Engine (4)

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

-€59.58

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€231.72 €291.30

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€10.58

WISECO Replacement Ring Set — Oversize +0.060", Piston 3.498"

Includes rings for one piston only. Designed to fit only matching pistons.

€29.93 €40.51

-€10.58

WISECO Replacement Ring Set — piston diameter 3.508", oversize +0.010"

Includes rings for one piston only; fits only pistons from the same manufacturer.

€29.93 €40.51

Replacement Ring Set — 3.518 in piston diameter, +0.020 in bore oversize

-€10.58

WISECO Replacement Ring Set — 3.518 in piston diameter, +0.020 in...

Includes rings for a single piston; verify piston compatibility before ordering.

€29.93 €40.51

-€0.64

WISECO Replacement Circlip — 20 mm outside diameter, pair

High-strength, easy-to-install circlips forged from high-silicon alloy; designed to fit only Wiseco pistons. Sold as a pair.

€1.83 €2.47

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

-€24.44

JIMS Rocker Arm Shaft — Part 17611-66B

Durable rocker arm shaft for precise valve-train operation. Made in the U.S.A.

€95.06 €119.50

-€18.35

JIMS Rocker Arm Bushings — 8-pack

Premium American-made valve-train components for precision performance and long service life.

€71.35 €89.70

Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio, set of 4, steel

-€228.22

JIMS Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio,...

Ultra-light roller rocker arms with 660 bronze bushings and a bearing-grade roller tip. Accepts up to 0.700" lift; Twin Cam boxes may need clearance.

€887.55 €1,115.77

-€30.23

JIMS Crank Pin — 3-hole, Silver

Quality replacement that equals or exceeds OEM specifications. Made in the U.S.A.

€117.56 €147.79

-€25.75

JIMS Billet Tappet Guide — 7075-T6 aluminum

Precision-machined billet tappet guide with helical grooves for improved lubrication. Made in the U.S.A.

€100.16 €125.91

-€22.74

JIMS Motor Sprocket Shaft — JIMS, 24001-30

Precision-machined motor sprocket shaft for reliable power transfer. Made in the U.S.A.

€88.47 €111.21

-€34.23

JIMS Pinion Gear Shaft — JIMS 24006-73

Precision pinion gear shaft engineered for smooth gearbox operation. Made in the U.S.A.

€133.14 €167.37

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€60.12

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€169.94 €230.06

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine