Engine (5)

-€10.64

KIBBLEWHITE Valve - White Diamond — Exhaust valve, Stainless steel, Silver

High-performance valves engineered for maximum flow and long life.

€26.03 €36.67

-€6.77

KIBBLEWHITE Valve - White Diamond — Intake valve, stainless steel

Precision CNC-forged intake valve, hard-chromed and flow-tested for lightweight strength and long service life.

€19.18 €25.95

-€2.06

KIBBLEWHITE OEM Style Cast Iron Valve Guide — KIBBLEWHITE, P/N 20-4098C

OEM-style cast iron valve guide — precision-machined, compatible with no-lead fuel and most valve-stem materials. Made in the U.S.A.

€5.89 €7.95

-€2.06

KIBBLEWHITE Valve Guide — Cast Iron, KIBBLEWHITE, 20-4099C

OEM-style cast iron valve guide machined to precision tolerances. Compatible with no-lead fuel. Made in the U.S.A.

€5.89 €7.95

-€2.94

KIBBLEWHITE OEM Style Cast Iron Valve Guide — Cast iron, 20-4100C

Precision-machined cast iron valve guide compatible with no-lead fuel; restores valve-to-guide clearance. Made in the U.S.A.

€6.07 €9.01

-€2.87

KIBBLEWHITE Red Valve Seals — 4-pack

Durable valve seals made from 100% solid rubber; meet or exceed OEM specs. Sold as a set of four.

€8.10 €10.97

-€2.90

JAMES GASKET Dip Stick O-Ring — Dipstick, 10 Pack

Replacement o-ring for dip stick assemblies on Harley-Davidson motorcycles. Durable, oil-resistant seal designed for easy installation.

€9.89 €12.79

Beehive Valve™ Spring Kit — spring lift 0.640", open pressure 285 lb, seat pressure 83 lb

-€191.63

KIBBLEWHITE Beehive Valve™ Spring Kit — spring lift 0.640", open pressure...

Progressively wound springs and FEA-designed retainers for reliable valve control and durability. Uses OEM-style valve keys (sold separately).

€541.08 €732.71

-€162.77

KIBBLEWHITE Beehive Valve™ Spring Kit — Spring lift 0.640", Open pressure...

Progressive beehive springs for improved valve control and reduced coil mass.

Includes Posi-Loc™ style retainers and heat-treated basewashers.

Made in the USA; OEM-style valve keys sold separately.

€459.65 €622.42

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€10.79

JAMES GASKET Metal Base Gaskets — Cylinder base, 0.79 mm (0.031")

Silicone-beaded base gaskets that resist brittleness, require no sealer, and are made in the USA.

€36.72 €47.51

-€96.18

BURLY BRAND Brawler Kit — Front, Black

Grinds down on impact to reduce flip risk; doubles as a highway bar and comfortable footrest. Front and rear kits sold separately. Does not fit Twin-Cooled touring models.

€272.06 €368.24

-€69.11

BURLY BRAND Brawler Kit — Black, rear-mounted

Designed to grind down on impact to help prevent catching and flipping.

Also serves as a highway bar for a secure grip and comfortable footrest.

Front and rear kits sold separately; not compatible with Twin-Cooled touring models.

€195.55 €264.66

-€8.48

BURLY BRAND Brawler ST-Style Saddle Bag Adapter Kit — Rear, Black

Adapter kit for integrating the Brawler Kit with ST-style saddle bags for smooth, hassle-free installation.

€23.92 €32.40

-€15.50

JAMES GASKET Top End Gasket Kit — 0.80 mm (0.030"), 1.14 mm (0.045")

Complete set of gaskets, oil seals and O-rings for top-end engine rebuilds. Made in the USA.

€43.85 €59.35

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

-€2.86

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer oil pump O-ring for reliable, leak-free sealing. Easy to install.

€9.73 €12.59

-€4.64

JAMES GASKET Starter O-Ring — Starter housing, 25-pack

Reliable seal for starter assemblies. Made in the U.S.A.

€15.80 €20.44

Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

-€6.15

JAMES GASKET Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

Flexible MicroPore paper gasket offering high fluid resistance and reliable sealing; made in the U.S.A.

€20.91 €27.06

Replacement Cylinder Head and Compliance Fitting Gaskets — 1.14 mm, 5 pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Replacement sealing set for engine assemblies. Made in the USA. Provides reliable sealing for maintenance and repairs.

€70.27 €90.94

-€3.74

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer sealing ring for pump leak prevention. Durable elastomer construction. Sold in multi-quantity packs for maintenance needs.

€9.41 €13.15

Replacement Cylinder Head and Compliance Fitting Gaskets — Bore 3.625" , Thickness 1.14 mm (0.045"), 5-pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

High-quality replacement gaskets for cylinder head and compliance fittings, manufactured to consistent standards for dependable sealing.

€70.27 €90.94

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€16.90

JAMES GASKET Primary Gasket — Primary Cover, 1.60 mm (0.062")

Top-quality sealing with silicone beading for improved leak resistance. Made in the USA.

€57.47 €74.37

-€3.98

JAMES GASKET Shifter Shaft Seal — shifter shaft, chain cover, 10-pack

Durable replacement seal that restores smooth shifting and prevents leaks.

€13.53 €17.51

Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100", Length 4.550", Tulip Angle 23°

-€8.87

KIBBLEWHITE Nitrided Valve — Head Diameter 1.585", Stem Diameter 0.3100",...

One-piece nitrided stainless-steel valve with stellite tip for superior wear resistance and reduced friction. Made in the USA.

€30.16 €39.03

-€9.73

KIBBLEWHITE Nitrided Valve — Stem 0.3095", Head 1.350", Length 4.640"

One-piece Stellite-tipped nitrided valve delivering superior wear resistance, reduced friction, and optimized flow. Made in the USA.

€33.05 €42.78

Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in length, 23° tulip

-€11.10

KIBBLEWHITE Nitrided Valve — 1.825 in head, 0.3090 in stem, 3.562 in...

Nitrided valve with stellite tip for reduced wear and friction; compatible with leaded and unleaded fuels. Made in USA.

€31.35 €42.45

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company