Engine (4)

Cam Support Plate/Cover Bushing — A-25586-37, Eastern Motorcycle Parts

-€9.21

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — A-25586-37, Eastern...

Precision support bushing for cam cover assemblies. Press-fit installation; check service manual for fitment and torque.

€26.01 €35.22

-€4.56

EASTERN MOTORCYCLE PARTS Bearing — Open end, mainshaft fit for 5-speed Big Twins

Replacement mainshaft bearing for 5-speed Big Twins.

€12.90 €17.46

-€8.14

EASTERN MOTORCYCLE PARTS Cam Needle Bearing — A-9058

High-quality cam needle bearing, better than OE replacement for smooth valve operation.

€23.00 €31.14

-€18.29

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Part No. 15-0127

Complete cam bushing kit with bushings, bearings, lock pins, and thrust plate; standard sizes for easy replacement.

€57.72 €76.01

-€7.62

EASTERN MOTORCYCLE PARTS Bearing — mainshaft fit for 5-speed Big Twin

Replacement mainshaft bearing for 5-speed Big Twins; direct-fit solution to restore proper transmission function.

€21.55 €29.17

-€14.95

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Cam kit, 15-0129

Includes cam and gear shaft bushings/bearings, lock pins, and a thrust plate. All parts are standard sizes. Made in the U.S.A.

€47.19 €62.14

-€23.28

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — 15-0131

Complete cam and gear shaft bushing kit for Big Twin engines; includes lock pins and thrust plate. Made in the U.S.A.

€65.81 €89.09

-€9.10

EASTERN MOTORCYCLE PARTS Cam Bushing — Support plate, A-25581-70

High-quality OEM cam bushing. Made in the U.S.A.

€25.70 €34.80

-€17.53

EASTERN MOTORCYCLE PARTS Left Side Sprocket Shaft Replacement Bearing — Pinion, A-24605-07

Replacement bearing for left-side sprocket shaft. Bearing and bearing race sold separately. Made in the USA.

€49.52 €67.05

-€4.47

EASTERN MOTORCYCLE PARTS Thrust Washers — 3rd Gear

Precision components that reduce friction and provide reliable axial support. Made in the U.S.A.

€14.12 €18.59

-€2.26

EASTERN MOTORCYCLE PARTS Bearing Retaining Ring — A-35113-52, 10 Pack

Durable bearing retaining ring for secure fit and reliable performance in repair and maintenance tasks.

€7.16 €9.42

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine