Engine (5)

-€469.35
Out of Stock

S&S CYCLE Chain Drive Cam Chest Kit — 551 Series grind, Easy Start, chain

Bolt-in performance camshafts, quick-install pushrods, hydraulic chain tensioner; kit includes oil pump, cam support plate, camshafts, tensioner and tappets. Made in the USA.

€1,828.82 €2,298.17

-€10.88
Out of Stock

COMETIC Cylinder Head Gasket — 3.8125" bore, 0.76 mm thickness, MLS

High-quality cylinder head gasket engineered for long-lasting seals. Multi-layer and composite options resist heat, creep and cracking. Made in the USA.

€36.97 €47.85

-€10.88
Out of Stock

COMETIC Cylinder Head Gasket — 3.8125" bore, 1.02 mm thickness, MLS

High-quality cylinder head gasket made from fuel-resistant materials for long-term reliability. Made in the USA.

€36.97 €47.85

-€2.25
Out of Stock

COMETIC Oil Pump Gasket — 0.25 mm (0.010"), Oil Pump Body, 10-pack

High-quality, fuel-resistant oil pump gasket with AFM construction and aluminum core bonded to a nitrile rubber coating. Made in the USA.

€7.61 €9.86

-€1.23
Out of Stock

COMETIC Shifter O-Ring — 25 pack, Viton, Shifter shaft

Replacement sealing ring for shift mechanisms. Fuel-resistant and built for long-term reliability. Made in the U.S.A.

€3.47 €4.70

-€423.64
Out of Stock

S&S CYCLE Engine Case — 4.125" bore, Super Stock® T2, Wrinkle Black

Replacement Twin Cam "A" engine case for stock H-D chassis (carb and EFI). Stronger construction than stock crankcases. O-ring sealed passages and Timken®-style bearings. Includes crankcase breather reed valve. Made in the USA.

€1,647.49 €2,071.13

-€512.23
Out of Stock

S&S CYCLE Super Stock® Generator Engine Case — Generator, Natural

Complete Super Stock® generator engine case kit machined for 3.4375" cylinders; includes fittings, Timken® sprocket bearing assembly and installation instructions. Made in the USA.

€1,992.01 €2,504.24

-€2.64
Out of Stock

COMETIC Top End Gasket Kit — 4-Stroke, 1.52 mm (0.060")

Complete top-end gasket kit with base and head gaskets, cylinder O-rings and all top-end seals for a full R&R.

€7.45 €10.09

Super Stock® Alternator Style Engine Case — 3.5" bore, fits up to 5" stroke, EFI-ready, black powder-coated

-€438.33
Out of Stock

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.5" bore, fits up...

Precision-machined alternator-style engine case; front oil-filter ready, EFI-capable, includes complete hardware kit and bearings; made in USA.

€1,704.63 €2,142.96

-€411.39
Out of Stock

S&S CYCLE Engine Case — 3.750", Super Stock®, Powder-coated Wrinkle Black

Direct-replacement Twin Cam "A" engine cases for stock H-D chassis (carb and EFI). Increased strength over stock, O-ring sealed passages, and Timken-style sprocket shaft bearings. Compatible with most stock components. Requires a skilled technician for assembly.

€1,599.88 €2,011.27

-€8.89
Out of Stock

COMETIC Transmission Bearing Housing Gasket — 0.81 mm (0.032"), 10-pack

High-quality transmission bearing housing gasket with bonded aluminum-core construction and nitrile outer coating; no sealant required. Made in USA.

€25.15 €34.04

-€415.13
Out of Stock

S&S CYCLE Crankcase for Dyna — 3.937" bore, Wrinkle Black powder-coat

Stock-looking, reinforced crankcase for Dyna; ready for custom builds or T111/T124/T143 replacement. Includes pinion and Timken® bearing; MSO included.

€1,614.36 €2,029.49

Crankcase for Dyna — 4.125" bore, clearanced for 4-3/16" stroke, wrinkle black powder coat

-€419.97
Out of Stock

S&S CYCLE Crankcase for Dyna — 4.125" bore, clearanced for 4-3/16"...

Durable replacement crankcase with reinforced mounts, installed bearings and pinion, MSO included. Clearanced for big-stroke builds; requires oil supply line kit.

€1,633.25 €2,053.22

-€425.79
Out of Stock

S&S CYCLE Special Application Crankcase — Natural finish, Kit, 31-0047

High-performance crankcase for large-bore engines: accepts 4.000" bores, clearanced for up to 5.000" stroke; deck height 5.875"; machined for crank position sensor; made in USA.

€1,659.14 €2,084.93

-€524.05
Out of Stock

S&S CYCLE Engine Case — 4.125" bore, 88 A Engine, Wrinkle Black

Replacement Twin Cam "A" engine cases for stock H-D chassis (carb and EFI). Greater overall strength than stock crankcases. Timken-style sprocket shaft bearings. O-ring sealed passages. Includes S&S crankcase breather reed valve. Rear motor mount bolts to stock transmission. Made in the USA. Requires a skilled technician to verify clearances and assembly specs.

€2,037.94 €2,561.99

-€6.12
Out of Stock

COMETIC Transmission Bearing Housing Gasket — 0.81 mm (0.032"), 10 Pack

High-quality gaskets for long-term reliability. Does not require gasket sealer. Made in the USA.

€20.76 €26.88

-€19.20
Out of Stock

COMETIC Replacement Seals — Output Gear, Transmission, 10-pack, C9200

Durable replacement seals for long-term reliability. Made in the USA.

€54.32 €73.52

-€156.41
Out of Stock

S&S CYCLE Long-Block Installation Kit — Long Block, Kit

Complete long-block kit for street performance. High compression 10.8:1; forged flat-top pistons; includes Super Stock heads, crankcases and high-flow oil pump. No fuel or ignition systems included.

€608.27 €764.68

-€39.26
Out of Stock

S&S CYCLE Crankpin Assembly — 34-2003, Standard

Includes crankpin, nuts and key; fits stock and S&S flywheels. Made in the USA.

€152.72 €191.98

-€39.26
Out of Stock

S&S CYCLE Crankpin Assembly — Oversize (+0.001")

Replacement crankpin assembly — includes crankpin, nuts and key. Made in the USA.

€152.72 €191.98

-€19.71
Out of Stock

S&S CYCLE Cam Installation Kit — Gear Drive

Includes all parts required to service or change gear- or chain-drive cams in a Milwaukee 8 motor. Made in the USA.

€55.68 €75.39

-€39.26
Out of Stock

S&S CYCLE Crankpin Assembly — Oversize +0.001"

Complete crankpin kit for stock and S&S flywheels; includes crankpin, nuts and key. Made in the USA.

€152.72 €191.98

Pinion Gear for Two-Gear Driven Cams — Standard, Pinion Shaft Gear, 330-0622

-€28.04
Out of Stock

S&S CYCLE Pinion Gear for Two-Gear Driven Cams — Standard, Pinion Shaft...

Pinion gear for two-gear driven cam systems. Two-gear set required; gears sold separately. Made in the U.S.A.

€109.22 €137.26

-€52.10
Out of Stock

S&S CYCLE Pinion Gear for Two-Gear Driven Cams — Cam, outer, kit

Precision pinion for two-gear cam drives. Requires matching outer cam drive gear and mounting hardware; sold separately. Made in the U.S.A.

€202.64 €254.74

-€36.29
Out of Stock

S&S CYCLE Crankpin Assembly — S&S Cycle, 34-2602

Replacement crankpin assembly includes crankpin, nuts and key; fits stock and S&S flywheels. Made in the USA.

€141.10 €177.39

-€24.91
Out of Stock

S&S CYCLE Pinion Gear — 1.4710"-1.4715", Black

High-quality pinion gear; carefully machined, heat-treated and finish ground. Made in the U.S.A.

€96.90 €121.81

-€44.06
Out of Stock

S&S CYCLE Pinion Shaft Assembly — Silver

Includes shaft, nut and keys. Made in the USA. For use with standard bearing diameter.

€171.36 €215.42

-€371.56
Out of Stock

S&S CYCLE Flywheel Assembly — 8.5" dia, 4.25" or 4.625" stroke

High-strength forged-steel flywheel kit, assembled and balanced for stock and high-performance use. Includes flywheel, crankpin and connecting rods. '90-'99 applications require a pinion shaft conversion kit.

€1,447.75 €1,819.31

Replacement Flywheel Assembly — 4-3/8" stroke, A motor, without sprocket bearing race

-€412.46
Out of Stock

S&S CYCLE Replacement Flywheel Assembly — 4-3/8" stroke, A motor,...

S&S 3-piece flywheels, direct-fit replacement for stock crankcases. Made in U.S.A. Designed for use with Timken bearing conversion (sold separately).

€1,604.02 €2,016.48

Replacement Flywheel Assembly — A motor, 4-3/8" stroke, without sprocket bearing race

-€419.83
Out of Stock

S&S CYCLE Replacement Flywheel Assembly — A motor, 4-3/8" stroke,...

S&S three-piece flywheel assembly with integral main shafts; direct-fit to stock crankcases; sold without sprocket bearing race.

€1,632.66 €2,052.49

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine