Engine (5)

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64
Out of Stock

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV7 Cam — 266° duration, 0.560" lift

Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — EV38 grind, Exhaust 252°, Intake 238°

Performance cam for Big Twin street and drag bikes. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV51 Cam — Intake 252°, Exhaust 256°, 0.510" lift

Broad-range EV51 camshaft for modified street motors. 3000–6500 rpm powerband, easy install, works with stock hydraulics. Made in USA. Check clearances.

€202.28 €254.30

-€18.12
Out of Stock

ANDREWS Valve Spring Upper Collars — 4-pack

Adds 0.050" more spring travel than stock. Stronger and lighter than stock. Uses stock keepers. Made in the United States.

€70.48 €88.60

-€47.82
Out of Stock

ANDREWS Adjustable Pushrod Kit — Chromoly Steel, ANDREWS

Adjustable pushrod kit for precise valve-lash setup. Rocker boxes must be removed for installation. Made in the U.S.A.

€185.98 €233.80

-€28.75
Out of Stock

ANDREWS Replacement Pushrod Kit — Aluminum, Set of 4

Fits Shovel engines using stock diameter tubing. For stock stroke applications. Made in the U.S.A.

€111.81 €140.56

-€16.85
Out of Stock

PRO-ONE PERF.MFG. Millennium Points Cover — Chrome

Custom aluminum cover with ball-milled finish. Sold individually.

€47.61 €64.46

-€18.53
Out of Stock

PRO-ONE PERF.MFG. Chrome Billet Inspection Cover — Smooth

Polished chrome billet inspection cover in ball-end milled or smooth style; includes chrome hardware. Sold each.

€52.38 €70.91

Chrome Billet Inspection Cover — Chrome, Ball-milled, with Forward Controls

-€18.53
Out of Stock

PRO-ONE PERF.MFG. Chrome Billet Inspection Cover — Chrome, Ball-milled, with...

Billet-style inspection cover with included mounting hardware. Sold individually.

€52.38 €70.91

-€48.87
Out of Stock

PRO-ONE PERF.MFG. Motor Mount — Chrome

Precision-machined motor mount with triple show-chrome plating. Includes mounting hardware; ignition/starter switch sold separately.

€138.15 €187.02

-€26.76
Out of Stock

ANDREWS Pushrod Kit — Set of 4, Fixed length

Super-light, heavy-duty fixed-length pushrods; sold as a set of four to replace OE—two intake, two exhaust. Rocker boxes must be removed for installation.

€104.06 €130.82

-€47.82
Out of Stock

ANDREWS Adjustable Pushrods — 4 Pack

Replaces nonadjustable stock rods on H-D engines for precise valvetrain control.

€185.98 €233.80

-€7.55
Out of Stock

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25
Out of Stock

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45
Out of Stock

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17
Out of Stock

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine