Engine (7)

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€2.99
Out of Stock

COLONY Front Fender Mounting Hardware Kit — Front, Parkerized

Includes four locktabs and four bolts. Made in the U.S.A.

€8.43 €11.42

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78
Out of Stock

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium plated

-€6.12
Out of Stock

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium...

Complete rear fender mounting hardware kit with bolts, screws, nuts, and lockwashers; made in the U.S.A.

€23.78 €29.90

-€5.50
Out of Stock

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, Cadmium...

Complete hardware kit for rear fender installation; includes bolts, screws, nuts and lockwashers. Made in the U.S.A.

€21.38 €26.88

-€3.51
Out of Stock

COLONY FX Dash Mounting Hardware Kit — Chrome

Chrome plated dash mounting button Allen kit. Made in the USA.

€9.91 €13.42

-€2.17
Out of Stock

COLONY FX Dash Mounting Hardware Kit — Chrome, Silver

Chrome-plated button-head Allen kit for dash mounting; made in the USA.

€6.14 €8.31

Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — 3/8"-16, 5/16"-24 bolts, parkerized black

-€5.50
Out of Stock

COLONY Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — 3/8"-16,...

Kit includes three 3/8"-16 bolts, four 5/16" bolts, one nut, four 5/16"-24 nuts and four lock washers. Made in the U.S.A.

€21.38 €26.88

Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

-€4.59
Out of Stock

COLONY Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

Hinge bolt kit for floorboards — includes four shoulder bolts, four 1/4" flat washers, and four 1/4"-20 nylock nuts.

€12.99 €17.58

-€7.96
Out of Stock

COLONY Brake Stud Kit — Front, Cadmium plated

Includes one stud, stud washer, 7/16" washer, 7/16" -20 nut and 7/16" lockwasher; for front brake shoe service; Made in the U.S.A.

€22.49 €30.45

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64
Out of Stock

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€1.83
Out of Stock

COLONY Rear Brake Rod and Cable Adjusting Nut — Hex nut, chrome

Precision fastener for fine adjustment and secure linkage connections. Made in the U.S.A.

€5.16 €6.99

Rear Brake Rod and Cable Adjusting Nut — Rear brake, hex nut, cadmium plated

-€1.79
Out of Stock

COLONY Rear Brake Rod and Cable Adjusting Nut — Rear brake, hex nut,...

Adjusting nut for rear brake rod and cable. Quick installation and reliable performance. Made in the U.S.A.

€5.03 €6.82

-€4.39
Out of Stock

COMETIC Cylinder Head Gasket — Cylinder head, 0.81 mm (0.032")

Durable cylinder head gasket engineered for reliable sealing and long service life.

€12.47 €16.86

Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium Plated

-€7.73
Out of Stock

COLONY Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium...

Complete kit includes pivot stud, locating block, nut, and lockwasher for rear brake anchor and pivot assemblies.

€30.10 €37.83

-€44.64
Out of Stock

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€3.35
Out of Stock

COLONY Rear Brake Caliper Anchor Kit — 2564-3, Silver, Chrome

Includes 1 pin, 1 flat washer and 1 cotter pin. Made in the U.S.A. Durable replacement anchor hardware.

€9.47 €12.82

-€39.78
Out of Stock

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

Rear Brake Pivot Bolt Kit — Shoulder (pivot), hex head, cadmium plated

-€6.39
Out of Stock

COLONY Rear Brake Pivot Bolt Kit — Shoulder (pivot), hex head,...

Includes one pivot bolt, one washer, and one spacer. Made in the U.S.A.

€18.06 €24.45

-€2.03
Out of Stock

COLONY Kickstarter Spring Studs — Cadmium plated

Quality reproduction of the original part. Made in the U.S.A.

€5.73 €7.76

-€2.55
Out of Stock

COLONY Kickstarter Spring Studs — Chrome

Quality reproduction of the original part with precise fit and durable construction. Made in the U.S.A.

€7.23 €9.78

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€5.97
Out of Stock

COLONY Primary Cover Filler Caps — Primary cover, silver

Low-profile closures that provide a clean, secure seal for service openings. Reliable fit and easy installation.

€16.88 €22.85

-€52.02
Out of Stock

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€6.08
Out of Stock

COLONY Primary Cover Filler Caps — Chrome

Secure, easy-install filler caps that protect fluids and keep contaminants out. Made in the U.S.A.

€23.66 €29.74

-€1.15
Out of Stock

COMETIC Intake Manifold Seal — cylinder head, intake manifold fitment

Durable seal for reliable long-term sealing in the engine intake system. Made in the USA.

€3.25 €4.40

-€52.02
Out of Stock

ANDREWS EV7 Cam — 266° duration, 0.560" lift

Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — EV38 grind, Exhaust 252°, Intake 238°

Performance cam for Big Twin street and drag bikes. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV51 Cam — Intake 252°, Exhaust 256°, 0.510" lift

Broad-range EV51 camshaft for modified street motors. 3000–6500 rpm powerband, easy install, works with stock hydraulics. Made in USA. Check clearances.

€202.28 €254.30

Primary Gasket Kit — 1.52 mm (0.060"), AFM (Aluminum Foam Material)

-€5.07
Out of Stock

COMETIC Primary Gasket Kit — 1.52 mm (0.060"), AFM (Aluminum Foam...

Complete primary gasket kit with all gaskets, seals and O-rings for inner and outer primary. Heat resistant above 205°F with ~85% shape recovery; does not require gasket sealer. Made in USA.

€14.34 €19.41

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine