Engine (6)

Replacement Cylinder Head and Compliance Fitting Gaskets — 3.750" bore, 0.91 mm thickness, 5-pack

-€15.41

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Made in the USA replacement gasket set that restores proper sealing and reduces leaks. Easy to install with standard tools.

€52.39 €67.80

-€50.40

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€196.40 €246.80

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€50.40

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 €246.80

Cylinder Head Gasket — 3.875" bore, 0.76 mm (0.030")

-€12.79

COMETIC Cylinder Head Gasket — 3.875" bore, 0.76 mm (0.030")

High-quality cylinder head gasket engineered for long-term reliability. Fuel-resistant materials and composite/multi-layer construction provide a durable, leak-resistant seal. Made in the USA.

€36.18 €48.97

-€10.89

COMETIC Cylinder Head Gasket — 3.937" bore, 1.02 mm (0.040"), MLS

High-quality cylinder head gasket providing durable, fuel-resistant sealing. Made in the USA.

€30.83 €41.72

-€11.62

COMETIC Cylinder Head Gasket — 4.000 in bore, 0.030 in thickness, MLS

High-quality cylinder head gasket engineered for long-term sealing reliability and heat resistance. Made in the USA.

€32.86 €44.48

-€10.43

COMETIC Rocker Gasket — COMETIC, C9196F5, 5-pack

High-quality, fuel-resistant rocker gasket with Viton-coated sealing and stainless steel core. Made in the USA.

€29.49 €39.92

-€2.58

COMETIC Rocker Gasket — COMETIC, Inner, 5 Pack

High-quality rocker gasket designed for long-term reliability and fuel resistance. Viton-coated stainless steel core. Made in the USA.

€8.75 €11.33

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

Air Cleaner to Carburetor Gasket — Backplate, beaded, air cleaner-to-carburetor fit, 5 Pack

-€3.54

JAMES GASKET Air Cleaner to Carburetor Gasket — Backplate, beaded, air...

MicroPore® paper resists fluid migration and seals reliably up to 500°F. Foam-core with nitrile coating and silicone release for easy disassembly. Made in the USA.

€12.03 €15.57

-€10.07

JAMES GASKET Primary Gasket — Primary Cover, Part No. 25352-00-F

Top-quality primary gasket with silicone beading for improved sealing. Meets or exceeds OEM specs. Made in the USA.

€34.25 €44.32

-€8.91

JAMES GASKET Transmission Oil Pan Gasket — 5 Pack

Dependable transmission oil pan gasket engineered for a secure seal and straightforward serviceability.

€30.31 €39.22

Extreme Sealing Technology Complete Gasket Kit — '82–'85 XL, 3.425", 1.60 mm (0.063")

-€25.93

COMETIC Extreme Sealing Technology Complete Gasket Kit — '82–'85 XL,...

Complete gasket kit with MLS head gaskets, steel Viton-coated base gaskets, blue Viton valve stem seals and AFM exhaust gaskets; includes motor, primary, derby and inspection cover gaskets where applicable. Made in USA.

€88.02 €113.95

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

-€4.73

COMETIC Rocker Cover Gasket — 3.20 mm (0.125"), 10-pack

Durable rocker cover gasket engineered for reliable sealing and resistance to fuel and heat. Made in the USA.

€16.15 €20.88

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

-€0.57

COMETIC Manifold to Cylinder Head O-Rings — Intake manifold, cylinder

Sealing rings for the intake manifold-to-cylinder head interface. Meets or exceeds OEM quality; made in the U.S.A.

€1.92 €2.49

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine