Engine (42)

-€213.10

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series grind

Reverses rear cam rotation for increased cam lift potential and improved valve timing accuracy. Professional installation required; cam bearings and gaskets must be replaced.

€828.74 €1,041.84

-€94.15

FEULING OIL PUMP CORP. Reaper® 630 Cam — 263° exhaust, 258° intake, 39° overlap

Performance camshaft requiring supporting intake, exhaust and valvetrain upgrades.

€366.15 €460.30

-€112.20

S&S CYCLE MR103 Easy Start Camshaft Kit — S&S Cycle, Chain

Bolt-in camshaft kit for 103" engines that eases starting by temporarily reducing compression, then returns to full compression. Improves midrange power (best 2500–5500 rpm). Includes camshafts and all necessary gaskets, bearings and hardware. Installer must verify coil bind and clearances.

€436.38 €548.58

Replacement Washers — Shifter Shaft, 5-pack

-€2.27

JAMES GASKET Replacement Washers — Shifter Shaft, 5-pack

Quality hardware made to last
Made in the U.S.A.

€7.74 €10.01

635 H.O. Chain Drive Camshaft Kit — 635HO grind, Chain, Raw finish

-€86.79

S&S CYCLE 635 H.O. Chain Drive Camshaft Kit — 635HO grind, Chain, Raw...

High-lift camshaft for modified engines with 106"+ displacement and 10.0:1–11.0:1 compression.

Not a bolt-in kit; professional installation required.

Kit contains camshafts, bearings, gearcover gasket, retaining ring, o-ring, thread lock and instructions.

Installer must verify coil bind and clearances. Made in the USA.

€337.57 €424.36

Replacement Ring Set for S&S Pistons — Bore 3.500", Piston Size Standard

-€14.56

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.500", Piston...

Replacement ring set for S&S pistons; includes rings for two pistons. Made in USA.

€56.59 €71.15

Replacement Ring Set for S&S Pistons — 3.500" bore, +0.020" piston size

-€13.43
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.500" bore, +0.020"...

Replacement ring set for S&S pistons. Sold as a set for two pistons. Made in the USA.

€52.24 €65.67

Replacement Ring Set for S&S Pistons — 3.4375" bore, standard piston, domed

-€14.56

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.4375" bore, standard...

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€56.59 €71.15

-€104.59

FEULING OIL PUMP CORP. Reaper® 580 Cam — 580 Series grind, gear set

Increases horsepower and shifts the powerband higher in the rev range. High-flow intake and exhaust required; most cam compartments will need machining.

€406.75 €511.34

Replacement Ring Set for S&S Pistons — +0.060" piston size, 3.4375" bore

-€14.56

S&S CYCLE Replacement Ring Set for S&S Pistons — +0.060" piston size,...

Replacement ring set for S&S pistons. Sold as a set for two pistons. Made in the USA.

€56.59 €71.15

Replacement Ring Set for S&S Pistons — Bore 3.4375", Oversize +0.090"

-€14.81

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.4375", Oversize...

Replacement ring set for S&S pistons; includes rings for two pistons; made in the USA.

€57.68 €72.49

-€14.56

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.625", Standard, Domed

Replacement ring set for S&S pistons; includes rings for two pistons and made in the USA.

€56.59 €71.15

High-Performance Replacement Ring Set — Bore 3.875", Displacement 103 cu in

-€9.22

WISECO High-Performance Replacement Ring Set — Bore 3.875",...

Replacement ring set for one piston; verify piston compatibility before purchase.

€26.09 €35.31

High-Performance Replacement Ring Set — Bore 3.875", Oversize +0.020", Displacement 95", VM Series

-€11.86

WISECO High-Performance Replacement Ring Set — Bore 3.875", Oversize...

Replacement rings for one piston; fit only matching pistons from the same manufacturer. Sold as a set for one piston.

€33.53 €45.39

Replacement Ring Set for S&S Pistons — Bore 3.625", Piston +0.010"

-€14.56
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.625", Piston...

Replacement ring set for S&S pistons; includes rings for two pistons. Made in the USA.

€56.59 €71.15

Replacement Ring Set for S&S Pistons — Bore 3.625 in, Piston +0.030 in

-€13.10

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.625 in, Piston...

Replacement ring set for two S&S pistons. Made in the USA.

€50.97 €64.07

-€192.09

S&S CYCLE 475G Camshaft Kit — 107–135 cu in, Chrome

Bolt-in cam kit for 2200–5200 RPM performance; boosts horsepower past 100. Compatible with compression ratios up to 11.0:1. Includes bearings, o-rings, and hardware. No tuning required.

€747.05 €939.14

Replacement Ring Set for S&S Pistons — Bore 4.125 in, Piston size +0.020 in

-€19.40

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 4.125 in, Piston...

Replacement ring set for S&S pistons; sold as a set for two pistons. Made in the USA.

€75.48 €94.88

Replacement Ring Set for S&S Pistons — bore 4.125", piston +0.010"

-€19.40

S&S CYCLE Replacement Ring Set for S&S Pistons — bore 4.125", piston...

Replacement ring set for compatible pistons. Comes as a set for two pistons. Made in the USA.

€75.48 €94.88

-€62.84

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, gear, exhaust and intake

More power than 525 cams without losing low-end torque
Smooth cam lobe layout for a quiet valve train and smooth cruise power
Bolt-in for stock to mid 96" and 103" engines; works well in 88" and 96" engines
Easy starting, improved throttle response and better fuel mileage
1900–6000 RPM power range
Made in the USA

€244.35 €307.19

-€62.84

FEULING OIL PUMP CORP. Reaper® 594 Cam — 255° intake, 260° exhaust, 0.594" lift

Fierce-performing camshaft suited to a wide range of V-twin engines.

Requires supporting valvetrain, intake/exhaust and clutch upgrades.

€244.35 €307.19

-€93.94

S&S CYCLE HP103 Camshaft Kit — 249°/251° duration, 0.575" lift

Bolt-in cam kit for 103" engines; strong midrange power (3,000–6,000 rpm). Requires high-lift valve springs. Made in USA.

€365.33 €459.27

MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1 compression

-€240.61

S&S CYCLE MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1...

Bolt-in MR103 camshaft kit for 103" engines (9.7:1–10.5:1). Easier starting, full compression at speed. Includes hardware and instructions.

€935.67 €1,176.28

-€314.51
Out of Stock

S&S CYCLE MR103 Cam Kit — Intake 226°, Exhaust 252°

Bolt-in camshaft kit for 103" engines. Increases power across the rpm range, with best results from 2500–5500 rpm. Made in the USA.

€888.84 €1,203.35

Hydraulic Cam Chain Tensioner Assembly — fits '07–'17 Feuling, factory & SE camplates; conversion for early '99–'06 camshafts, o

-€16.41

FEULING OIL PUMP CORP. Hydraulic Cam Chain Tensioner Assembly — fits '07–'17 Feuling,...

Direct stock replacement for Feuling and compatible camplates, single-piston design, ARP® 12-point hardware, made in USA.

€63.82 €80.23

Hydraulic Cam Chain Tensioner Assembly — inner mount, fits '07–'17 camplates, for '99–'06 camshafts

-€16.41

FEULING OIL PUMP CORP. Hydraulic Cam Chain Tensioner Assembly — inner mount, fits...

Stock-replacement hydraulic cam chain tensioner with precision billet housing, polymer pads with PTFE, single-piston design and ARP 12-point hardware; fits '07–'17 camplates and early '99–'06 camshafts. Made in USA.

€63.82 €80.23

OE+® Hydraulic Cam Chain Tensioner Conversion Kit — fits '07–'17 Twin Cam, '06 Dyna, '99–'06 camchest

-€107.43

FEULING OIL PUMP CORP. OE+® Hydraulic Cam Chain Tensioner Conversion Kit — fits...

Replacement kit to convert or replace hydraulic cam chain tensioners on stock '07–'17 Twin Cam, '06 Dyna and '99–'06 camchest kits; includes sprockets, chains, spacers and tensioner assemblies. Made in the USA.

€417.77 €525.20

-€107.43

FEULING OIL PUMP CORP. Hydraulic Tensioner Kit — 8083

Comprehensive kit to convert early mechanical Twin Cam® cam chain tensioners to late-style hydraulic systems. Includes sprockets, alignment spacers, inner and outer cam chains, and hydraulic tensioner assemblies. Compatible with multiple camchest and oiling systems. Conversion camshafts sold separately. Made in USA.

€417.77 €525.20

-€484.68

S&S CYCLE Gear Drive Cam Chest Kit — Gear, Standard

Bolt-in gear-drive cam chest kit that improves lift and timing, replaces stock cam components, and includes S&S Quickee pushrods. Made in the USA.

€1,884.86 €2,369.54

-€27.67
Out of Stock

S&S CYCLE Replacement Rings 4" — moly-coated

Replacement piston rings for Side Winder pistons. Precision fit with a wear‑resistant coating for durable sealing.

€107.84 €135.51

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine