Engine (5)

Crankcase Vent Filters — 0.500" diameter, Black, Chrome, Red

-€6.22

K & N Crankcase Vent Filters — 0.500" diameter, Black, Chrome, Red

Steel-base, one-piece crankcase vent filters. 50.8 mm (2") diameter; 38.1 mm (1½") height. Available with or without mounting stud.

€26.00 €32.22

-€3.41

S&S CYCLE Dowel Pin .430x.499 — Crankcase

Steel dowel pin, .430 x .499 in — precise replacement pin for alignment and fitment.

€4.30 €7.71

-€3.41

S&S CYCLE Crankcase Screen Oil — 5-piece kit

High-flow crankcase screen that traps debris without restricting oil pressure.

€13.31 €16.72

-€1.37

S&S CYCLE Crankcase Screen Oil — S&S Cycle, 31-2010

Pack of 5 crankcase oil screens. Durable mesh construction for reliable debris capture. Easy to install during oil changes.

€5.32 €6.69

-€549.14

S&S CYCLE MK-Series Engine Case — Black, Fits stock touring frame

Complete MK-Series crankcase assembly with stock deck height and large-volume sump. Reinforced for high-stress reliability; includes MSO and full hardware kit.

€2,139.73 €2,688.87

Crankcase MK-Series 4-1/2" — accepts up to 4.5" cylinders, 4.695" spigot bore, Black

-€577.44

S&S CYCLE Crankcase MK-Series 4-1/2" — accepts up to 4.5" cylinders,...

Ready for high-power M8 builds; accepts cylinders up to 4 1/2", with machined oil scraper, large sump and 4.695" spigot bore. No frame modifications required.

€2,250.00 €2,827.44

-€658.49

S&S CYCLE Crankcase MK-Series 4.5" — Black, 4.695" spigot bore

High-capacity engine cases for M8 platforms; accept cylinders up to 4.5", machined oil scraper, large sump, 4.695" spigot bore.

€2,565.77 €3,224.26

-€65.94

S&S CYCLE Crankpin Assembly — P/N 34-2001

Includes crankpin, nuts and key. Made in the U.S.A.

€256.41 €322.35

-€35.40

S&S CYCLE Crankpin Assembly — S&S CYCLE 34-2102, Steel

Complete crankpin assembly with nuts and key. Fits stock and most aftermarket flywheels. Made in the USA.

€137.66 €173.06

-€76.70

S&S CYCLE Crankpin Assembly — Vendor Part Number 34-2503

Direct replacement for stock and S&S flywheels. Includes crankpin, nuts and key. Made in the USA.

€96.36 €173.06

-€39.72

S&S CYCLE Pinion Shaft Assembly — Silver, 33-2024

Includes shaft, nut and keys. For use with standard bearing diameter. Made in the USA.

€154.44 €194.16

-€39.72

S&S CYCLE Pinion Shaft Assembly — 33-2027, Silver

Includes shaft, nut and keys. Made in the USA. For use with standard bearing diameter.

€154.44 €194.16

-€84.33

S&S CYCLE Sprocket Shaft Assembly — Fits S&S® SE or SL flywheels only

Includes tapered shaft, nut and keys. For use with standard diameter bearing. Fits S&S® SE or SL flywheels only. Made in the USA.

€106.06 €190.39

Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE PARTS, A-24004-03

-€30.82

EASTERN MOTORCYCLE PARTS Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE...

Left side sprocket shaft bearing kit for maintenance and rebuilds. Bearing and bearing race sold separately.

€87.10 €117.92

-€5.08

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — A-25344-99, Pinion

Precision support insert for cam support plate/cover; OEM-quality construction made in the U.S.A., designed to restore proper alignment and reduce wear.

€14.34 €19.42

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam A Engines

Precision ground press-on races; includes right and left crankshaft races with left side thrust washers. Made in the USA.

€72.06 €90.59

Crankshaft Bearing Race Kit — Twin Cam B engines

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam B engines

Precision press-on races for true outer diameter after installation.
Includes right and left crankshaft races and left-side thrust washers.
Made in the USA.

€72.06 €90.59

-€16.34

FEULING OIL PUMP CORP. Undersize Crankshaft Bearing Race Kit — 5206

Press-on undersize crankshaft bearing races for right and left sides, includes left-side thrust washers; enables repair and remachining after race spinning. Made in USA.

€63.57 €79.91

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

-€7.65

EASTERN MOTORCYCLE PARTS Flywheel Thrust Washers — +0.005" pair

Replacement-style flywheel thrust washers designed to meet or exceed OEM standards; made in the U.S.A.

€21.60 €29.25

Replacement Flywheel Assembly — 4.00" stroke, "A" motor, without sprocket bearing race

-€400.19

S&S CYCLE Replacement Flywheel Assembly — 4.00" stroke, "A" motor,...

S&S 3-piece flywheel assembly made from 4140 steel with larger 1.671" crankpin. Fits stock crankcases; designed for Timken bearing conversion (sold separately). Made in the U.S.A.

€1,559.32 €1,959.51

-€805.57

S&S CYCLE 106" Stroker Flywheel Kit — 4-1/2" stroke

Three-piece assembled flywheels; no motor case modification required. Fuel-injected motors need recalibration. Professional installation recommended.

€1,012.14 €1,817.71

-€406.69

S&S CYCLE Replacement Flywheel Assembly — A motor, 4.00" stroke

Direct-fit three-piece flywheel assembly installs in stock crankcases; made in the U.S.A.; ships without sprocket bearing race.

€1,584.66 €1,991.35

$Replacement Flywheel Assembly — 4.00\", B motor$

-€978.78

S&S CYCLE Replacement Flywheel Assembly — 4.00\", B motor

Three-piece replacement flywheel assembly; fits stock crankcases; larger 1.671" crankpin; supplied without sprocket bearing race for Timken conversion; made in the U.S.A.

€1,230.88 €2,209.66

Replacement Flywheel Assembly — 4-3/8" stroke, A motor, with sprocket bearing race

-€382.87

S&S CYCLE Replacement Flywheel Assembly — 4-3/8" stroke, A motor, with...

S&S three-piece replacement flywheel assembly; direct stock fit, made in the USA. Units without sprocket bearing race are for Timken conversion (sold separately).

€1,488.94 €1,871.81

-€399.25

S&S CYCLE Replacement Flywheel Assembly — 4-3/8" stroke, 'B' motor

S&S three-piece flywheel assembly with integral main shafts; direct fit to stock crankcases; designed for Timken bearing conversion (sprocket bearing race sold separately). Made in the U.S.A.

€1,552.63 €1,951.88

-€353.27

S&S CYCLE 106" Stroker Flywheel Kit — 4.5" stroke

Three-piece 106" stroker flywheel kit, 4.5" stroke; stock cylinders require boring to 3.875".

€1,373.85 €1,727.12

-€840.74

S&S CYCLE Flywheel Assembly — 8-1/2" diameter, 4-5/8" stroke, Steel

High-strength forged-steel flywheel assembly with keyed 6° large-diameter tapered sprocket shaft; fully assembled and balanced. Includes flywheel, crankpin, and connecting rods.

€1,057.28 €1,898.02

-€417.37

S&S CYCLE Flywheel Assembly — 107", 4-3/8"

Precision-balanced flywheel assembly for gear drive camshafts. Includes flywheel, crankpin and connecting rods. Made in the USA. Not recommended for compression ratios >10.0:1 on Tri Glide or other three-wheel models.

€1,623.11 €2,040.48

Flywheel Puller M19x1.0 for Minarelli AM6 — M19x1.0 thread, fits Minarelli AM6

-€1.41

101 OCTANE Flywheel Puller M19x1.0 for Minarelli AM6 — M19x1.0 thread,...

Compact puller with M19x1.0 thread for Minarelli AM6; ideal for alternator conversion work.

€5.48 €6.89

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company