Engine (4)

-€1.34

DRAG SPECIALTIES Replacement Inspection Cover Gasket

Replacement inspection cover gasket kit including gasket and all mounting hardware. Machined construction for a precise fit and reliable seal.

€3.78 €5.12

-€14.31

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€40.44 €54.75

Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG SPECIALTIES, 01-0149

-€17.21

DRAG SPECIALTIES Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG...

High-quality exhaust gaskets for sealing exhaust interconnects and preventing leaks.

€48.61 €65.82

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€14.86

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€42.00 €56.86

-€53.92

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€209.67 €263.59

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€53.92

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€209.67 €263.59

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

-€14.34

DRAG SPECIALTIES Billet Flange Adapter for Spigot-Type Carbs — Aluminum

Allows mounting of OEM late-model CV or Mikuni HSR-42 carbs on early Evolution two-bolt flange manifolds. Mounting holes 2.75" on center. Can be polished, plated or painted.

€30.73 €45.07

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine