Engine (5)

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Transmission Side Cover Bolt Kit — Chrome

-€13.59
Out of Stock

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — Chrome

Durable hardware set for secure cover fastening. Made in the USA. Verify fitment before installation.

€52.90 €66.49

Transmission Side Cover Bolt Kit — socket-head, chrome

-€12.64
Out of Stock

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — socket-head, chrome

Complete bolt kit for transmission side cover; includes all necessary fasteners. Made in the USA.

€49.14 €61.78

-€20.07

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome, Steel

Complete bolt kit for primary and derby cover. Made in the U.S.A.

€78.08 €98.15

-€29.61
Out of Stock

GARDNER-WESTCOTT Motor Mount Kit — Chrome, Front

Durable engine support assembly made in the U.S.A., with precision components and complete hardware for secure mounting.

€115.11 €144.72

-€84.11

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver

Complete motor set with all side covers and mounts
Includes lifter base timing plug and inner primary mount
Made in the U.S.A.

€327.08 €411.19

-€72.27

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets including all side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€281.01 €353.28

-€82.78

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets with side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€321.93 €404.71

-€1.40

GARDNER-WESTCOTT Timing Cover Bolt Kit — C-20-37, Chrome

Complete bolt kit for timing cover installation. Includes necessary fasteners for a secure fit; easy to install.

€5.48 €6.88

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing

-€7.48

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Durable precision fastener for secure component mounting. Made in the U.S.A.

€29.15 €36.63

-€1.32
Out of Stock

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes

Precision-machined drain plugs that simplify fork oil changes. Made in the USA.

€5.11 €6.43

-€40.91

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Includes cam, primary, oil hose cover and transmission side cover. Made in the U.S.A.

€159.03 €199.94

-€38.76

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Complete bolt kit for side covers; includes cam, primary, oil hose cover and transmission side cover.

€150.77 €189.53

-€5.23

GARDNER-WESTCOTT Transmission Top Cover w/Sensor Mount Bolt Kit — Chrome

Hardware kit for mounting and securing a sensor on the transmission top; includes all necessary fasteners. Made in the U.S.A.

€20.35 €25.58

Belt Sprocket Bolt Kit — Belt sprocket to hub mount, Socket-head, Chrome

-€7.28
Out of Stock

GARDNER-WESTCOTT Belt Sprocket Bolt Kit — Belt sprocket to hub mount,...

Complete fastening set for securing drive components to mating assemblies. Made in the U.S.A.

€28.33 €35.61

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine