Engine (5)

Race Series® Camchest Kit — Chain, 630 Series

-€631.24

FEULING OIL PUMP CORP. Race Series® Camchest Kit — Chain, 630 Series

Complete camchest kit with high-flow components, bearings, gaskets and hardware for reliable operation and cooler engine and oil temperatures.

€1,783.97 €2,415.21

-€16.34

FEULING OIL PUMP CORP. Undersize Crankshaft Bearing Race Kit — 5206

Press-on undersize crankshaft bearing races for right and left sides, includes left-side thrust washers; enables repair and remachining after race spinning. Made in USA.

€63.57 €79.91

-€14.51

FEULING OIL PUMP CORP. Short Sump Plug — 6-pack

Prevents blockage of the scavenge pickup hole and keeps the M8 cross-sump port clear so the oil pump can pull maximum oil from the sump.

€56.42 €70.93

3-D Skull Points Cover — 0.750 in protrusion, Chrome

-€7.44

DRAG SPECIALTIES 3-D Skull Points Cover — 0.750 in protrusion, Chrome

Bold 3-D skull styling for your points cover; skull protrudes ~0.750 in for strong dimensional impact. Installs using existing mounting points.

€21.01 €28.45

Race Series® Conversion Chain Drive Camchest Kit — Chain, P/N 7225

-€478.78

FEULING OIL PUMP CORP. Race Series® Conversion Chain Drive Camchest Kit — Chain, P/N...

Converts mechanical cams and tensioners to a hydraulic tensioner system to eliminate wet sumping and reduce blowby. Lowers engine and oil temperatures; complete kit for direct installation. Does not fit '06 Dyna.

€1,861.92 €2,340.70

-€8.32

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Bold 3-D skull styling with approximately .750" projection for a standout accent.

€23.50 €31.82

HP+® Camchest Kit — 543 Series grind, Chain drive

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — 543 Series grind, Chain drive

Complete top-to-bottom upgrade kit that lowers engine and oil temperatures, raises oil pressure, eliminates wet sumping and improves smoothness and reliability; fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€8.11

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Striking 3-D skull design that protrudes about 0.750"; adds custom attitude while maintaining function.

€22.92 €31.03

Die-Cast Head Bolt Covers — 4 Pack, Chrome

-€8.02

DRAG SPECIALTIES Die-Cast Head Bolt Covers — 4 Pack, Chrome

Precision die-cast head bolt covers; includes setscrews and hex wrench for easy installation.

€22.67 €30.69

-€403.28

FEULING OIL PUMP CORP. HP+ Camchest Kit — 7252, 472 Series

Complete HP+ Camchest Kit that increases oil pressure and scavenging, reduces sump oil and temperatures, and includes pump, Reaper camshaft and all gaskets and fasteners.

€1,568.33 €1,971.61

-€9.79

DRAG SPECIALTIES Front Turn Signal Mount Kit — Chrome

Mounts handlebar bullet-style turn signals horizontally for a cleaner, low-profile look.

€27.67 €37.46

-€450.83

FEULING OIL PUMP CORP. CAM KIT 472CD RACE O/C M8

High-performance camshaft kit for M8 engines; increases lift and duration for improved throttle response. Professional installation required.

€1,753.24 €2,204.07

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

$Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1\"), Silver$

-€7.36

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1\"), Silver

Mounting kit for disc brake rotors on spoked-wheel rear hubs. Fits rotors with 3.25" bolt circle. Dual disc setups require two kits. Made in the U.S.A.

€28.63 €35.99

-€5.56

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16 thread, 25.4 mm (1")

Fits rotors with a 3.25" bolt circle; dual-disc applications require two kits; made in the U.S.A.

€21.65 €27.21

Handlebar Lever Switch Housing Master Cylinder Fastener — handlebar lever mount, master cylinder, switch housing

-€7.74

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Made in the U.S.A. Precision fastener for secure mounting of motorcycle control components.

€30.10 €37.84

-€1.60

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes, Chrome

Precision drain plugs for fork maintenance, built for durability and reliable sealing.

€6.24 €7.84

Riser Mounting Bolt Set — 2-3/4" (69.9 mm), Chrome

-€5.19

GARDNER-WESTCOTT Riser Mounting Bolt Set — 2-3/4" (69.9 mm), Chrome

Includes 1/2"-13 x 2-3/4" hex-head bolts, lock washers and cup washers. Made in the U.S.A.

€20.22 €25.41

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Silver

-€5.96

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Kits fit rotors with 3.25" bolt circle.

Dual disc applications require two kits.

Made in the U.S.A.

€23.17 €29.13

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8 in), Silver

-€4.21

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8...

Kits fit rotors with a 3.25" bolt circle. Dual disc applications require two kits. Made in the U.S.A.

€16.38 €20.59

$Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8\") length, Chrome$

-€2.82

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8\")...

Fits rotors with a 3.25" bolt circle; dual-disc applications require two kits; made in the U.S.A.

€10.99 €13.81

Primary and Derby Cover Bolt Kit — Chrome, Steel

-€18.00

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome, Steel

High-precision fasteners for cover assemblies; corrosion-resistant and precision machined.

€70.01 €88.01

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, Silver

-€5.30

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Precision fastener for handlebar lever, switch housing, and master cylinder applications. Durable and easy to install.

€20.61 €25.91

Caliper Mounting Bolt Kit — Socket-head, for front, Chrome

-€4.87

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head, for front, Chrome

Socket-head replacement kit for caliper mounting bolts and washers. Made in the USA.

€18.92 €23.79

-€11.77

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft

Single-row deep groove outer bearings built for demanding applications. Kit includes a front ball bearing and a rear roller bearing with race. Made in the USA.

€45.77 €57.54

Inner Camshaft Needle Roller Bearings — Camshaft

-€6.95

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — Camshaft

Heavy-duty inner camshaft needle roller bearings for performance engines. Manufactured by Koyo® Torrington® and made in the USA.

€27.05 €34.00

Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N 2077, pair

-€9.29

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N...

Heavy-duty full-complement needle bearings for camshafts. Manufactured by Koyo Torrington. Made in the USA.

€36.15 €45.44

HP+ Hydraulic Cam Chain Tensioner Conversion Kit — fits 1999–2006 to 2007–2017

-€289.74

FEULING OIL PUMP CORP. HP+ Hydraulic Cam Chain Tensioner Conversion Kit — fits...

Complete kit to convert early 1999–2006 mechanical spring cam chain tensioners to late 2007–2017 hydraulic systems; includes pump, lifters, chains, sprockets, hardware and rocker box gasket kit.

€1,127.05 €1,416.79

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company