Engine (5)

-€9.98

JAMES GASKET Exhaust Gaskets — James Gasket

High-quality exhaust port gaskets. Made in the USA. Available in dealer packs of 2, 5, or 10.

€30.57 €40.55

Oil Interconnect Seal — 10-pack, fits engine balancer and chain guide support

-€7.86

JAMES GASKET Oil Interconnect Seal — 10-pack, fits engine balancer and...

Precision oil interconnect designed to prevent leaks and maintain consistent oil pressure.

€24.07 €31.93

-€3.55

JAMES GASKET Speedo Gear Washer — Speedometer, 10 Pack

Precision replacement gear washer for instrument-drive assemblies that restores proper gear spacing and reliable operation.

€10.86 €14.41

-€9.89

JAMES GASKET Replacement Transmission Top Cover Gaskets — 5 Pack

Replacement gaskets for transmission top cover. Prevent leaks and restore sealing.

€30.31 €40.20

-€34.27

JAMES GASKET Gasket Kit — Complete kit

Complete and top-end gasket sets with oil seals and O-rings. Made in the USA.

€104.98 €139.25

$Replacement Cylinder Head and Compliance Fitting Gaskets — 1.14 mm (0.045\"), 10-pack$

-€31.35

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Direct-replacement gaskets for cylinder head and compliance fittings. Made in the USA.

€96.00 €127.35

-€7.25

JAMES GASKET Replacement Oil Pump Plug Washers — James Gasket, brass, 10-pack

Direct-replacement washers for oil pump plugs that restore a secure, leak-free seal.

€22.18 €29.43

-€19.76

JAMES GASKET Cylinder Head Gasket/O-Rings — 1.60 mm (0.062"), 5 pack

Top-quality cylinder head gaskets and O-rings. Made in the USA.

€60.52 €80.28

-€6.43

JAMES GASKET Cylinder Base Gaskets — 0.81 mm, 10 pack

Top-quality genuine seals, made in the USA.

€19.72 €26.15

$Replacement Rocker Box Cover Gaskets — 0.79 mm (0.031\"), 10 pack, rear$

-€6.80

JAMES GASKET Replacement Rocker Box Cover Gaskets — 0.79 mm (0.031\"), 10...

Top-quality Genuine James gaskets made in the USA. Precision-cut rocker box cover gaskets for reliable sealing.

€20.83 €27.63

Replacement Rocker Box Cover Gaskets — 0.79 mm, 10 pack

-€6.80

JAMES GASKET Replacement Rocker Box Cover Gaskets — 0.79 mm, 10 pack

Top-quality replacement gaskets for rocker box covers. Made in the USA.

€20.83 €27.63

-€10.67

JAMES GASKET Mag Plate Seal — Magneto mounting, 5-pack

Durable plate seal that prevents leaks and restores fit. Made in the U.S.A.

€32.67 €43.34

-€3.27

JAMES GASKET Replacement Washers — Shifter Shaft, 4-Speed, 10-pack

Durable replacement washers made in the U.S.A., ideal for routine maintenance.

€10.02 €13.29

-€9.98

JAMES GASKET Pushrod Seal — Clutch pushrod, 10 Pack

Reliable seal designed to prevent leaks and protect critical components.

€30.57 €40.55

-€18.66

JAMES GASKET Replacement Rocker Box Cover Gaskets — 5-pack, lower mounting

Reliable replacement rocker box cover gaskets. Made in the USA. Ideal for routine maintenance and leak prevention.

€57.16 €75.82

-€33.94

JAMES GASKET Pushrod Seal — 100 pack

Durable seal for rod interfaces; resists oil and heat.

€103.95 €137.89

-€5.70

JAMES GASKET Oil Pump Cover Gasket — Oil pump cover, 10-pack

Precision gasket for oil pump cover designed for Harley-Davidson applications.

€17.45 €23.15

-€3.14

JAMES GASKET Pushrod Seal — 25 pack

Pushrod Seal provides dependable valve-train sealing. Made in the U.S.A.

€9.61 €12.75

-€4.10

JAMES GASKET Replacement Transmission Top Cover Gaskets — 4-Speed, 10 Pack

Precision top-cover seal set engineered to reduce leaks and simplify installation. Made in the USA.

€12.56 €16.66

-€5.73

JAMES GASKET Oil Pump Body Gasket — Oil Pump, Body to Crankcase, 10 Pack

Precision-cut sealing component for engine housings; prevents leaks and ensures reliable performance. Easy to install for maintenance or rebuilds.

€17.52 €23.25

-€7.74

JAMES GASKET Oil Seal Valve Stem — Set of 8, Exhaust, Intake

Replacement oil seal with valve stem that restores sealing and reduces oil leakage.

€23.68 €31.42

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56
Out of Stock

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72
Out of Stock

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine