Engine (5)

-€2.86

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer oil pump O-ring for reliable, leak-free sealing. Easy to install.

€9.73 €12.59

-€4.64

JAMES GASKET Starter O-Ring — Starter housing, 25-pack

Reliable seal for starter assemblies. Made in the U.S.A.

€15.80 €20.44

Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

-€6.15

JAMES GASKET Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

Flexible MicroPore paper gasket offering high fluid resistance and reliable sealing; made in the U.S.A.

€20.91 €27.06

Pushrod Tappet Adjuster Locknuts — 4 Pack

-€2.61

COLONY Pushrod Tappet Adjuster Locknuts — 4 Pack

Split locknuts with 9/32"-32 thread for secure tappet adjuster retention.

Made in the USA; durable and vibration resistant.

€7.39 €10.00

-€14.73

COLONY Replacement Aluminum Pushrods — Set of 4

Aircraft-grade tubing pushrods with heat-treated steel tips; fits stock stroke lengths. Made in the USA.

€57.31 €72.04

-€17.48

COLONY Replacement Cylinder Stud Set — 8-pack

Heat-treated studs that meet or exceed original equipment standards for reliable clamping and long service life.

€67.95 €85.43

Replacement Cylinder Head and Compliance Fitting Gaskets — 1.14 mm, 5 pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Replacement sealing set for engine assemblies. Made in the USA. Provides reliable sealing for maintenance and repairs.

€70.27 €90.94

-€3.74

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer sealing ring for pump leak prevention. Durable elastomer construction. Sold in multi-quantity packs for maintenance needs.

€9.41 €13.15

-€16.93

COLONY Twin Cam Quick Install Lower Pushrod Tube Kit — 4-pack, lower

Kit that provides four short lower tubes and clips for easy access to the adjuster and lock nuts when installing adjustable pushrods on Twin Cam motors.

€65.86 €82.79

-€7.63

COLONY Pushrod Tube Kit — Chrome, set of 4, inner mount

Exact OEM-duplicate pushrod tube kits; upper, lower and inner cover kits sold separately. Made in the U.S.A.

€29.67 €37.30

Replacement Cylinder Head and Compliance Fitting Gaskets — Bore 3.625" , Thickness 1.14 mm (0.045"), 5-pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

High-quality replacement gaskets for cylinder head and compliance fittings, manufactured to consistent standards for dependable sealing.

€70.27 €90.94

-€24.44

JIMS Rocker Arm Shaft — Part 17611-66B

Durable rocker arm shaft for precise valve-train operation. Made in the U.S.A.

€95.06 €119.50

-€18.35

JIMS Rocker Arm Bushings — 8-pack

Premium American-made valve-train components for precision performance and long service life.

€71.35 €89.70

Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio, set of 4, steel

-€228.22

JIMS Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio,...

Ultra-light roller rocker arms with 660 bronze bushings and a bearing-grade roller tip. Accepts up to 0.700" lift; Twin Cam boxes may need clearance.

€887.55 €1,115.77

-€30.23

JIMS Crank Pin — 3-hole, Silver

Quality replacement that equals or exceeds OEM specifications. Made in the U.S.A.

€117.56 €147.79

-€25.75

JIMS Billet Tappet Guide — 7075-T6 aluminum

Precision-machined billet tappet guide with helical grooves for improved lubrication. Made in the U.S.A.

€100.16 €125.91

-€22.74

JIMS Motor Sprocket Shaft — JIMS, 24001-30

Precision-machined motor sprocket shaft for reliable power transfer. Made in the U.S.A.

€88.47 €111.21

-€34.23

JIMS Pinion Gear Shaft — JIMS 24006-73

Precision pinion gear shaft engineered for smooth gearbox operation. Made in the U.S.A.

€133.14 €167.37

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€47.62

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€185.22 €232.84

-€36.91

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€143.55 €180.46

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€16.90

JAMES GASKET Primary Gasket — Primary Cover, 1.60 mm (0.062")

Top-quality sealing with silicone beading for improved leak resistance. Made in the USA.

€57.47 €74.37

-€35.43

JIMS Hydrosolid Tappets — 0.8425" diameter

Performs like hydraulic to 5,500 rpm then becomes solid, adding ~3–6 hp and preventing hydraulic pump-up. Made in the U.S.A.; requires adjustable pushrods.

€137.81 €173.24

-€48.84

JIMS Hydrosolid Tappets — Diameter 0.9035"

Performs like a hydraulic tappet to 5500 rpm, then converts to a solid tappet for an additional 3 to 6 usable hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company