Engine (5)

Beehive Valve™ Spring Kit — Spring lift 0.640", Open pressure 285 lb, Seat pressure 83 lb

-€162.77

KIBBLEWHITE Beehive Valve™ Spring Kit — Spring lift 0.640", Open pressure...

Progressive beehive springs for improved valve control and reduced coil mass.

Includes Posi-Loc™ style retainers and heat-treated basewashers.

Made in the USA; OEM-style valve keys sold separately.

€459.65 €622.42

-€10.79

JAMES GASKET Metal Base Gaskets — Cylinder base, 0.79 mm (0.031")

Silicone-beaded base gaskets that resist brittleness, require no sealer, and are made in the USA.

€36.72 €47.51

-€15.50

JAMES GASKET Top End Gasket Kit — 0.80 mm (0.030"), 1.14 mm (0.045")

Complete set of gaskets, oil seals and O-rings for top-end engine rebuilds. Made in the USA.

€43.85 €59.35

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

-€2.86

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer oil pump O-ring for reliable, leak-free sealing. Easy to install.

€9.73 €12.59

-€4.64

JAMES GASKET Starter O-Ring — Starter housing, 25-pack

Reliable seal for starter assemblies. Made in the U.S.A.

€15.80 €20.44

Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

-€6.15

JAMES GASKET Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

Flexible MicroPore paper gasket offering high fluid resistance and reliable sealing; made in the U.S.A.

€20.91 €27.06

Replacement Cylinder Head and Compliance Fitting Gaskets — 1.14 mm, 5 pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Replacement sealing set for engine assemblies. Made in the USA. Provides reliable sealing for maintenance and repairs.

€70.27 €90.94

-€3.74

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer sealing ring for pump leak prevention. Durable elastomer construction. Sold in multi-quantity packs for maintenance needs.

€9.41 €13.15

Replacement Cylinder Head and Compliance Fitting Gaskets — Bore 3.625" , Thickness 1.14 mm (0.045"), 5-pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

High-quality replacement gaskets for cylinder head and compliance fittings, manufactured to consistent standards for dependable sealing.

€70.27 €90.94

-€16.90

JAMES GASKET Primary Gasket — Primary Cover, 1.60 mm (0.062")

Top-quality sealing with silicone beading for improved leak resistance. Made in the USA.

€57.47 €74.37

-€3.98

JAMES GASKET Shifter Shaft Seal — shifter shaft, chain cover, 10-pack

Durable replacement seal that restores smooth shifting and prevents leaks.

€13.53 €17.51

Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100", Length 4.550", Tulip Angle 23°

-€8.87

KIBBLEWHITE Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100",...

One-piece nitrided stainless-steel valve with stellite tip for superior wear resistance and reduced friction. Made in the USA.

€30.16 €39.03

-€9.73

KIBBLEWHITE Nitrided Valve — Stem 0.3095", Head 1.350", Length 4.640"

One-piece Stellite-tipped nitrided valve delivering superior wear resistance, reduced friction, and optimized flow. Made in the USA.

€33.05 €42.78

Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in length, 23° tulip

-€11.10

KIBBLEWHITE Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in...

Nitrided valve with stellite tip for reduced wear and friction; compatible with leaded and unleaded fuels. Made in USA.

€31.35 €42.45

Nitrided Valve — Standard, Head 1.750", Length 3.810", Stem 0.376"

-€6.07

KIBBLEWHITE Nitrided Valve — Standard, Head 1.750", Length 3.810", Stem...

Stellite-tipped nitrided stainless-steel valve offering superior wear resistance, lightweight profile, excellent flow, and fuel compatibility.

€23.56 €29.63

Nitrided Valve — Head diameter 1.950", Length 3.885", Stem diameter 0.3765", Intake

-€6.16

KIBBLEWHITE Nitrided Valve — Head diameter 1.950", Length...

One-piece stellite-tipped nitrided valve offering superior wear resistance, reduced friction, corrosion resistance, and excellent flow characteristics. Made in USA.

€23.92 €30.08

Nitrided Valve — Standard, Head 1.840", Stem 0.3100", Length 4.445"

-€7.63

KIBBLEWHITE Nitrided Valve — Standard, Head 1.840", Stem 0.3100", Length...

One-piece nitrided stainless-steel valve with stellite tip for reduced wear and improved flow.

Compatible with leaded and unleaded fuels; made in the USA.

€21.60 €29.23

Nitrided Valve — Head diameter 1.615", length 4.525", stem diameter 0.3096", tulip angle 29°

-€8.29

KIBBLEWHITE Nitrided Valve — Head diameter 1.615", length 4.525", stem...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction.

Lightweight profile, corrosion resistant, compatible with leaded and unleaded fuels.

€23.43 €31.72

-€12.26

KIBBLEWHITE Nitrided Valve — 1.935" head, 0.309" stem, 3.620" length

One-piece stellite-tipped nitrided valve offering improved wear resistance, corrosion resistance, and excellent flow characteristics. Compatible with leaded and unleaded fuels.

€34.74 €47.00

Cast Iron Valve Guide — Oversize (+0.001"), Inside Diameter 0.3098", Length 2.400"

-€2.29

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.001"), Inside Diameter...

Precision-machined valve guide compatible with no-lead fuel and multiple valve-stem materials. Made in the USA.

€7.77 €10.06

-€2.68

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.002"), ID 0.3098", L 2.400"

Precision valve guide compatible with unleaded fuel and all valve-stem materials. Made in the USA.

€7.60 €10.28

-€10.29

KIBBLEWHITE C630 Valve Guides — 2.40" length, 0.3095" ID

Precision-machined C630 valve guides with a tapered nose design for improved flow and OEM-style fitment. Made in the USA.

€29.15 €39.44

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

Cylinder Head/Base Gasket Kit — Standard bore, 0.51 mm (0.020 in), head and base

-€13.87

JAMES GASKET Cylinder Head/Base Gasket Kit — Standard bore, 0.51 mm (0.020...

Genuine James kit with matching head and base gaskets and O-rings where applicable. Made in the USA.

€47.16 €61.03

-€2.48
Out of Stock

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover, JGI-11293-K

-€11.86

JAMES GASKET Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover,...

Complete gasket and o-ring kit to seal four pushrod covers; includes gaskets, o-rings, chrome-plated allen bolts and washers. Made in USA.

€33.45 €45.31

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L., Oversize (+0.002")

-€2.46

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L.,...

Precision wrist pin bushing for OE-style replacement. Made in the USA. Does not include oil hole(s); must be drilled after installation.

€6.93 €9.39

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L., Oversize (+0.002")

-€2.71

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L.,...

Exact-fit wrist pin bushing made in the USA. Oil holes must be drilled after installation.

€7.69 €10.40

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company