Engine (4)

-€2.54

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005 in, 10-pack

Precision cam shims for accurate cam setup; made in the USA.

€7.17 €9.71

$Cam Shims — 0.015\", 10 pack, 1st/3rd/4th gear$

-€2.54

EASTERN MOTORCYCLE PARTS Cam Shims — 0.015\", 10 pack, 1st/3rd/4th gear

Precision shims for cam setup. A must when setting up new cams. Made in the USA.

€7.17 €9.71

Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8 Pack, breather valve

-€8.37

EASTERN MOTORCYCLE PARTS Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8...

Set of washers for breather valves. Use only with plastic breather valves; do not mix plastic and steel parts. Made in the U.S.A.

€23.66 €32.03

-€9.21

EASTERN MOTORCYCLE PARTS Cam Shims — 0.050"–0.095", 10-pack

Precision shims for accurate valve adjustment. Made in the U.S.A.

€26.01 €35.22

-€6.09

EASTERN MOTORCYCLE PARTS Bearing — 5-speed Big Twin fitment, open end

Replacement mainshaft bearing for 5-speed Big Twins; restores smooth shifting and reduces transmission play.

€17.23 €23.32

-€9.21

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — Standard, A-25586-37

Precision cam cover bushing for reliable valve-train alignment. High-quality OEM components made in the USA.

€26.01 €35.22

-€4.56

EASTERN MOTORCYCLE PARTS Bearing — Open end, mainshaft fit for 5-speed Big Twins

Replacement mainshaft bearing for 5-speed Big Twins.

€12.90 €17.46

-€8.14

EASTERN MOTORCYCLE PARTS Cam Needle Bearing — A-9058

High-quality cam needle bearing, better than OE replacement for smooth valve operation.

€23.00 €31.14

-€18.29

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Part No. 15-0127

Complete cam bushing kit with bushings, bearings, lock pins, and thrust plate; standard sizes for easy replacement.

€57.72 €76.01

-€7.62

EASTERN MOTORCYCLE PARTS Bearing — mainshaft fit for 5-speed Big Twin

Replacement mainshaft bearing for 5-speed Big Twins; direct-fit solution to restore proper transmission function.

€21.55 €29.17

-€14.95

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Cam kit, 15-0129

Includes cam and gear shaft bushings/bearings, lock pins, and a thrust plate. All parts are standard sizes. Made in the U.S.A.

€47.19 €62.14

-€23.28

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — 15-0131

Complete kit with cam and gear shaft bushings, bearings, lock pins, and shims. Made in the U.S.A.

€65.81 €89.09

-€9.10

EASTERN MOTORCYCLE PARTS Cam Bushing — Standard, Cam Cover

Precision cam bushing that reduces wear and ensures smooth camshaft operation. High-quality OEM components; made in the USA.

€25.70 €34.80

-€17.53

EASTERN MOTORCYCLE PARTS Left Side Sprocket Shaft Replacement Bearing — Pinion, A-24605-07

Replacement bearing for left-side sprocket shaft. Bearing and bearing race sold separately. Made in the USA.

€49.52 €67.05

-€4.47

EASTERN MOTORCYCLE PARTS Thrust Washers — 3rd Gear

Precision components that reduce friction and provide reliable axial support. Made in the U.S.A.

€14.12 €18.59

-€2.26

EASTERN MOTORCYCLE PARTS Retaining Ring — Main shaft rollers, 4-speed, 10-pack, Silver

High-quality OEM replacement components for reliable shaft retention. Durable and precise.

€7.16 €9.42

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine