Engine (4)

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€44.64

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€39.78

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€52.02

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€52.02

ANDREWS EV7 Cam — 266° duration, 0.560" lift

Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.

€202.28 €254.30

-€52.02

ANDREWS Cam for Big Twin — EV38 grind, Exhaust 252°, Intake 238°

Performance cam for Big Twin street and drag bikes. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€202.28 €254.30

-€52.02

ANDREWS EV51 Cam — Intake 252°, Exhaust 256°, 0.510" lift

Broad-range EV51 camshaft for modified street motors. 3000–6500 rpm powerband, easy install, works with stock hydraulics. Made in USA. Check clearances.

€202.28 €254.30

-€18.12

ANDREWS Valve Spring Upper Collars — 4-pack

Adds 0.050" more spring travel than stock. Stronger and lighter than stock. Uses stock keepers. Made in the United States.

€70.48 €88.60

-€47.82

ANDREWS Adjustable Pushrod Kit — Chromoly Steel, ANDREWS

Adjustable pushrod kit for precise valve-lash setup. Rocker boxes must be removed for installation. Made in the U.S.A.

€185.98 €233.80

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine