Engine (5)

Race Series® Camchest Kit with Short Travel Lifters — Chain kit, 7262ST

-€496.47
Out of Stock

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — Chain...

High‑volume oil pump and short travel hydraulic lifters that increase oil pressure, reduce valve float and improve engine cooling. Not for '23–'24 121" VVT models.

€1,930.72 €2,427.19

Race Series® Camchest Kit with Short Travel Lifters — 508 Series grind, Kit

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — 508...

Complete high‑volume camchest kit that increases oil pressure and scavenge flow, lowers temps, and adds short travel 0.115" hydraulic lifters for improved rpm.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — 592 grind, chain

-€524.39
Out of Stock

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — 592...

High-volume oil pump and short-travel hydraulic lifters increase oil flow, reduce valve float, lower temperatures, and improve reliability.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — 521 Series grind, Twin Cooled, Chain

-€496.47

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — 521...

High‑volume billet 7075 oil pump and short travel hydraulic lifters (0.115" total travel) to reduce valve float, increase oil pressure and improve scavenge flow. Includes pump, camplate, camshaft, lifters, pushrods, bearings, hardware and gaskets.

€1,930.72 €2,427.19

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — Chain kit

High-volume Race Series® oil pump and short travel hydraulic lifters deliver increased oil pressure, improved scavenging and cooler engine and oil temperatures for M‑Eight motors. Reduces wet sumping and blowby; test results show 2 hp and 2 ft/lb gain. Complete kit with camshaft, lifters, bearings and hardware. Made in the USA. Not for '23-'24 121" VVT models.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — 592 Series grind, Exhaust 264°, Intake 234°

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — 592...

High-volume Race Series® camchest kit with short travel hydraulic lifters that increases oil pressure and scavenge flow, reduces temperatures and wet sumping; fits M-Eight Twin-Cooled and M-Eight Oil-Cooled motors (not for '23-'24 121" VVT).

€2,039.30 €2,563.69

Race Series® Camchest Kit with Full Travel Lifters — 538 Series grind, Chain

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Full Travel Lifters — 538...

Complete race-ready camchest kit with full-travel hydraulic roller lifters. Reduces engine and oil temps, increases oil pressure and eliminates wet sumping. Includes high-volume pump, billet camplate, Reaper Series® cam, lifters, fixed pushrods, bearings, ARP fasteners, gaskets and lube. Made in USA. Not for '23-'24 121" VVT motors.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — 538 Series, Chain

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — 538...

High‑volume Race Series® camchest kit with short travel hydraulic lifters; increases oil pressure and scavenge flow, reduces oil/engine temperatures; complete hardware kit included.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Full Travel Lifters — Chain, 538 Series

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Full Travel Lifters — Chain,...

Quieter, smoother engine operation with increased oil pressure and cooler running temperatures; full-travel hydraulic roller lifters and heavy-duty pushrods included.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — Chain, Kit, 538 Series

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — Chain,...

High-volume Race Series® camchest kit with short travel (0.115") hydraulic lifters. Increases oil pressure and scavenge volume, reduces wet sumping and valve float. Includes pump, camplate, camshaft, lifters, pushrods, bearings, hardware and gaskets. Made in USA. Not for '23-'24 121" VVT models.

€2,039.30 €2,563.69

HP+ Hydraulic Cam Chain Tensioner Conversion Kit — factory style camshaft

-€280.39

FEULING OIL PUMP CORP. HP+ Hydraulic Cam Chain Tensioner Conversion Kit — factory...

Converts early '99–'06 spring-tensioner cam-chain systems to the late '07–'17 hydraulic design. Includes billet oil pump, high-flow camplate, lifters, tensioner housings, chains, sprockets, bearings, gaskets and installation hardware. Rocker box gasket kit included to reuse factory one-piece pushrods. Made in USA.

€1,090.69 €1,371.08

-€102.96

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€291.05 €394.01

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€44.64

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€39.78

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine