Engine (6)

-€312.93

S&S CYCLE Engine Case — 3.750" bore, Silver powder-coated

Replacement Twin Cam "A" engine case for stock H-D chassis (carb and EFI). Greater strength than stock; Timken®-style sprocket shaft bearings; O-ring sealed passages; includes crankcase breather reed valve. Made in the USA. Professional installation required.

€569.99 €882.92

-€13.23

ANDREWS Cam Sprocket — 17T

Precision cam sprocket built for reliable valve timing and long service life.

€56.31 €69.54

-€50.40

ANDREWS M462 Cam — 220° exhaust, 200° intake, 0.460" lift

Bolt-in cam for 107"–114" engines. 127 ft lb torque, 109 hp from 1200–5500 rpm. Designed for strong midrange power and direct bolt-in fitment.

€196.40 €246.80

M464 Cam — Exhaust duration 230°, Intake duration 210°, Exhaust lift 0.460", Intake lift 0.464"

-€50.40

ANDREWS M464 Cam — Exhaust duration 230°, Intake duration 210°,...

Great mid-range torque and power with free-flow exhaust pipes and injector tuning.

€196.40 €246.80

-€1.57

S&S CYCLE Dowel Pin .430x.499 — Crankcase

Steel dowel pin, .430 x .499 in — precise replacement pin for alignment and fitment.

€6.14 €7.71

-€5.62

S&S CYCLE Crankcase Screen Oil — 5-piece kit

High-flow crankcase screen that traps debris without restricting oil pressure.

€11.10 €16.72

-€1.37

S&S CYCLE Crankcase Screen Oil — S&S Cycle, 31-2010

Pack of 5 crankcase oil screens. Durable mesh construction for reliable debris capture. Easy to install during oil changes.

€5.32 €6.69

-€549.14

S&S CYCLE MK-Series Engine Case — Black, Fits stock touring frame

Complete MK-Series crankcase assembly with stock deck height and large-volume sump. Reinforced for high-stress reliability; includes MSO and full hardware kit.

€2,139.73 €2,688.87

Crankcase MK-Series 4-1/2" — accepts up to 4.5" cylinders, 4.695" spigot bore, Black

-€577.44

S&S CYCLE Crankcase MK-Series 4-1/2" — accepts up to 4.5" cylinders,...

Ready for high-power M8 builds; accepts cylinders up to 4 1/2", with machined oil scraper, large sump and 4.695" spigot bore. No frame modifications required.

€2,250.00 €2,827.44

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€658.49

S&S CYCLE Crankcase MK-Series 4.5" — Black, 4.695" spigot bore

High-capacity engine cases for M8 platforms; accept cylinders up to 4.5", machined oil scraper, large sump, 4.695" spigot bore.

€2,565.77 €3,224.26

-€2.05

S&S CYCLE Parallel Key — 0.188" x 0.150" x 0.420", Steel

Precision individual key; dimensions 0.188" x 0.150" x 0.420"; made in the U.S.A.

€7.95 €10.00

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€77.57

S&S CYCLE Crankpin Assembly — P/N 34-2001

Includes crankpin, nuts and key. Made in the U.S.A.

€244.78 €322.35

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€9.72

S&S CYCLE Cam Installation Kit — Chain-drive

Complete set of parts for servicing or replacing gear- or chain-drive cams in Milwaukee 8 motors. Made in the USA.

€37.78 €47.50

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

-€35.40

S&S CYCLE Crankpin Assembly — S&S CYCLE 34-2102, Steel

Complete crankpin assembly with nuts and key. Fits stock and most aftermarket flywheels. Made in the USA.

€137.66 €173.06

-€26.52

S&S CYCLE Pinion Gear for Two-Gear Driven Cams — Undersize

Precision pinion gear for two-gear driven cam systems. A two-gear set is required; gears sold separately. Made in the U.S.A.

€103.14 €129.66

-€35.40

S&S CYCLE Crankpin Assembly — Vendor Part Number 34-2503

Direct replacement for stock and S&S flywheels. Includes crankpin, nuts and key. Made in the USA.

€137.66 €173.06

-€22.44

S&S CYCLE Pinion Gear — 1.4751"–1.4756", Orange

High-quality, precision-machined pinion gear that is heat-treated and finish ground. Made in the U.S.A.

€87.26 €109.70

-€39.72

S&S CYCLE Pinion Shaft Assembly — Silver, 33-2024

Includes shaft, nut and keys. For use with standard bearing diameter. Made in the USA.

€154.44 €194.16

-€24.43

S&S CYCLE Pinion Gear — 1.4745–1.4751 in, white

High-quality pinion gear, precision machined, heat-treated and finish-ground. Made in the U.S.A.

€77.09 €101.52

-€39.72

S&S CYCLE Pinion Shaft Assembly — 33-2027, Silver

Includes shaft, nut and keys. Made in the USA. For use with standard bearing diameter.

€154.44 €194.16

-€8.82

S&S CYCLE Motor Sprocket Shaft Spacer — Counterbalance shaft, 31-4011

Precision spacer for motor sprocket shaft, designed for S&S Super Stock® and special application crankcases.

€34.28 €43.10

-€38.88

S&S CYCLE Sprocket Shaft Assembly — Fits S&S® SE or SL flywheels only

Includes tapered shaft, nut and keys. For use with standard diameter bearing. Fits S&S® SE or SL flywheels only. Made in the USA.

€151.51 €190.39

-€2.35

S&S CYCLE Hydraulic Tensioner Oil Block Off Cover — 106-5723

Block-off cover for hydraulic tensioner oil passages; machined fit for gear drive cam chest kits. Kit includes installation hardware.

€9.14 €11.49

-€1.44

S&S CYCLE Internal Retaining Ring Pack — 5 pack

Precision internal retaining rings formed from spring steel to secure components in internal grooves; ideal for maintenance and rebuilds.

€3.48 €4.92

-€20.40

S&S CYCLE Cam Chain Tensioner — 330-0737, Black

Precision-machined cam chain tensioner with larger piston, thicker pad and direct chain oiling for longer life.

€79.33 €99.73

Dual Spray Piston Cooling Jet Kit — Anodized aluminum

-€19.38

S&S CYCLE Dual Spray Piston Cooling Jet Kit — Anodized aluminum

Dual Spray jet kit cools both intake and exhaust piston sides for improved power and durability. Shortened nozzle increases rod clearance. Includes hardware and gaskets.

€75.56 €94.94

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company