Engine (4)

-€3.97

JAMES GASKET Oil Pump O-Ring — 10 Pack

Replacement outer oil pump O-ring that restores the pump housing seal.

€13.50 €17.47

-€37.12
Out of Stock

JIMS Motor Sprocket Shaft — JIMS, 24001-56

Precision motor sprocket shaft designed for reliable power transfer and long service life. Made in the U.S.A.

€144.38 €181.50

-€37.40
Out of Stock

JIMS Right-Side Crankcase Bushing — Standard Size, 24599-40

Precision right-side crankcase bushing with 360° oiling and U.S.-made construction.

€145.42 €182.82

-€39.47

JIMS Pinion Gear Shaft — JIMS, 24006-54A

Precision pinion gear shaft, made in the U.S.A., designed for reliable drivetrain performance.

€153.55 €193.02

-€45.01

JIMS Pinion Gear Shaft — JIMS, 24007-39

Precision replacement shaft made in the U.S.A.; heat-treated and precision ground for long life. Inspect bearings and seals during installation.

€175.03 €220.04

-€40.26

JIMS Motor Sprocket Shaft — 23909-80, Steel

All ground diameters concentric to within .0003" for easier flywheel trueing and rebuilding. Manufactured from domestic materials. Made in the USA.

€156.57 €196.83

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

-€3.09

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€8.55

JAMES GASKET Oil Pump Shaft Key — 10-pack

Precision replacement shaft key for oil pump. Made in the U.S.A.

€29.02 €37.57

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€16.90

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€47.73 €64.63

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€3.89

JAMES GASKET 5th Gear O-Ring & Seal — Main drive gear, oil seal

O-ring and seal for reliable leak prevention. Durable molded construction. Made in the U.S.A.

€13.22 €17.11

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94
Out of Stock

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€7.55

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25
Out of Stock

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

-€3.93
Out of Stock

JIMS Cam Cover O-Ring — Large, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€15.31 €19.24

-€1.27

JIMS Cam Cover O-Ring — Small, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€4.97 €6.24

-€4.26

JAMES GASKET Oil Pump Gasket Kit — JGI-36-FLH

Complete gasket kit for oil pump service. Made in the U.S.A.

€14.49 €18.75

Primary to Transmission Gasket — 0.8 mm thickness, 10 Pack

-€27.10

JAMES GASKET Primary to Transmission Gasket — 0.8 mm thickness, 10 Pack

Flexible MicroPore paper gaskets deliver high fluid resistance, reliable sealability across flange conditions, and heat tolerance above 500 degrees. Made in the U.S.A.

€37.38 €64.48

-€5.30

BARNETT Scorpion Derby Cover Gasket — 646-30-51090

Replacement gasket for Big Twin Scorpion Derby Cover. Ensures a tight seal to prevent oil leaks during service and operation.

€14.94 €20.24

-€10.73
New

JAMES GASKET JAMES GASKET CAM GR CVR GSKT 36-40 EL

CAM GR CVR GSKT 36-40 EL

€30.38 €41.11

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company