Engine (6)

-€46.60

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€131.70 €178.30

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€35.43

JIMS Hydrosolid Tappets — 0.8425" diameter

Performs like hydraulic to 5,500 rpm then becomes solid, adding ~3–6 hp and preventing hydraulic pump-up. Made in the U.S.A.; requires adjustable pushrods.

€137.81 €173.24

-€48.84

JIMS Hydrosolid Tappets — Diameter 0.9035"

Performs like a hydraulic tappet to 5500 rpm, then converts to a solid tappet for an additional 3 to 6 usable hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€26.20

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€101.89 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

-€31.17

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

-€9.44

JIMS Oil Pump Component — 26346-69/70

Replacement oil pump component for Big Twin models.

€36.69 €46.13

Oil Pump Component — Idler gear, 26317-68A

-€12.82

JIMS Oil Pump Component — Idler gear, 26317-68A

Replacement component for Big Twin models; precision-machined to restore lubrication performance and reduce noise.

€49.89 €62.71

-€14.02

JIMS Oil Pump Component — JIMS idler gear

Replacement component for Big Twin lubrication systems. Precision‑machined for durability and proper fit.

€54.52 €68.54

Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100", Length 4.550", Tulip Angle 23°

-€8.87

KIBBLEWHITE Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100",...

One-piece nitrided stainless-steel valve with stellite tip for superior wear resistance and reduced friction. Made in the USA.

€30.16 €39.03

-€9.73

KIBBLEWHITE Nitrided Valve — Stem 0.3095", Head 1.350", Length 4.640"

One-piece Stellite-tipped nitrided valve delivering superior wear resistance, reduced friction, and optimized flow. Made in the USA.

€33.05 €42.78

-€7.44

JIMS Gear-Side Pinion Shaft Nut — 5/8-24

High-strength pinion shaft nut designed for secure gear-side installation and long service life.

€28.92 €36.36

Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in length, 23° tulip

-€11.10

KIBBLEWHITE Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in...

Nitrided valve with stellite tip for reduced wear and friction; compatible with leaded and unleaded fuels. Made in USA.

€31.35 €42.45

Nitrided Valve — Standard, Head 1.750", Length 3.810", Stem 0.376"

-€6.07

KIBBLEWHITE Nitrided Valve — Standard, Head 1.750", Length 3.810", Stem...

Stellite-tipped nitrided stainless-steel valve offering superior wear resistance, lightweight profile, excellent flow, and fuel compatibility.

€23.56 €29.63

Nitrided Valve — Head diameter 1.950", Length 3.885", Stem diameter 0.3765", Intake

-€6.16

KIBBLEWHITE Nitrided Valve — Head diameter 1.950", Length...

One-piece stellite-tipped nitrided valve offering superior wear resistance, reduced friction, corrosion resistance, and excellent flow characteristics. Made in USA.

€23.92 €30.08

Nitrided Valve — Standard, Head 1.840", Stem 0.3100", Length 4.445"

-€7.63

KIBBLEWHITE Nitrided Valve — Standard, Head 1.840", Stem 0.3100", Length...

One-piece nitrided stainless-steel valve with stellite tip for reduced wear and improved flow.

Compatible with leaded and unleaded fuels; made in the USA.

€21.60 €29.23

Nitrided Valve — Head diameter 1.615", length 4.525", stem diameter 0.3096", tulip angle 29°

-€8.29

KIBBLEWHITE Nitrided Valve — Head diameter 1.615", length 4.525", stem...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction.

Lightweight profile, corrosion resistant, compatible with leaded and unleaded fuels.

€23.43 €31.72

-€12.26

KIBBLEWHITE Nitrided Valve — 1.935" head, 0.309" stem, 3.620" length

One-piece stellite-tipped nitrided valve offering improved wear resistance, corrosion resistance, and excellent flow characteristics. Compatible with leaded and unleaded fuels.

€34.74 €47.00

-€6.48

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

Cast Iron Valve Guide — Oversize (+0.001"), Inside Diameter 0.3098", Length 2.400"

-€2.29

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.001"), Inside Diameter...

Precision-machined valve guide compatible with no-lead fuel and multiple valve-stem materials. Made in the USA.

€7.77 €10.06

-€2.68

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.002"), ID 0.3098", L 2.400"

Precision valve guide compatible with unleaded fuel and all valve-stem materials. Made in the USA.

€7.60 €10.28

-€10.29

KIBBLEWHITE C630 Valve Guides — 2.40" length, 0.3095" ID

Precision-machined C630 valve guides with a tapered nose design for improved flow and OEM-style fitment. Made in the USA.

€29.15 €39.44

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

-€3.96

HASTINGS Replacement Piston Rings — 3.437 in bore

Complete piston ring set with top and second compression rings and three-piece oil control rings; made in the USA; includes enough rings for two pistons.

€15.35 €19.31

-€3.96

HASTINGS Replacement Piston Rings — 3.437" bore, +0.040" oversize

Complete set of top, second, and oil control rings to restore sealing and oil control; includes rings for two pistons.

€15.35 €19.31

-€3.50

HASTINGS Replacement Piston Rings — bore 3.538", oversize +0.040"

Complete set of top, second, and oil control rings for two pistons.

Barrel‑face top rings, Napier second rings, and three‑piece Flex Vent oil rings for reliable sealing and oil control.

€11.04 €14.54

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company