Engine (6)

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€14.86

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€42.00 €56.86

-€16.94

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft, Kit

Includes one front ball bearing and one rear roller bearing with race for camshaft applications. Manufactured by Timken® Fafnir® and Koyo® Torrington®. Made in the USA.

€65.86 €82.80

-€14.58

FEULING OIL PUMP CORP. Cam Chain Tensioner — Stock Replacement, PN 8073

Precision billet aluminum housing with injection-molded nylon pad enhanced with PTFE. Single-piston design matching stock pressure, includes ARP® 12-point hardware. Made in USA.

€56.82 €71.40

-€159.84

FEULING OIL PUMP CORP. Race Series® Chain Drive Camshaft Kit — Chain Drive, P/N 1459

Complete Race Series® camshaft kit with Reaper® cam, full-travel hydraulic lifters (0.200" travel), gasket/o-ring kit, ARP cam/crank fasteners and installation kit. Made in the USA. Not for '23-'24 models with 121" VVT motors.

€621.59 €781.43

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, 10 pack

-€4.00

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, 10...

Stepless® ear clamps provide 360° stepless sealing, a narrow 5 mm band for concentrated compression, and tamper-evident construction.

€11.31 €15.31

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10 Pack

-€3.98

MOTION PRO Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10 Pack

360° Stepless® ear clamps with a 5 mm band for concentrated seal compression. Tampering visible; lightweight design. Side jaw clamp pincher tool sold separately.

€11.26 €15.24

Stepless® Ear Clamps for Fuel System — 5/16" ID vinyl, 1/4" ID braided, 10 pack, Silver

-€3.42

MOTION PRO Stepless® Ear Clamps for Fuel System — 5/16" ID vinyl, 1/4" ID...

360° stepless inner surface with no gaps, specially formed strip edges to prevent damage, narrow 5 mm band for concentrated seal compression, tamper-evident, lightweight design. Side jaw clamp tool sold separately.

€9.65 €13.07

Stepless® Ear Clamps for Fuel System — 3/8 in ID, 10 pack, Silver

-€3.96

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/8 in ID, 10 pack, Silver

360° Stepless® ear clamps with narrow 5 mm band, tamper-evident, lightweight, and reduced edge damage risk.

€11.19 €15.15

-€181.90

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — Red

High-volume pump increases oil pressure and flow, reduces temperatures and wet sumping; bench-tested relief valve and proven performance gains on M-Eight.

€707.36 €889.26

-€204.97

FEULING OIL PUMP CORP. Race Series Oil Pump/Camplate Kit — Red

High-performance oil pump and camplate kit that increases oil pressure and flow, reduces temperatures, and corrects common factory scavenge issues for M-Eight engines.

€797.13 €1,002.10

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€14.34

DRAG SPECIALTIES Billet Flange Adapter for Spigot-Type Carbs — Aluminum

Allows mounting of OEM late-model CV or Mikuni HSR-42 carbs on early Evolution two-bolt flange manifolds. Mounting holes 2.75" on center. Can be polished, plated or painted.

€30.73 €45.07

-€26.52

DRAG SPECIALTIES Deluxe Engine Bolt Cover Kit — Chrome, Silver

Covers raw OEM bolt heads on Harley-Davidson model engines. Kit includes motor, transmission, primary, and select chassis bolt covers. Easy to install; fasten with silicone (sold separately).

€74.94 €101.46

618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°, Exhaust lift 0.618", Intake lift 0.608"

-€82.27

FEULING PARTS 618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°,...

Race-oriented camshaft for high-performance engines. Requires supporting high-lift valvetrain, ported heads and intake; check clearances and match Race Series oiling system.

€320.52 €402.79

-€67.88

FEULING PARTS 487 Series Chain Drvie Camshaft — Chain Drive, Reaper

Aggressive bolt-in cam for 4.25" stroke, 114"–117" engines. Wide powerband; responds well to increased bore, compression, exhaust and intake changes. Specs measured at 0.050" with a 1.61 rocker ratio. Manufacturer advises against tuning beyond stock emissions.

€264.49 €332.37

-€59.01

FEULING PARTS Inner Cam Bearing — 20 Pack

Heavy-duty full-complement component designed for performance engines. Manufactured by Koyo® Torrington®. Made in the USA.

€229.52 €288.53

-€78.43

FEULING PARTS Inner Cam Bearing — 20-Pack, FEULING PARTS 2084

Heavy-duty full-complement bearing manufactured by Koyo Torrington in the USA for high-performance engine use.

€305.07 €383.50

-€13.31

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Engine, Black

Covers OEM bolt heads on engine, transmission and primary
Standard and deluxe kit options
Individual covers available
Easy installation with included instructions

€37.64 €50.95

-€6.76

FEULING PARTS Hydraulic Cam Chain Tensioner Pad — Stock replacement, P/N 8070

Injection molded nylon pad with PTFE for improved wear resistance. Includes pad and pin; fits factory aluminum housing and hydraulic unit. Made in the USA.

€26.32 €33.08

-€45.08

FEULING PARTS Hydraulic Cam Chain Tensioner Kit — 8084

Complete hydraulic camchain tensioner kit for stock M8 models. Includes sprocket, pad, pin, and spacers. Made in USA.

€175.68 €220.76

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, 375 lb @ 1.150" open height

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Direct bolt-in valve spring kit up to 0.650" lift; includes titanium retainers, machined seats, shims, locks and Viton® seals. Made in the USA.

€295.24 €371.16

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine