Engine (4)

Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

-€6.15

JAMES GASKET Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

Flexible MicroPore paper gasket offering high fluid resistance and reliable sealing; made in the U.S.A.

€20.91 €27.06

-€0.64

WISECO Replacement Circlip — 20 mm outside diameter, pair

High-strength, easy-to-install circlips forged from high-silicon alloy; designed to fit only Wiseco pistons. Sold as a pair.

€1.83 €2.47

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

Replacement Cylinder Head and Compliance Fitting Gaskets — 1.14 mm, 5 pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Replacement sealing set for engine assemblies. Made in the USA. Provides reliable sealing for maintenance and repairs.

€70.27 €90.94

-€3.74

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer sealing ring for pump leak prevention. Durable elastomer construction. Sold in multi-quantity packs for maintenance needs.

€9.41 €13.15

Replacement Cylinder Head and Compliance Fitting Gaskets — Bore 3.625" , Thickness 1.14 mm (0.045"), 5-pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

High-quality replacement gaskets for cylinder head and compliance fittings, manufactured to consistent standards for dependable sealing.

€70.27 €90.94

-€16.90

JAMES GASKET Primary Gasket — Primary Cover, 1.60 mm (0.062")

Top-quality sealing with silicone beading for improved leak resistance. Made in the USA.

€57.47 €74.37

-€3.98

JAMES GASKET Shifter Shaft Seal — shifter shaft, chain cover, 10-pack

Durable replacement seal that restores smooth shifting and prevents leaks.

€13.53 €17.51

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

Cylinder Head/Base Gasket Kit — Standard bore, 0.51 mm (0.020 in), head and base

-€13.87

JAMES GASKET Cylinder Head/Base Gasket Kit — Standard bore, 0.51 mm (0.020...

Genuine James kit with matching head and base gaskets and O-rings where applicable. Made in the USA.

€47.16 €61.03

High-Performance Piston Kit — 3.5155" piston, 4.25" stroke, 1340 cc

-€86.89

WISECO High-Performance Piston Kit — 3.5155" piston, 4.25" stroke,...

Complete top-end piston kit with forged pistons, rings, retainer clips and chrome piston pins, plus a full X‑Ring package.

€245.85 €332.74

High-Performance Piston Kit — Bore 3.508", Oversize +0.010", Stroke 3-13/16", Compression 9.5:1, 1200 cc

-€92.69

WISECO High-Performance Piston Kit — Bore 3.508", Oversize +0.010",...

Complete top-end kit with forged aluminum pistons, X-Ring package, rings, retainer clips and chrome piston pins for reliable performance.

€262.24 €354.93

High-Performance Piston Kit — Bore 3.508", Stroke 4-1/4", 1340 cc, Aluminum

-€92.69

WISECO High-Performance Piston Kit — Bore 3.508", Stroke 4-1/4", 1340...

Complete top-end piston kit with X-Ring package and all necessary installation hardware.

€262.24 €354.93

-€0.64

WISECO High-Performance Replacement Circlips — Piston

High-strength replacement circlips for piston applications. Includes rings for one piston. Forged from a high-silicone aluminum alloy for durability and dimensional consistency.

€1.83 €2.47

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€98.37

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

-€95.89

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

High-Performance Piston Kit — 3.4955 in piston diameter, 10.5:1 compression, 1200 cc displacement

-€93.31

WISECO High-Performance Piston Kit — 3.4955 in piston diameter,...

Complete top-end piston rebuild kit with X-Ring package and hardware. Made in the USA.

€264.01 €357.32

Piston Kit with Gaskets — Piston diameter 3.934", Displacement 1746 cc

-€152.67

WISECO Piston Kit with Gaskets — Piston diameter 3.934", Displacement...

Forged high-silicon aluminum pistons with Armor Plating; kit includes pistons, pins, retainer clips, top-end gasket kit and VM-Rings. Made in USA.

€431.93 €584.60

-€51.96

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine