Engine (4)

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€21.02
Out of Stock

PERFORMANCE MACHINE (PM) Scallop Points Cover — Chrome

Direct replacement timing cover with Contrast Cut™ finish; hardware and gasket included. Made in the USA.

€102.32 €123.34

-€105.85
Out of Stock

TRASK Assault Series Cam Cover — Raw, Machined

Transparent cam cover designed to match Assault series air cleaners. Made in the USA.

€411.66 €517.51

Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12 in), 57.2 mm OD (2-1/4 in), Chrome

-€94.39
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12 in),...

Complete oil cooler kit with AN #6 fittings and frame-mount clamps.

CNC-machined billet aluminum construction for precise fit.

€266.80 €361.19

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Chrome

Direct replacement for the stock unit. Includes all hardware and gasket. Machined logo and multiple finish options. Made in the U.S.A.

€439.94 €530.35

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Black

Direct replacement for stock cover
Includes all hardware and gasket
Polycarbonate lens for a unique internal view
Available in multiple finishes
Made in the U.S.A.

€439.94 €530.35

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Black Ops™

Direct replacement cam cover with Vision design and polycarbonate lens. Includes all hardware and gasket. Available in Contrast Cut™, Platinum Cut™, and Black Ops™ finishes.

€439.94 €530.35

-€120.73
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Black Ops finish

Direct replacement for stock cover. Includes all hardware and gasket. Race-inspired design improves heat dissipation. Durable two-layer gloss-over-texture finish. Made in the USA.

€341.19 €461.92

-€109.76
Out of Stock

PERFORMANCE MACHINE (PM) Race Series Cover — Black Ops, 6-speed

Precision CNC-machined component that improves heat dissipation; includes chrome hardware and gasket.

€310.18 €419.94

-€91.45
Out of Stock

PERFORMANCE MACHINE (PM) Race Series Cover — 6 Speed clutch, Black Ops

CNC-machined cover that improves heat dissipation, fits hydraulic and cable clutches, includes chrome hardware and gasket.

€258.49 €349.94

-€47.35
Out of Stock

PERFORMANCE MACHINE (PM) Race Series Derby Cover — Black Ops™, Machined

Direct replacement derby cover for OEM primaries; race-inspired design improves heat dissipation. Hardware and gasket included. Made in the USA.

€184.10 €231.45

-€65.86
Out of Stock

PERFORMANCE MACHINE (PM) Transmission Top Cover — Black Ops finish, Race Series

Precision CNC-machined replacement for the OEM transmission top cover. Easy bolt-on installation with included hardware. Race-inspired design improves heat dissipation.

€186.09 €251.95

-€176.71
Out of Stock

PERFORMANCE MACHINE (PM) Rocker Box Covers — Machined finish, Race Series

Direct replacements for OEM covers; includes all hardware and gaskets. Race-inspired design improves heat dissipation. Sold in pairs; made in the U.S.A.

€687.20 €863.91

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84
Out of Stock

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine