scavenge capacity for M8 fourth generation engines; fits air-cooled models only.

€91.77 €124.25

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company