Engine (4)

-€12.21

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Black

Covers raw OEM bolt heads on engine, transmission and primary. Standard and deluxe kit options available; individual covers sold separately. Fasten with silicone (sold separately).

€34.50 €46.71

-€12.98

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Chrome, Silver

Covers raw OEM bolt heads on engine, transmission and primary for a clean, finished look. Deluxe and individual options available. Easy installation with included instructions.

€36.68 €49.66

-€2.22

DRAG SPECIALTIES Floorboard Mounting Kit — Driver floorboard, Silver

Includes all required hardware to mount floorboards to mount brackets; includes four shouldered bolts and four locknuts.

€6.30 €8.52

$Fork Tube Damper Mount Kit — 8 mm (5/16\"), yellow$

-€1.37

DRAG SPECIALTIES Fork Tube Damper Mount Kit — 8 mm (5/16\"), yellow

Includes two black bolts with recessed heads and two copper washers for secure attachment.

€3.88 €5.25

-€5.05

CYCLE PERFORMANCE PROD. Spark Plug Indexing Washer — Kit, Bronze

Indexes spark plug electrode gap toward intake valve
Includes five 0.40" thick, five 0.50" thick, and five 0.60" thick washers
Made in the USA

€14.68 €19.73

-€9.94

DRAG SPECIALTIES Disc Brake Hub Mounting Kit — Front, Chrome

Precision mounting kit with Grade 8 bolts and large-diameter button-head Torx® fasteners; made in the U.S.A.

€28.08 €38.02

-€14.41

DRAG SPECIALTIES Disc Brake Hub Mounting Kit — Rear, Black

Includes Grade 8 bolts with large-diameter button-head Torx® heads for increased load-bearing surface. Made in the U.S.A.

€40.74 €55.15

-€7.43

DRAG SPECIALTIES Floating Brake Rotor Hardware Kit — Rotor, Front, Silver

Includes all hardware required to mount new-style floating brake rotors; five bushings, five spring washers, and five mounting screws included.

€21.00 €28.43

-€13.60

DRAG SPECIALTIES M-Eight Bolt Kit — Black, Chrome

Complete bolt kit manufactured for reliable fit and long-lasting performance. Made in the USA.

€38.44 €52.04

-€7.50

DRAG SPECIALTIES Die-Cast Head Bolt Covers — 4-pack, Black gloss

Covers exposed head bolts for a finished look; includes setscrews and hex wrench; die-cast construction.

€21.22 €28.72

-€6.59

DRAG SPECIALTIES Head Pipe Muffler Gasket — I01-0205A

High-quality muffler gasket for a reliable seal between head pipe and muffler.

€18.61 €25.20

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

Hand Control Screw Kit — 1/4-20 x 1-1/8 in, Black, Zinc, Nickel-plated

-€8.74

DRAG SPECIALTIES Hand Control Screw Kit — 1/4-20 x 1-1/8 in, Black, Zinc,...

All hand control screws and washers in one convenient kit.

€24.72 €33.46

-€3.87

DRAG SPECIALTIES Muffler Gasket — 78677A

High-quality muffler gasket for reliable sealing and reduced exhaust leaks.

€10.93 €14.80

Crossover Pipe Gasket — DRAG SPECIALTIES 78678A

-€2.67

DRAG SPECIALTIES Crossover Pipe Gasket — DRAG SPECIALTIES 78678A

High-quality gasket for crossover pipe connections. Reliable seal and easy installation.

€7.53 €10.20

$Screw Mount Kit — 8-32, 19 mm (3/4\"), 12 Pack, Silver$

-€5.35

DRAG SPECIALTIES Screw Mount Kit — 8-32, 19 mm (3/4\"), 12 Pack, Silver

OEM replacement screw mount kit for reliable, long-lasting fastening. Easy installation and dependable performance.

€15.13 €20.48

$Screw Mount Kit — 10-24 thread, 22.2 mm (7/8\"), 5-pack, Silver$

-€1.23

DRAG SPECIALTIES Screw Mount Kit — 10-24 thread, 22.2 mm (7/8\"), 5-pack, Silver

OEM replacement screw mount kit for secure, corrosion-resistant fastening.

€3.45 €4.68

-€0.77

DRAG SPECIALTIES Rocker Shaft Seals — 4 Pack, 1966–1984 Shovelhead

Complete seal set with shims and spacers to rebuild all four rocker arm shafts on 1966–1984 Shovelhead engines. Replace with each valve job.

€2.18 €2.95

-€4.63

DRAG SPECIALTIES Rocker Arm Shaft — Front, Rear

Rocker arm shaft for Harley-Davidson models — durable construction and precision operation.

€13.09 €17.72

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black, 77334B

Complete kit with upper and lower tubes, clips, cups, springs and washers. O-rings and corks sold separately. One kit fits a complete engine.

€81.16 €109.88

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€2.64

DRAG SPECIALTIES Timing and Oil Tank Drain Plug — socket head, chrome finish

Drain plug for timing covers and select oil tank drains. Made in the U.S.A.

€7.45 €10.09

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

-€2.02

DRAG SPECIALTIES Points Cover — Chrome

Heavy-gauge replacement points cover for ignition protection and reliable performance.

€5.70 €7.72

-€3.45

DRAG SPECIALTIES Spherical Radius Points Cover — Chrome

Radiused points cover; matches brake caliper inserts and fork tube cap covers. Includes screws and gasket.

€9.75 €13.20

-€52.18

DRAG SPECIALTIES Rocker Box Kit — Chrome

Quality construction with exact dimensions for a leakproof, direct-fit rocker box. Sold each; two required per motor.

€147.44 €199.62

-€77.44

DRAG SPECIALTIES Rocker Box Kit — Rocker Box cover, Chrome, 037001-BX-LB2

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€218.84 €296.28

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company