Engine (5)

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black

Includes upper and lower tubes, clips, cups, springs and washers; O-rings/corks sold separately. One kit completes an engine.

€81.16 €109.88

-€6.33

DRAG SPECIALTIES Disc Brake Hub Mounting Kit — Rear, Chrome

Secure mounting kit with Grade 8 bolts and large-diameter button-head Torx® heads for increased load-bearing surface. Made in the U.S.A.

€17.89 €24.22

Handlebar Clamp Bolt Set — Handlebar clamp, Chrome, Silver

-€2.15

DRAG SPECIALTIES Handlebar Clamp Bolt Set — Handlebar clamp, Chrome, Silver

Made in the USA. Not for "pullback" designs. Includes precision components for secure mounting.

€6.07 €8.22

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€2.64

DRAG SPECIALTIES Timing and Oil Tank Drain Plug — socket head

Drains timing covers and some oil tanks; recessed hex head for secure fit; precision-made in the U.S.A.

€7.45 €10.09

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€76.40

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€215.92 €292.32

-€2.02

DRAG SPECIALTIES Points Cover — Chrome

Heavy-gauge replacement points cover for ignition protection and reliable performance.

€5.70 €7.72

-€3.45

DRAG SPECIALTIES Spherical Radius Points Cover — Chrome

Radiused points cover; matches brake caliper inserts and fork tube cap covers. Includes screws and gasket.

€9.75 €13.20

-€52.18

DRAG SPECIALTIES Rocker Box Kit — Chrome

Precision construction with exact dimensions; sold each (two required per motor).

€147.44 €199.62

-€77.44

DRAG SPECIALTIES Rocker Box Kit — Rocker Box cover, Chrome, 037001-BX-LB2

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€218.84 €296.28

-€20.25

DRAG SPECIALTIES Rocker Box Kit — Chrome, Top

Precision construction for a leakproof fit; sold individually — two required per motor.

€57.20 €77.45

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€42.89

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€121.22 €164.11

-€15.99

DRAG SPECIALTIES Oil Pump Parts — Gerotor Scavenge, 88721

Assorted replacement components for oil pump service and repair.

€45.19 €61.18

High Volume Oil Pump — air-cooled models only

-€32.48

DRAG SPECIALTIES High Volume Oil Pump — air-cooled models only

Increases feed and scavenge capacity for M8 fourth generation engines; fits air-cooled models only.

€91.77 €124.25

-€5.27

DRAG SPECIALTIES Swingarm Isolator Mount — Black

Vibration-isolating swingarm mount that meets or exceeds OE specifications for reliable performance and straightforward installation.

€14.90 €20.17

-€5.22

DRAG SPECIALTIES Isolator Mount — Front mounting, Black

Vibration-damping mount engineered to meet or exceed OEM specifications.

€14.76 €19.98

-€5.05

DRAG SPECIALTIES Isolator Mount — Rear, Black

Durable replacement component that reduces vibration and protects hardware. Meets or exceeds OEM specifications.

€14.27 €19.32

-€12.24

DRAG SPECIALTIES Engine Mount Stabilizer — Chrome

Reduces engine mount movement and improves stability. Includes mounting hardware for easy installation.

€34.58 €46.82

-€15.51

DRAG SPECIALTIES Engine Mount Stabilizer — Chrome, E17-0649

Reduces engine movement and vibration; includes mounting hardware for easy installation.

€43.84 €59.35

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Front, Black

High-quality replacement motor mount that meets or exceeds OEM specifications; installs using OEM hardware.

€88.86 €120.31

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Rear, Black

High-quality replacement isolator that meets or exceeds OEM specifications and installs using OEM hardware.

€88.86 €120.31

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company