Engine (8)

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Oil Line O-Ring — JAMES GASKET, JGI-11326, 10-pack

-€2.96

JAMES GASKET Oil Line O-Ring — JAMES GASKET, JGI-11326, 10-pack

Leak-resistant o-ring for engine oil lines. Made in the U.S.A.

€10.08 €13.04

Throttle to Intake O-Ring — Intake manifold

-€2.76

JAMES GASKET Throttle to Intake O-Ring — Intake manifold

Reliable o-ring seal for the throttle-to-intake connection; made in the U.S.A.

€9.36 €12.12

-€0.80

JAMES GASKET Starter O-Ring — Yoke

Precision starter O-ring for reliable sealing. Made in the U.S.A. Durable, oil- and heat-resistant elastomer.

€2.69 €3.49

-€2.69

JAMES GASKET 5th Gear O-Ring & Seal — Main crankshaft, oil type, 10-pack

Durable 5th Gear sealing set, made in the U.S.A., ideal for routine maintenance and leak prevention.

€9.07 €11.76

-€4.05

JAMES GASKET Rocker Cover Washer — 20-pack, Rocker Cover, JGI-6589

Precision flat metal rings for secure engine cover fastening. Made in the U.S.A.

€13.80 €17.85

-€8.30

JAMES GASKET Breather Seal — Rocker cover, breather

Reliable, low-profile seal that prevents leaks and keeps contaminants out. Made in the U.S.A.

€28.23 €36.53

Shifter Shaft Seal — Clutch release lever, JGI-37101-84-B

-€5.47

JAMES GASKET Shifter Shaft Seal — Clutch release lever, JGI-37101-84-B

Replacement shifter shaft seal restores proper sealing and helps prevent leaks. Direct-fit design for straightforward installation; verify compatibility before fitting.

€18.63 €24.10

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

On sale!
-€26.50

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€103.07 €129.57

-€6.97

JAMES GASKET Main Drive Gear Seal Kit — 5-pack

Top-quality main drive gear shaft seals for reliable protection and reduced leakage.

€23.68 €30.65

-€10.35

JAMES GASKET Seal — Rocker Cover, 5 Pack

Durable seal engineered for reliable leak protection. Made in the U.S.A.

€35.22 €45.57

-€6.32

JAMES GASKET Seal — Intake Manifold, 10-pack

Durable replacement seal for critical engine sealing points. Made in the U.S.A.

€21.50 €27.82

Replacement Gaskets, Seals & O-rings For Big Twin Transmissions — Shifter shaft

-€1.11

JAMES GASKET Replacement Gaskets, Seals & O-rings For Big Twin...

Complete set of replacement gaskets, seals, and O-rings for Big Twin transmissions. Made in the U.S.A.

€3.76 €4.87

-€6.03

JAMES GASKET Seal — Inner Primary

Durable, leak-resistant seal made in the U.S.A.; precision molded for reliable fit.

€20.50 €26.53

-€4.62

JAMES GASKET O-Ring — 10-pack

Durable sealing o-ring for general maintenance and repair. Made in the USA.

€15.69 €20.31

-€3.14

JAMES GASKET O-Ring — 25 Pack

Durable sealing ring for mechanical assemblies. Made in the USA.

€10.68 €13.82

-€1.50

JAMES GASKET O-Ring — 25-pack, Rubber

Durable sealing ring for general-purpose maintenance and repairs.

€5.13 €6.63

-€9.45

JAMES GASKET Drain Plug O-Ring — 100 pack

Reliable o-ring for drain plugs—resists oil and heat, easy to install for routine maintenance.

€32.14 €41.59

-€3.47

JAMES GASKET Drain Plug O-Ring — 10-pack

Reliable o-ring designed to seal the drain plug on compatible Harley-Davidson motorcycles; replace during oil changes.

€11.81 €15.28

-€1.36

JAMES GASKET Shifter Shaft Seal — Shifter Shaft

Replacement seal for the shifter shaft to stop leaks and restore shift feel.

€3.84 €5.20

Derby/Inspection Cover Seal Kit — Fits '99–'05 Dyna, '00–'06 Softail

-€6.68

JAMES GASKET Derby/Inspection Cover Seal Kit — Fits '99–'05 Dyna, '00–'06...

High-quality James Gaskets molded rubber cover seals and O-rings. Seals, not gaskets; fit billet, stamped or cast inspection and derby covers. Made in the USA.

€22.73 €29.41

Derby/Inspection Cover Seal Kit — For '99-'06 Touring, Kit

-€6.68

JAMES GASKET Derby/Inspection Cover Seal Kit — For '99-'06 Touring, Kit

Genuine James Gaskets seals and O-rings. Molded rubber, beaded oil seals with metal inserts for inspection and derby covers. Made in the USA.

€22.73 €29.41

Exhaust Port Gasket Kit — JGI-65324-83-KW2, Stainless Steel

-€6.02

JAMES GASKET Exhaust Port Gasket Kit — JGI-65324-83-KW2, Stainless Steel

Complete exhaust port gasket kit with gaskets and heavy-duty flange or chrome acorn nuts with washers. Made in the USA.

€20.45 €26.47

-€6.02

JAMES GASKET Exhaust Port Gasket Kit — Graphite

Exhaust port gasket kit with gaskets and heavy-duty nuts and washers, made in the USA.

€20.45 €26.47

Exhaust Port Gasket Kit — Copper, Graphite, JGI-65324-83-KCR2

-€6.02

JAMES GASKET Exhaust Port Gasket Kit — Copper, Graphite, JGI-65324-83-KCR2

Complete exhaust port gasket kit with gaskets and heavy-duty flange hex or chrome acorn nuts with washers. Made in the USA. Verify fitment before installation.

€20.45 €26.47

-€48.05

JAMES GASKET Complete Gasket Kit — 1.14 mm (0.045 in)

Complete set of gaskets, oil seals, and o-rings for XL/XG engine rebuilds. Made in USA.

€163.35 €211.40

On sale!
-€18.13

JAMES GASKET Metal Base Gaskets — Cylinder base, 0.79 mm (0.031")

Silicone-beaded base gaskets that resist brittleness, require no sealer, and are made in the USA.

€29.38 €47.51

-€2.67

JAMES GASKET Cam Cover Gasket — Thickness 0.91 mm

Replacement gasket for cam chests, made in the USA for dependable sealing.

€9.07 €11.74

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine