Engine (8)

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€47.62

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€185.22 €232.84

-€36.91

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€143.55 €180.46

Replacement Master Cylinder Cover Gaskets — Front, 10-pack

-€4.48

DRAG SPECIALTIES Replacement Master Cylinder Cover Gaskets — Front, 10-pack

Replacement cover gasket for stock master cylinder. Sold individually for retail; dealer multi-packs available.

€12.66 €17.14

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€35.43

JIMS Hydrosolid Tappets — 0.8425" diameter

Perform like hydraulics up to 5,500 rpm, then convert to solid tappets for roughly 3–6 more usable horsepower; prevents hydraulic pump-up at high rpm; requires adjustable pushrods; made in the U.S.A.

€137.81 €173.24

-€48.84

JIMS Hydrosolid Tappets — 0.9035" diameter

Performs like a self-adjusting fluid lifter to 5,500 rpm, then becomes a solid lifter for about 3–6 additional hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€26.20

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€101.89 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

Connecting Rod Assembly — Vendor Part Number 2427586A-BX-LB1

-€77.08

DRAG SPECIALTIES Connecting Rod Assembly — Vendor Part Number 2427586A-BX-LB1

Complete, ready-to-install connecting rod kit engineered for reliable replacement of stock components.

€217.84 €294.92

-€31.17

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

-€9.44

JIMS Oil Pump Component — 26346-69/70

Replacement oil pump component for Big Twin models.

€36.69 €46.13

Oil Pump Component — Idler gear, 26317-68A

-€12.82

JIMS Oil Pump Component — Idler gear, 26317-68A

Replacement component for Big Twin models; precision-machined to restore lubrication performance and reduce noise.

€49.89 €62.71

-€14.02

JIMS Oil Pump Component — JIMS idler gear

Replacement component for Big Twin lubrication systems. Precision‑machined for durability and proper fit.

€54.52 €68.54

-€7.44

JIMS Gear-Side Pinion Shaft Nut — 5/8-24

High-strength pinion shaft nut designed for secure gear-side installation and long service life.

€28.92 €36.36

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

-€6.48

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

-€9.31

DRAG SPECIALTIES Heavy-Duty Top Motor Mounts — Chrome, Kit

Plated heavy-duty top motor mounts, 30% thicker than stock. Includes plated choke/horn brackets; select part numbers include socket-head hardware.

€26.32 €35.63

-€12.39

DRAG SPECIALTIES Heavy-Duty Top Motor Mounts — Chrome

Chrome-plated heavy-duty mounts, 30% thicker than stock; include chrome choke/horn brackets and socket-head hardware for select PART #s.

€35.01 €47.40

-€5.92

DRAG SPECIALTIES Oil Pressure Gauge Mount

Chrome mount attaches at the crankcase and rocker box mounting bolt for an unobstructed view; stock sending unit must be removed and gauge sold separately.

€16.70 €22.62

-€11.32

DRAG SPECIALTIES Air Cleaner Support Bracket Kit — Chrome, Gray

Secure support bracket kit for air cleaner; includes all gaskets and mounting hardware. Breather kits sold separately.

€32.00 €43.32

-€5.90

DRAG SPECIALTIES Crankcase Vent Filter Assembly — 3/8" I.D., Chrome

One-piece crankcase vent filter assembly with filter clamp and die-cast mounting base; accepts 3/8" I.D. hose. Replacement filters sold separately.

€16.68 €22.58

-€3.24

DRAG SPECIALTIES Crankcase Vent Replacement Filter — Aluminum, chrome top

Replacement filter element for crankcase venting. Replacement filters sold separately.

€9.16 €12.40

-€3.24

DRAG SPECIALTIES Crankcase Vent Replacement Filter — Aluminum, Black

Replacement vent filter that helps keep engine breathers clear. Replacement filters sold separately. Simple installation for routine maintenance.

€9.16 €12.40

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company