Engine (4)

-€50.40

ANDREWS Camshaft — M520, Exhaust 248°, Intake 228°, Lift 0.520"

Precision-engineered camshaft, made in the U.S.A., for durable, smooth power delivery.

€196.40 €246.80

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

-€14.31

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€40.44 €54.75

Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG SPECIALTIES, 01-0149

-€17.21

DRAG SPECIALTIES Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG...

High-quality exhaust gaskets for sealing exhaust interconnects and preventing leaks.

€48.61 €65.82

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€14.86

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€42.00 €56.86

-€50.40

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€196.40 €246.80

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€50.40

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 €246.80

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, Silver, 10 Pack

-€4.00

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line,...

Stepless® ear clamps for fuel lines — 5 mm band, 360° stepless inner surface, tamper-evident, lightweight.

€11.31 €15.31

Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10 pack, silver

-€3.98

MOTION PRO Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10...

Stepless® ear clamps deliver a 360° gap-free seal with a narrow 5 mm band. Specially formed edges reduce damage and tampering is visible. Lightweight design. Side jaw clamp tool sold separately.

€11.26 €15.24

Stepless® Ear Clamps for Fuel System — 5/16" ID, 1/4" ID, 10 Pack, Silver

-€3.42

MOTION PRO Stepless® Ear Clamps for Fuel System — 5/16" ID, 1/4" ID, 10...

Stepless® ear clamps provide gap-free 360° sealing with a narrow 5 mm band to concentrate compression. Tamper-evident and lightweight. Side jaw tool sold separately (part# 3801-0182).

€9.65 €13.07

Stepless® Ear Clamps for Fuel System — 3/8" ID fuel line, silver raw

-€3.96

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/8" ID fuel line,...

Stepless® ear clamps designed for fuel systems. 360° stepless inner surface, narrow 5 mm band for concentrated seal compression, tamper-evident. Tool sold separately.

€11.19 €15.15

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine