Engine (4)

-€6.59

DRAG SPECIALTIES Head Pipe Muffler Gasket — I01-0205A

High-quality muffler gasket for a reliable seal between head pipe and muffler.

€18.61 €25.20

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

Hand Control Screw Kit — 1/4-20 x 1-1/8 in, Black, Zinc, Nickel-plated

-€8.74

DRAG SPECIALTIES Hand Control Screw Kit — 1/4-20 x 1-1/8 in, Black, Zinc,...

All hand control screws and washers in one convenient kit.

€24.72 €33.46

-€3.87

DRAG SPECIALTIES Muffler Gasket — 78677A

High-quality muffler gasket for reliable sealing and reduced exhaust leaks.

€10.93 €14.80

Crossover Pipe Gasket — DRAG SPECIALTIES 78678A

-€2.67

DRAG SPECIALTIES Crossover Pipe Gasket — DRAG SPECIALTIES 78678A

High-quality gasket for crossover pipe connections. Reliable seal and easy installation.

€7.53 €10.20

$Screw Mount Kit — 8-32, 19 mm (3/4\"), 12 Pack, Silver$

-€5.35

DRAG SPECIALTIES Screw Mount Kit — 8-32, 19 mm (3/4\"), 12 Pack, Silver

OEM replacement screw mount kit for reliable, long-lasting fastening. Easy installation and dependable performance.

€15.13 €20.48

$Screw Mount Kit — 10-24 thread, 22.2 mm (7/8\"), 5-pack, Silver$

-€1.23

DRAG SPECIALTIES Screw Mount Kit — 10-24 thread, 22.2 mm (7/8\"), 5-pack, Silver

OEM replacement screw mount kit for secure, corrosion-resistant fastening.

€3.45 €4.68

-€0.77

DRAG SPECIALTIES Rocker Shaft Seals — 4 Pack, 1966–1984 Shovelhead

Complete seal set with shims and spacers to rebuild all four rocker arm shafts on 1966–1984 Shovelhead engines. Replace with each valve job.

€2.18 €2.95

-€4.63

DRAG SPECIALTIES Rocker Arm Shaft — Front, Rear

Rocker arm shaft for Harley-Davidson models — durable construction and precision operation.

€13.09 €17.72

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black, 77334B

Complete kit with upper and lower tubes, clips, cups, springs and washers. O-rings and corks sold separately. One kit fits a complete engine.

€81.16 €109.88

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€2.64

DRAG SPECIALTIES Timing and Oil Tank Drain Plug — socket head, chrome finish

Drain plug for timing covers and select oil tank drains. Made in the U.S.A.

€7.45 €10.09

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

-€2.02

DRAG SPECIALTIES Points Cover — Chrome

Heavy-gauge replacement points cover for ignition protection and reliable performance.

€5.70 €7.72

-€3.45

DRAG SPECIALTIES Spherical Radius Points Cover — Chrome

Radiused points cover; matches brake caliper inserts and fork tube cap covers. Includes screws and gasket.

€9.75 €13.20

-€52.18

DRAG SPECIALTIES Rocker Box Kit — Chrome

Quality construction with exact dimensions for a leakproof, direct-fit rocker box. Sold each; two required per motor.

€147.44 €199.62

-€77.44

DRAG SPECIALTIES Rocker Box Kit — Rocker Box cover, Chrome, 037001-BX-LB2

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€218.84 €296.28

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€42.89

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€121.22 €164.11

-€15.99

DRAG SPECIALTIES Oil Pump Parts — Gerotor Scavenge, 88721

Assorted replacement components for oil pump service and repair.

€45.19 €61.18

High Volume Oil Pump — air-cooled models only

-€32.48

DRAG SPECIALTIES High Volume Oil Pump — air-cooled models only

Increases feed and scavenge capacity for M8 fourth generation engines; fits air-cooled models only.

€91.77 €124.25

-€13.34

DRAG SPECIALTIES Chrome Tie-Link — Chrome

Precision connector that reduces steering wobble and offers simple bolt-on installation. Supplied individually.

€37.69 €51.03

-€5.27

DRAG SPECIALTIES Swingarm Isolator Mount — Black

Vibration-isolating swingarm mount that meets or exceeds OE specifications for reliable performance and straightforward installation.

€14.90 €20.17

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company