Engine (5)

-€37.15

S&S CYCLE Crankcase Breather Reed Valve — +0.030" thread, Silver

Reed-style breather valve that opens on demand to reduce oil carryover and simplify installation.

€144.49 €181.64

Chain Drive Cam Chest Kit — Chain, 585 Series grind, Exhaust 260°/Intake 245°

-€413.17

S&S CYCLE Chain Drive Cam Chest Kit — Chain, 585 Series grind, Exhaust...

Bolt-in S&S performance camshafts with S&S Quickie pushrods and hydraulic cam chain tensioner. Kit contains oil pump, cam support plate, camshafts, chain tensioner and tappets. Made in the USA.

€1,609.97 €2,023.14

Super Stock® Alternator Style Engine Case — 3.5" bore, fits up to 5" stroke, Black powder-coated

-€395.04

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.5" bore, fits up...

3.5" stock bore alternator-style engine case; fits up to 5" stroke. Machined for EFI and includes complete hardware kit. Made in the USA.

€1,536.27 €1,931.31

-€84.68

S&S CYCLE MR103 Cam Kit — Chain, Exhaust 252°, Intake 226°

Bolt-in cam for 103" engines; more midrange power and torque from 2500–5500 rpm. Works with stock and S&S CNC-ported heads. Professional installation required; check clearances.

€329.33 €414.01

557 Series Grind Cam Kit — Chain, Exhaust 231°, Intake 212°, Lift 0.557 in

-€91.65

S&S CYCLE 557 Series Grind Cam Kit — Chain, Exhaust 231°, Intake 212°,...

Bolt-in camshaft kit tuned for strong bottom and mid-range torque; includes complete hardware and instructions. Not recommended for compression ratios of 10.0:1 or higher.

€356.42 €448.07

-€60.43

S&S CYCLE 465 Cam Kit — Exhaust 218.9°, Intake 197.2°

Complete kit with bearings, o-rings, and hardware; bolt-in compatible with stock valve train components; increases torque and horsepower; made in USA.

€235.08 €295.51

-€92.95

S&S CYCLE 465 Cam Kit — Intake 197.2°, Exhaust 218.9°, Lift 0.462"

Complete cam kit with bearings, o-rings, and hardware. Bolt-in compatible with stock valve train, increases torque and horsepower. Made in the USA.

€361.45 €454.40

-€56.67

S&S CYCLE 475C Chain Drive Camshaft Kit — chain drive

Complete bolt-in cam kit for 107" and 114" motors.

Includes bearings, o-rings, and installation hardware.

Made in the USA. Supports 100 hp when paired with intake and exhaust.

€220.48 €277.15

-€92.95

S&S CYCLE 475G Gear Drive Camshaft Kit — Gear, Kit, Exhaust & Intake

Gear drive camshaft kit for 107"/114" motors; eliminates chain and tensioner and includes all bearings, o-rings and hardware.

€361.45 €454.40

-€56.67

S&S CYCLE 550 Camshaft Kit — 550C grind, Big Bore, Chain

Complete camshaft kit with bearings, o-rings, and hardware. Ideal horsepower cam for 114-inch and larger engines. Made in the USA.

€220.48 €277.15

-€95.01

S&S CYCLE 550 Camshaft Kit — 550G grind, big-bore

Complete 550 camshaft kit for big-bore V-twin engines. Includes bearings, o-rings, and hardware. Ideal for 114" and larger engines.

€369.49 €464.50

Pinion Shaft Key & Oil Pump Drive Key — .188" x .469" (PART# 0920-0129), .125" x .375" x .374" (PART# 0920-0130)

-€0.98

S&S CYCLE Pinion Shaft Key & Oil Pump Drive Key — .188" x .469" (PART#...

Replacement pinion and oil pump drive keys for standard bearing diameter. Sizes: .188" x .469" (PART# 0920-0129); .125" x .375" x .374" (PART# 0920-0130).

€2.39 €3.37

-€35.69

S&S CYCLE Crankcase Breather Valve — 310-0742

Stops oil carryover from Twin Cam "A" motors with stock oil pump. Easy to install during cam or oil-pump service. Not for use with Feuling pumps. Made in the USA.

€103.90 €139.59

-€4.28

S&S CYCLE Magnetic Oil Drain Plug — 1/2-20 thread

For use on S&S crankcases built after 05/01/2000. Made in the USA. Collects metallic debris to help protect the engine.

€16.89 €21.17

-€992.48

S&S CYCLE Chain Drive Cam Chest Kit — 585 Series, exhaust 260°, intake 245°

S&S bolt-in camshafts with Quickie pushrods for easier installation. Hydraulic chain tensioner improves timing and chain life. Complete kit with oil pump and tappets. Made in the USA.

€2,804.89 €3,797.37

-€312.93

S&S CYCLE Engine Case — 3.750" bore, Silver powder-coated

Replacement Twin Cam "A" engine cases for stock H-D chassis. Greater strength than stock crankcases; Timken®-style sprocket shaft bearings; O-ring sealed passages. Compatible with most stock components. Includes S&S crankcase breather reed valve. Made in the USA. Professional installation required.

€569.99 €882.92

-€1.57

S&S CYCLE Dowel Pin .430x.499 — Crankcase

Steel dowel pin, .430 x .499 in — precise replacement pin for alignment and fitment.

€6.14 €7.71

-€5.62

S&S CYCLE Crankcase Screen Oil — 5-piece kit

High-flow crankcase screen that traps debris without restricting oil pressure.

€11.10 €16.72

-€1.37

S&S CYCLE Crankcase Screen Oil — S&S Cycle, 31-2010

Pack of 5 crankcase oil screens. Durable mesh construction for reliable debris capture. Easy to install during oil changes.

€5.32 €6.69

-€549.14

S&S CYCLE MK-Series Engine Case — Black, Fits stock touring frame

Complete MK-Series crankcase assembly with stock deck height and large-volume sump. Reinforced for high-stress reliability; includes MSO and full hardware kit.

€2,139.73 €2,688.87

Crankcase MK-Series 4-1/2" — accepts up to 4.5" cylinders, 4.695" spigot bore, Black

-€577.44

S&S CYCLE Crankcase MK-Series 4-1/2" — accepts up to 4.5" cylinders,...

Ready for high-power M8 builds; accepts cylinders up to 4 1/2", with machined oil scraper, large sump and 4.695" spigot bore. No frame modifications required.

€2,250.00 €2,827.44

-€658.49

S&S CYCLE Crankcase MK-Series 4.5" — Black, 4.695" spigot bore

High-capacity engine cases for M8 platforms; accept cylinders up to 4.5", machined oil scraper, large sump, 4.695" spigot bore.

€2,565.77 €3,224.26

-€2.05

S&S CYCLE Parallel Key — 0.188" x 0.150" x 0.420", Steel

Precision individual key; dimensions 0.188" x 0.150" x 0.420"; made in the U.S.A.

€7.95 €10.00

-€77.57

S&S CYCLE Crankpin Assembly — P/N 34-2001

Includes crankpin, nuts and key. Made in the U.S.A.

€244.78 €322.35

-€9.72

S&S CYCLE Cam Installation Kit — Chain-drive

Complete set of parts for servicing or replacing gear- or chain-drive cams in Milwaukee 8 motors. Made in the USA.

€37.78 €47.50

-€35.40

S&S CYCLE Crankpin Assembly — S&S CYCLE 34-2102, Steel

Complete crankpin assembly with nuts and key. Fits stock and most aftermarket flywheels. Made in the USA.

€137.66 €173.06

-€26.52

S&S CYCLE Pinion Gear for Two-Gear Driven Cams — Undersize

Precision pinion gear for two-gear driven cam systems. A two-gear set is required; gears sold separately. Made in the U.S.A.

€103.14 €129.66

-€35.40

S&S CYCLE Crankpin Assembly — Vendor Part Number 34-2503

Direct replacement for stock and S&S flywheels. Includes crankpin, nuts and key. Made in the USA.

€137.66 €173.06

-€22.44

S&S CYCLE Pinion Gear — 1.4751"–1.4756", Orange

High-quality, precision-machined pinion gear that is heat-treated and finish ground. Made in the U.S.A.

€87.26 €109.70

-€39.72

S&S CYCLE Pinion Shaft Assembly — Silver, 33-2024

Includes shaft, nut and keys. For use with standard bearing diameter. Made in the USA.

€154.44 €194.16

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company