Engine (8)

Cam Chest Kit without Cams for Chain Drive M8 — Water cooled, Chrome

-€242.88

S&S CYCLE Cam Chest Kit without Cams for Chain Drive M8 — Water cooled,...

Billet-aluminum cam chest and oil pump with removable passage plugs, independent scavenge sections, debris screens and an adjustable pressure relief valve. Includes tappets, tappet cuffs, pushrods and cam chain tensioner. Not for 121" VVT models.

€946.39 €1,189.27

Cam Chest Kit without Cams for Gear Drive Twin Cam — Oil cooled, Black

-€249.93

S&S CYCLE Cam Chest Kit without Cams for Gear Drive Twin Cam — Oil...

Billet cam chest kit (no cams) for Gear Drive Twin Cam engines. Improves oil flow and valve-train stability; includes oil pump, pushrods, tappets and tappet cuffs.

€973.86 €1,223.79

-€320.80

S&S CYCLE Cam Chest Kit without Cams for Gear Drive Twin Cam — Oil...

Complete cam chest kit (no cams) for Gear Drive Twin Cam with TC3 oil pump, pushrods, tappets and hard-anodized tappet cuffs; higher flow and improved reliability.

€1,263.00 €1,583.80

Cam Chest Kit without Cams for Gear Drive Twin Cam — Oil-cooled, Chrome

-€249.93

S&S CYCLE Cam Chest Kit without Cams for Gear Drive Twin Cam —...

Precision-machined cam chest assembly (no cams) that increases oil flow, improves valve-train stability and reduces noise. Includes oil pump, pushrods, tappets and tappet cuffs.

€973.86 €1,223.79

Cam Chest Kit without Cams for Chain Drive Twin Cam — black pushrod tubes

-€249.93

S&S CYCLE Cam Chest Kit without Cams for Chain Drive Twin Cam — black...

Precision cam chest kit for chain drive Twin Cam engines. Increases oil flow, reduces valve train noise, includes Quikee pushrods and S&S precision tappets. Ships without cams.

€973.86 €1,223.79

Cam Chest Kit without Cams for Chain Drive Twin Cam — Chain, chrome pushrod tubes

-€303.28

S&S CYCLE Cam Chest Kit without Cams for Chain Drive Twin Cam — Chain,...

Service-ready cam chest kit for Twin Cam engines. Precision-machined oil pump/cam plate, removable passage plugs, debris screens, magnet, and adjustable pressure relief valve. Improves oil flow and valve-train performance.

€1,179.72 €1,483.00

-€326.57

S&S CYCLE Cam Chest Kit without Cams for Chain Drive Twin Cam — black...

Precision billet-aluminum oil pump and cam plate assembly with removable passage plugs, independent scavenge sections, debris screens, magnet trap, Quikee pushrods and S&S precision tappets.

€1,272.45 €1,599.02

Cam Chest Kit without Cams for Chain Drive Twin Cam — Chain drive, chrome pushrod tubes

-€312.99

S&S CYCLE Cam Chest Kit without Cams for Chain Drive Twin Cam — Chain...

Cam chest kit for chain drive Twin Cam engines. Supplied without cams; includes precision oil pump/cam plate, pushrods and tappets. Improves oil flow and reduces valve train noise.

€1,217.47 €1,530.46

-€14.58

FEULING OIL PUMP CORP. Cam Chain Tensioner — Stock Replacement, PN 8073

Precision billet aluminum housing with injection-molded nylon pad enhanced with PTFE. Single-piston design matching stock pressure, includes ARP® 12-point hardware. Made in USA.

€56.82 €71.40

-€159.84

FEULING OIL PUMP CORP. Race Series® Chain Drive Camshaft Kit — Chain Drive, P/N 1459

Complete Race Series® camshaft kit with Reaper® cam, full-travel hydraulic lifters (0.200" travel), gasket/o-ring kit, ARP cam/crank fasteners and installation kit. Made in the USA. Not for '23-'24 models with 121" VVT motors.

€621.59 €781.43

-€3.59

S&S CYCLE Camshaft Outer Ball Bearing — S&S CYCLE, 31-4081

OE-quality replacement camshaft outer ball bearing. Sold each. Made in the U.S.A.

€13.98 €17.57

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€204.38

S&S CYCLE 510G Camshaft Kit — 510 Series, 252° exhaust, 238° intake

Bolt-in 510G cam kit for 88", 95", 96" and 103" engines. Includes camshafts, outer cam drive gear kit and installation hardware. Stock pushrods and valve springs acceptable.

€796.36 €1,000.74

-€3.83

S&S CYCLE Idler Gearshaft — S&S Cycle, 31-2039

Idler gearshaft for generator crankcase gear kits; precision machined and made in the USA.

€14.91 €18.74

-€363.35

S&S CYCLE Generator Engine Case Gear Kit — 33-4226, Engine Case, Raw

Includes circuit breaker drive gear, idler gear assembly and circuit breaker shaft gear with shims. Shaft parts sold separately. Made in the U.S.A.

€456.52 €819.87

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€4.69

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005 in, 10-pack

Precision cam shims for accurate cam setup; made in the USA.

€5.02 €9.71

$Cam Shims — 0.015\", 10 pack, 1st/3rd/4th gear$

-€2.54

EASTERN MOTORCYCLE PARTS Cam Shims — 0.015\", 10 pack, 1st/3rd/4th gear

Precision shims for cam setup. A must when setting up new cams. Made in the USA.

€7.17 €9.71

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8 Pack, breather valve

-€8.37

EASTERN MOTORCYCLE PARTS Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8...

Set of washers for breather valves. Use only with plastic breather valves; do not mix plastic and steel parts. Made in the U.S.A.

€23.66 €32.03

-€9.21

EASTERN MOTORCYCLE PARTS Cam Shims — 0.050"–0.095", 10-pack

Precision shims for accurate valve adjustment. Made in the U.S.A.

€26.01 €35.22

Cam Support Plate/Cover Bushing — A-25586-37, Eastern Motorcycle Parts

-€9.21

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — A-25586-37, Eastern...

Precision support bushing for cam cover assemblies. Press-fit installation; check service manual for fitment and torque.

€26.01 €35.22

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€15.56

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Part No. 15-0127

Complete cam bushing kit with bushings, bearings, lock pins, and thrust plate; standard sizes for easy replacement.

€60.45 €76.01

-€12.72

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Cam kit, 15-0129

Includes cam and gear shaft bushings/bearings, lock pins, and a thrust plate. All parts are standard sizes. Made in the U.S.A.

€49.42 €62.14

-€23.28

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — 15-0131

Complete cam and gear shaft bushing kit for Big Twin engines; includes lock pins and thrust plate. Made in the U.S.A.

€65.81 €89.09

-€9.10

EASTERN MOTORCYCLE PARTS Cam Bushing — Support plate, A-25581-70

High-quality OEM cam bushing. Made in the U.S.A.

€25.70 €34.80

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

-€22.44

S&S CYCLE Pinion Gear — 1.4729–1.4737 in

Precision-machined, heat-treated pinion gear, finish ground for reliable engagement. Made in the USA.

€87.26 €109.70

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine