Engine (4)

-€60.13

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€169.98 €230.11

-€46.64

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€131.76 €178.40

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€35.43

JIMS Hydrosolid Tappets — 0.8425" diameter

Performs like hydraulic to 5,500 rpm then becomes solid, adding ~3–6 hp and preventing hydraulic pump-up. Made in the U.S.A.; requires adjustable pushrods.

€137.81 €173.24

-€48.84

JIMS Hydrosolid Tappets — Diameter 0.9035"

Performs like a hydraulic tappet to 5500 rpm, then converts to a solid tappet for an additional 3 to 6 usable hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€26.20

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€101.89 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

-€31.17

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

-€9.44

JIMS Oil Pump Component — 26346-69/70

Replacement oil pump component for Big Twin models.

€36.69 €46.13

Oil Pump Component — Idler gear, 26317-68A

-€12.82

JIMS Oil Pump Component — Idler gear, 26317-68A

Replacement component for Big Twin models; precision-machined to restore lubrication performance and reduce noise.

€49.89 €62.71

-€14.02

JIMS Oil Pump Component — JIMS idler gear

Replacement component for Big Twin lubrication systems. Precision‑machined for durability and proper fit.

€54.52 €68.54

-€7.44

JIMS Gear-Side Pinion Shaft Nut — 5/8-24

High-strength pinion shaft nut designed for secure gear-side installation and long service life.

€28.92 €36.36

-€6.48

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

-€67.65

FEULING PARTS Race Series® Solid Lifters — 0.843–0.8435" diameter, oversize...

Engineered for extreme valve spring pressures and large lift cams. CNC machined rollers maintain oil flow; use with heavy-duty adjustable pushrods and a high-volume oil pump. Made in USA.

€263.59 €331.24

-€22.54

FEULING PARTS Rocker Shaft Shims — 24 pack

Tighten rocker arm end play to reduce noise and wear. Ideal side clearance 0.0035”–0.005”. Professional installation required.

€87.81 €110.35

-€22.54

FEULING PARTS Rocker Shaft Shims — 24 pack

Reduces rocker arm end play to cut noise and restore proper rocker arm oil psi. Professional installation recommended. Made in the USA.

€87.81 €110.35

-€22.54

FEULING PARTS Rocker Shaft Shims — Rocker Shaft, 24-pack

Reduces rocker arm end play and engine noise. Recommended side clearance: 0.0035" - 0.005". Helps limit wear on M8 rocker standoffs. Professional installation required. Made in the USA.

€87.81 €110.35

-€55.92

JIMS Piston Oiling Jet Kit — Silver

High-flow piston oiling jet kit designed for stock and high-performance flywheels; modified for stroker applications. Made in the U.S.A.

€217.44 €273.36

High Load Beehive® Valve Springs — 0.750" lift, kit

-€83.05

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — 0.750" lift, kit

Premium Beehive® springs for high-lift, steep-ramped cams.
Allows up to 0.750" lift; dyno proven and track tested.
Kit includes lightweight titanium retainers, chromoly seats, shims, locks and Viton® seals; made in USA.

€322.99 €406.04

-€83.05

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — 0.750" lift

High Load Beehive® valve spring kit engineered for extreme fatigue life and high-lift camshafts; allows up to 0.750" lift.

€322.99 €406.04

Viton® Valve Guide Seals — 7.00 mm stem, 4 pack

-€3.26

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 7.00 mm stem, 4 pack

High-temperature resistant seals with a spring-loaded wiper for low-friction oil control. Made in the USA.

€12.67 €15.93

Viton® Valve Guide Seals — 5/16" stem, 4-pack

-€3.26

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem, 4-pack

High-quality Viton® valve guide seals with a spring-loaded wiper for minimal friction; made in the USA.

€12.67 €15.93

-€7.71

FEULING OIL PUMP CORP. Valve Locks — Beehive, 8 Pack

Secures the valve retainer to the valve stem to prevent valve drop; precision-machined and made in the USA.

€29.95 €37.66

Econo Beehive® Valve Spring Kit — up to 0.585" lift, fits '84–'04 Big Twin, '86–'03 XL ≤0.574", '05–'17 Twin Cam ≤0.585"

-€52.00

FEULING OIL PUMP CORP. Econo Beehive® Valve Spring Kit — up to 0.585" lift, fits...

Lightweight heat-treated chromoly beehive springs; hand measured and labeled; reduces valve weight for quicker revs and smoother motion. Includes retainers, seats, shims, locks and Viton® seals. Fits cams up to 0.585" lift.

€202.24 €254.24

Viton® Valve Guide Seals — Stem Diameter 6.00 mm, 8 Pack

-€4.27

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — Stem Diameter 6.00 mm, 8 Pack

High-quality Viton® valve guide seals with spring-loaded wiper; made in the USA.

€16.64 €20.91

Viton® Valve Guide Seals — 6.00 mm, 8-pack

-€4.60

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 6.00 mm, 8-pack

High-quality valve guide seals with a spring-loaded wiper to remove excess oil; made in the USA.

€17.84 €22.44

Endurance Beehive® Valve Spring Kit — up to 0.565" lift, 226 lb @ 0.970" open height, fits 6.00 mm valve stems

-€87.93

FEULING OIL PUMP CORP. Endurance Beehive® Valve Spring Kit — up to 0.565" lift, 226...

Direct bolt‑in Endurance Beehive® valve spring kit; up to 0.565" lift, includes seals, seats, shims and locks; fits 6.00 mm valve stems.

€341.97 €429.90

Endurance Beehive® Valve Spring Kit — Chrome-Silicon, Titanium collars

-€138.55

FEULING OIL PUMP CORP. Endurance Beehive® Valve Spring Kit — Chrome-Silicon, Titanium...

Direct bolt-in Endurance Beehive® valve spring kit; up to 0.565" lift; includes springs, optional retainers, machined seats, seat shims, valve locks and Viton® seals; fits 6.00 mm valve stems.

€538.81 €677.36

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine