Engine (4)

Bearing Roller Set — Connecting rod, outside diameter standard

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing Roller Set — Connecting rod, outside diameter standard

Includes short and long rollers; sold as a set. Made in the USA.

€14.70 €19.91

Bearing Roller Set — Connecting rod, Oversize (+0.0004") outside diameter

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing Roller Set — Connecting rod, Oversize (+0.0004")...

Includes short and long rollers. Sold in sets. Made in the USA.

€14.70 €19.91

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing Roller Set — Connecting rod, Oversize (+0.001")

Includes short and long rollers; sold in sets. Made in the USA.

€14.70 €19.91

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing Roller Set — Oversize (+0.002"), Connecting rod

Includes short and long rollers. Sold in sets. Made in the USA.

€14.70 €19.91

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€2.60
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.007", 10 pack

Precision shims for accurate cam end play setup. A must when setting up new cams. Made in the USA.

€7.35 €9.95

-€9.32
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — A-25581-36

Precision-machined bushing for cam cover applications. Durable, low-friction design. Made in the U.S.A.

€26.35 €35.67

$Cam Shims — 0.050\", 5 Pack$

-€4.69
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.050\", 5 Pack

Precision cam shims for accurate valve clearance and cam alignment. Made in the U.S.A.

€13.30 €17.99

-€11.47
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing — 5-speed Big Twins, open end, 4-pack

Replacement mainshaft bearing for 5-speed Big Twins; precision fit and durable construction.

€32.43 €43.90

-€4.69
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.075", 5 Pack

Precision shims for adjusting camshaft position and valve timing. Made in the U.S.A.

€13.30 €17.99

$Cam Shims — 0.080\" 5 pack$

-€4.69
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.080\" 5 pack

High-precision shims for accurate clearance adjustment. Made in the U.S.A.

€13.30 €17.99

-€9.39
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing — Closed end

Replacement mainshaft bearing for 5-speed Big Twins.

€26.52 €35.91

-€7.30
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing — Open End

Replacement mainshaft bearing for 5-speed Big Twins.

€20.60 €27.90

-€6.24
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing — mainshaft replacement for 5-speed Big Twins

Replacement mainshaft bearing for 5-speed Big Twins. Precision fit for reliable shifting and reduced end play.

€17.66 €23.90

-€13.05
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing — mainshaft bearing for 5-speed Big Twins, open end

Replacement mainshaft bearing for 5-speed Big Twins.

€36.86 €49.91

Idler Gear & Circuit Breaker Bushings — Pair

-€5.71
Out of Stock

EASTERN MOTORCYCLE PARTS Idler Gear & Circuit Breaker Bushings — Pair

Precision idler gear and circuit breaker bushings engineered for reliable alignment and reduced wear.

€16.17 €21.88

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Bearing — Closed End

Replacement mainshaft bearing for 5-speed Big Twins.

€14.70 €19.91

-€2.59
Out of Stock

EASTERN MOTORCYCLE PARTS Retaining Ring — 10 pack

Durable stamped retaining ring for reliable axial retention. Made in the U.S.A.

€7.33 €9.92

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine