Engine (6)

-€2.64

EASTERN MOTORCYCLE PARTS Oil Pump Repair Kit — EASTERN MOTORCYCLE PARTS 17-0126

Replacement components to rebuild and rebush most oil pumps. Made in the U.S.A.

€8.36 €11.00

-€4.00

EASTERN MOTORCYCLE PARTS Oil Pump Gasket/Bushing Kit — 17-0129

Complete gasket and bushing set for oil pump service. Made in the U.S.A.

€11.28 €15.28

-€11.01

EASTERN MOTORCYCLE PARTS Oil Pump Shaft/Bushing Kit — 17-0157

Replacement set for worn rotating and sleeve components; precise fit and durable construction. Made in the U.S.A.

€31.14 €42.15

-€2.53

EASTERN MOTORCYCLE PARTS Oil Pump Relief Valve Springs — 10 Pack

Direct replacement spring for Big Twin oil pumps; restores relief valve function and oil pressure control.

€7.15 €9.68

Oil Pump Relief Valve Springs — Oil pump check valve, 10 pack, A-26262-80

-€2.51

EASTERN MOTORCYCLE PARTS Oil Pump Relief Valve Springs — Oil pump check valve, 10 pack,...

Replacement spring for oil pump relief valve for Big Twin oil pumps. Restores correct pressure and valve operation.

€7.09 €9.60

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

4th Gear Countershaft Outside Retaining Washers — 5 pack

-€5.60

EASTERN MOTORCYCLE PARTS 4th Gear Countershaft Outside Retaining Washers — 5 pack

Outside retaining washer for 4th gear countershaft; precision-stamped steel for reliable fit.

€15.82 €21.42

Motor Sprocket Shaft Spacer — EASTERN MOTORCYCLE PARTS, A-24002-70

-€6.06

EASTERN MOTORCYCLE PARTS Motor Sprocket Shaft Spacer — EASTERN MOTORCYCLE PARTS,...

Precision-machined shaft spacer that ensures correct motor sprocket spacing and reliable chain alignment. Made in the U.S.A.

€17.11 €23.17

First Gear Countershaft Thrust Washers — 1.65–2.54 mm thickness, set of 4

-€2.75

EASTERN MOTORCYCLE PARTS First Gear Countershaft Thrust Washers — 1.65–2.54 mm...

Replacement OEM first gear thrust washers for reliable countershaft support and smooth shifting.

€7.17 €9.92

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

-€1.28

EASTERN MOTORCYCLE PARTS Piston Pin Clips — 10 Pack, A-22589-83A

Durable piston pin clips for a wide range of Harley models. Meets or exceeds OEM specs. Made in the USA.

€3.63 €4.91

-€2.02

EASTERN MOTORCYCLE PARTS Piston Pin Clips — 10 Pack, Piston

High-quality retaining rings that meet or exceed OEM standards. Made in the U.S.A.

€5.72 €7.74

-€9.83
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — Oversize (+0.005")

High-quality OEM cam cover bushing made in the U.S.A.

€27.81 €37.64

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56
Out of Stock

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72
Out of Stock

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€3.08
Out of Stock

EASTERN MOTORCYCLE PARTS Dowel Pins — 0.251 in × 0.496 in

Replacement dowel pins for precise alignment and reliable component positioning.

€8.73 €11.81

-€84.27
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€2.07
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Bearing Retaining Ring — 10 pack, A-11494

High-quality OEM replacement component for securing cam bearings, offering a reliable fit and durable construction.

€5.86 €7.93

-€2.57
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005", 10-pack

Essential shims for precise cam setup. Made in the USA.

€7.27 €9.84

-€2.57
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.010", 2nd gear, 10-pack

Precision shims for setting up new cams. Made in the USA.

€7.27 €9.84

-€4.70
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — Thrust, 5-pack, A-25550-90

Precision cam shims for accurate camshaft end-play adjustment. Made in the U.S.A.

€13.25 €17.95

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine