Engine (7)

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€3.12

KIBBLEWHITE Valve Seal — 4-pack

Seals for use with intake and exhaust valve guides; choker and lower-tension springs maintain sealing under heat and stress. Made in the United States.

€8.83 €11.95

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100", Length 4.550", Tulip Angle 23°

-€8.87

KIBBLEWHITE Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100",...

One-piece nitrided stainless-steel valve with stellite tip for superior wear resistance and reduced friction. Made in the USA.

€30.16 €39.03

-€9.73

KIBBLEWHITE Nitrided Valve — Stem 0.3095", Head 1.350", Length 4.640"

One-piece Stellite-tipped nitrided valve delivering superior wear resistance, reduced friction, and optimized flow. Made in the USA.

€33.05 €42.78

Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in length, 23° tulip

-€11.10

KIBBLEWHITE Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in...

Nitrided valve with stellite tip for reduced wear and friction; compatible with leaded and unleaded fuels. Made in USA.

€31.35 €42.45

Nitrided Valve — Standard, Head 1.750", Length 3.810", Stem 0.376"

-€6.07

KIBBLEWHITE Nitrided Valve — Standard, Head 1.750", Length 3.810", Stem...

Stellite-tipped nitrided stainless-steel valve offering superior wear resistance, lightweight profile, excellent flow, and fuel compatibility.

€23.56 €29.63

Nitrided Valve — Head diameter 1.950", Length 3.885", Stem diameter 0.3765", Intake

-€6.16

KIBBLEWHITE Nitrided Valve — Head diameter 1.950", Length...

One-piece stellite-tipped nitrided valve offering superior wear resistance, reduced friction, corrosion resistance, and excellent flow characteristics. Made in USA.

€23.92 €30.08

Nitrided Valve — Standard, Head 1.840", Stem 0.3100", Length 4.445"

-€7.63

KIBBLEWHITE Nitrided Valve — Standard, Head 1.840", Stem 0.3100", Length...

One-piece nitrided stainless-steel valve with stellite tip for reduced wear and improved flow.

Compatible with leaded and unleaded fuels; made in the USA.

€21.60 €29.23

Nitrided Valve — Head diameter 1.615", length 4.525", stem diameter 0.3096", tulip angle 29°

-€8.29

KIBBLEWHITE Nitrided Valve — Head diameter 1.615", length 4.525", stem...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction.

Lightweight profile, corrosion resistant, compatible with leaded and unleaded fuels.

€23.43 €31.72

-€13.25

KIBBLEWHITE Nitrided Valve — 1.935" head, 0.309" stem, 3.620" length

One-piece stellite-tipped nitrided valve offering improved wear resistance, corrosion resistance, and excellent flow characteristics. Compatible with leaded and unleaded fuels.

€37.39 €50.64

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

Cast Iron Valve Guide — Oversize (+0.001"), Inside Diameter 0.3098", Length 2.400"

-€2.29

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.001"), Inside Diameter...

Precision-machined valve guide compatible with no-lead fuel and multiple valve-stem materials. Made in the USA.

€7.77 €10.06

-€2.68

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.002"), ID 0.3098", L 2.400"

Precision valve guide compatible with unleaded fuel and all valve-stem materials. Made in the USA.

€7.60 €10.28

-€10.29

KIBBLEWHITE C630 Valve Guides — 2.40" length, 0.3095" ID

Precision-machined C630 valve guides with a tapered nose design for improved flow and OEM-style fitment. Made in the USA.

€29.15 €39.44

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine