Engine (7)

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

Race Series® Full-Travel Hydraulic Lifters — 0.8420"–0.8423", hydraulic, full-travel, set of 4

-€61.27

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.8420"–0.8423",...

Full-travel hydraulic lifters with .200" travel for high-lift cams; slower bleed-down, maintains critical oil flow, set of 4, made in USA; recommended over 185 lb seat pressure.

€238.35 €299.62

Race Series® Full-Travel Hydraulic Lifters — 0.8435–0.844 in, set of 4

-€73.65

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.8435–0.844 in,...

Full-travel hydraulic lifters with .200" of travel for high-lift cams; slower bleed-down rate improves valvetrain stability and reduces valve float.

€286.41 €360.06

-€7.59

FEULING OIL PUMP CORP. Anti-Rotation Lifter Pins — Oversize (+0.002"), 2 Pack

Recommended 0.002"–0.003" lifter-to-pin clearance; restores balance and reduces engine noise. Made in the USA.

€29.55 €37.14

-€11.51

FEULING OIL PUMP CORP. Cylinder Head Plates — Cylinder, Pair

Replaces factory Screamin' Eagle® head plates; fastens with heavy-duty sticky tape. Made in the U.S.A.

€33.51 €45.02

Cylinder Head Breathers — 6061 T6 aluminum, anodized red, pair

-€99.18

FEULING OIL PUMP CORP. Cylinder Head Breathers — 6061 T6 aluminum, anodized red, pair

Precision-machined billet construction with square sealing surfaces.
Longer exit nipples with dual O-rings for improved sealing.
Optimized inlet sizing and placement for efficient engine breathing.
Five internal drain ports for controlled drainage and splash resistance.

€386.43 €485.61

-€16.25

FEULING OIL PUMP CORP. Rocker Shaft Shims — 3 Packs of 6, Rocker Shaft

Tightens rocker arm end play to reduce noise; recommended side clearance 0.0035"–0.005". Helps reduce wear on M8 cylinder head standoffs. Professional installation required.

€63.23 €79.48

-€2.13

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8" NPT male, 90°, Chrome

Durable hose and tank fitting with a corrosion-resistant plated finish; made in the United States.

€8.31 €10.44

-€1.23

GARDNER-WESTCOTT Hose and Tank Fitting — Chrome, 1/8" NPT male

Compact fitting for secure hose-to-tank connections. Precision-made for reliable sealing.

€3.90 €5.13

Master Cylinder Elbow Fitting — 1/8" NPT male, 90° connector, Chrome

-€3.00

GARDNER-WESTCOTT Master Cylinder Elbow Fitting — 1/8" NPT male, 90° connector,...

Right-angle elbow with inverted-flare profile and plated finish, assembled in the U.S.A.

€11.66 €14.66

Hose and Tank Fitting — 1/8" NPT (male), 3/8" hose, 90° angle, Chrome

-€4.46

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8" NPT (male), 3/8" hose, 90° angle,...

Durable hose and tank fitting with a chrome finish; made in the USA. Compact right-angle design for tight routing.

€17.34 €21.80

Hose and Tank Fitting — 1/8" NPT (Male), 5/16" hose fitting, 90° angle, Chrome

-€2.12

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8" NPT (Male), 5/16" hose fitting,...

Compact hose-to-tank fitting. Precision-made for leak-resistant connections. Sold each.

€8.25 €10.37

Hose and Tank Fitting — 1/4" hose, 1/8" NPT male, 90° angle, chrome finish

-€1.98

GARDNER-WESTCOTT Hose and Tank Fitting — 1/4" hose, 1/8" NPT male, 90° angle,...

Secure, leak-resistant fitting for hose-to-tank connections. Easy to install with durable construction.

€7.73 €9.71

$Hose and Tank Fitting — 3/8\" NPT male, chrome$

-€1.17

GARDNER-WESTCOTT Hose and Tank Fitting — 3/8\" NPT male, chrome

Compact fitting for secure hose-to-tank connections. Easy installation and low profile.

€4.57 €5.74

-€1.88

GARDNER-WESTCOTT Chrome Motor Case Breather Fitting — 1/4" NPT male, 3/8" hose

Highly polished, plated breather fitting for reliable motor case ventilation; made in the USA.

€7.32 €9.20

Chrome Motor Case Breather Fitting — 1/4" NPT female, 1/4" NPT male, 90°

-€2.96

GARDNER-WESTCOTT Chrome Motor Case Breather Fitting — 1/4" NPT female, 1/4" NPT...

Highly polished and plated breather fitting. Made in the USA.

€11.55 €14.51

-€3.05

GARDNER-WESTCOTT Chrome Motor Case Breather Fitting — 1/4" NPT female/male, 45°

Durable venting accessory with a plated finish. Made in the USA. Reliable, easy to install, sold individually.

€11.86 €14.91

Hose and Tank Fitting — 1/4" NPT male, 1/8" NPT male, straight, chrome

-€1.71

GARDNER-WESTCOTT Hose and Tank Fitting — 1/4" NPT male, 1/8" NPT male,...

Corrosion-resistant hose and tank fitting made in the USA for reliable, compact connections.

€6.66 €8.37

-€1.36

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8" NPT male, 5/16" hose, Chrome

Durable hose and tank fitting with chrome finish. Made in the USA.

€5.27 €6.63

Hose and Tank Fitting — 1/8" NPT male, 3/8" hose, chrome finish

-€2.33

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8" NPT male, 3/8" hose, chrome finish

Durable fitting for oil systems that offers easy installation and reliable sealing.

€9.07 €11.40

$Hose and Tank Fitting — 1/8\" NPT male, straight, Chrome$

-€0.93

GARDNER-WESTCOTT Hose and Tank Fitting — 1/8\" NPT male, straight, Chrome

Durable fitting for secure, leak-resistant hose and tank connections. Made in the USA.

€3.64 €4.57

-€4.99

GARDNER-WESTCOTT Softail Seat Bolt Kit — Seat post, Chrome

Replacement bolt kit for Harley-Davidson FXST/FLST side-mount Softail seats; includes two 1/2"-13 x 5/8" button-head bolts and two chrome lock washers.

€19.42 €24.41

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€92.33

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — High-Flow, 6061 billet aluminum

Direct stock-replacement pump that eliminates blow-by and wet sumping; increases oil pressure and cooling; FEULING® design; made in USA.

€359.07 €451.40

-€92.33

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — High-Flow, Aluminum

Stock-replacement high-volume oil pump that eliminates blow-by and wet sumping. High-flow 2” gerotor gears, precision tolerances, and cooler oil temps for more rear-wheel power. Made in the USA.

€359.07 €451.40

Race Series® Oil Pump — 7075 billet aluminum, Red anodized, Part 7062

-€114.49

FEULING OIL PUMP CORP. Race Series® Oil Pump — 7075 billet aluminum, Red anodized,...

Blueprinted race oil pump that increases oil pressure and return volume, reduces sumping, and improves engine temperatures and power. Stock replacement for Twin Cam engines.

€445.24 €559.73

-€192.05

FEULING OIL PUMP CORP. HP+® Oil System Pack — Aluminum, Kit

Complete kit to finish a T/C® engine oiling system; increases oil pressure and flow, reduces temperatures, and includes pump, lifters and cam installation kit.

€746.85 €938.90

Race Series® Oil System Performance Pack — 7075 billet aluminum, red

-€234.06

FEULING OIL PUMP CORP. Race Series® Oil System Performance Pack — 7075 billet...

Complete kit to finish T/C® engine oiling systems; raises oil pressure and flow, reduces temperatures and wet sumping.

€910.23 €1,144.29

-€7.05

FEULING OIL PUMP CORP. Block Off Cam Plate — FEULING PARTS, P/N 8016

Seals hydraulic chain-tensioner openings for gear-driven cam installations. Made in the USA. Prevents oil leaks and simplifies assembly.

€27.41 €34.46

-€61.06

FEULING OIL PUMP CORP. OE+ Oil Pump — 6061 billet aluminum, aluminum finish

Direct-fit Feuling® OE+ replacement oil pump that increases oil pressure and scavenge return volume; competitively priced and made in the U.S.A.

€237.47 €298.53

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company