Engine (8)

Idler Gear & Circuit Breaker Bushings — Pair

-€5.71
Out of Stock

EASTERN MOTORCYCLE PARTS Idler Gear & Circuit Breaker Bushings — Pair

Precision idler gear and circuit breaker bushings engineered for reliable alignment and reduced wear.

€16.17 €21.88

-€14.11
Out of Stock

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

-€24.91
Out of Stock

S&S CYCLE Pinion Gear — 1.4737"–1.4745"

High-quality pinion gears: carefully machined, heat-treated and finish-ground. Made in the USA.

€96.90 €121.81

Out of Stock

EASTERN MOTORCYCLE PARTS 4-Speed Gear Spacers

Gear spacers specifically designed for 2-stroke ATVs, ensuring optimal performance and gear engagement.

€16.82

-€2.59
Out of Stock

EASTERN MOTORCYCLE PARTS Retaining Ring — 10 pack

Durable stamped retaining ring for reliable axial retention. Made in the U.S.A.

€7.33 €9.92

-€29.28
Out of Stock

S&S CYCLE Pinion Gear — 1.4470"–1.4475"

Precision-machined, heat-treated and finish ground pinion gear for reliable performance. Made in the USA.

€113.84 €143.12

-€24.91
Out of Stock

S&S CYCLE Pinion Gear — 1.4715"–1.4721"

Precision-machined and finish-ground pinion gear. Made in the USA.

€96.90 €121.81

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50
Out of Stock

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26
Out of Stock

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

Out of Stock

ANDREWS EZ-Install Pushrods

EZ-Install Pushrods simplify maintenance by allowing cam changes without removing rocker boxes or the gas tank.

€205.40

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

Out of Stock

ANDREWS Cams for Gear Drives

Precision-engineered Cams for Gear Drives, made in the USA from durable alloy steel, requiring a four-gear set for installation.

€360.98

Out of Stock

ANDREWS Cam Set for Chain Drive

Upgrade your Harley-Davidson with our Cam Set for Chain Drive, featuring precision engineering and high-quality alloy steel construction.

€323.16

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€57.28
Out of Stock

S&S CYCLE 514 Camshaft — 84–93 cu in, ≤9:1

Proven 514 camshaft for 84–93 cu in motors. Optimized for 2,500–5,000 rpm midrange performance. Requires spring spacing and high-performance lifters; installer must verify clearances.

€222.75 €280.03

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

-€57.28
Out of Stock

S&S CYCLE 520 Camshaft — 520 Series grind, 0.520" lift, 232°/220° duration

Dyno- and track-tested cam offering strong low- to mid-range power for 80"–96" motors. Compatible with hydraulic tappets; requires high-lift springs. Made in USA.

€222.75 €280.03

-€57.28
Out of Stock

S&S CYCLE 561 Camshaft — 256° exhaust, 252° intake, gear type

Dyno-, street- and track-tested camshaft that delivers strong midrange power for 80"–96" engines (9.5:1–10.5:1); requires high-lift springs and professional installation.

€222.75 €280.03

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78
Out of Stock

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine