Engine (4)

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

Out of Stock

ANDREWS PB+ Cams

Upgrade to PB+ Cams for enhanced horsepower and torque in your Harley-Davidson. This easy bolt-in set requires no headwork, suitable for stock springs up to 7000 rpm.

€474.45

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

Piston Kit for S&S Motors — 3.875" bore, +0.005" oversize, 103 cu in

-€111.18

S&S CYCLE Piston Kit for S&S Motors — 3.875" bore, +0.005" oversize, 103...

Complete piston kit with pistons, rings, wrist pins and clips for S&S Motors. Made in the U.S.A.

€432.34 €543.52

Piston Kit for S&S Motors — Bore 3.875", Displacement 103", Oversize +0.010"

-€111.18
Out of Stock

S&S CYCLE Piston Kit for S&S Motors — Bore 3.875", Displacement 103",...

Complete piston kit with forged pistons, rings, wrist pins and clips. Made in the U.S.A.

€432.34 €543.52

-€94.15

FEULING OIL PUMP CORP. Reaper® Camshaft Chain Drive Conversion — 574 Series, Pair

Bolt-in chain conversion for stock 103" and 110" engines; broad power band for modified big-bore engines. Recommended 2000–6800 rpm.

€366.15 €460.30

$Piston Kit for S&S Motors — Bore 3.500\", Oversize +0.020\", Displacement 80\"$

-€34.97

S&S CYCLE Piston Kit for S&S Motors — Bore 3.500\", Oversize +0.020\",...

Complete piston kit with rings, wrist pins and clips for full motor replacement.

Made in the U.S.A.

€135.99 €170.96

-€112.20

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€2.41

S&S CYCLE Wrist Pin Circlips — 0.927 in, 4-pack

Precision circlips for 0.927 in wristpins. Made in the U.S.A.

€9.39 €11.80

-€23.88

FEULING OIL PUMP CORP. Camshaft Installation Kit — Standard model, chain conversion kit

Complete camshaft service package with roller bearings, ARP® bolts, gasket set and o-rings. Made in the USA.

€92.88 €116.76

Piston Kit — Bore 3.875", Compression Ratio 10.5:1, Displacement 95 cu in

-€91.64

JE PISTONS Piston Kit — Bore 3.875", Compression Ratio 10.5:1,...

Forged 2618-T6 aluminum piston kit with dome/dish crown; pins, locks and rings included.

€259.30 €350.94

-€29.14

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Chain conversion

Comprehensive camshaft and top-end installation kit including gasket kits, roller bearings, hardware and O-rings. Made in the USA.

€113.32 €142.46

-€91.64

JE PISTONS Piston Kit — Bore 3.937", 1595 cc, 9.5:1

High-strength 2618-T6 forged aluminum piston kit engineered for competition; includes pins, locks and rings.

€259.31 €350.95

-€128.49

JE PISTONS Piston Kit — 3.937" bore, 10.5:1 compression, 98" displacement

High-strength forged piston kit for competition and extreme applications; complete with pins and rings.

€363.56 €492.05

-€87.64

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series grind

Bolt‑in cam that increases power and throttle response while preserving smooth low‑end torque.

€340.80 €428.44

Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255° intake, 0.604" lift

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255°...

Fierce-performing camshaft for 103", 110" and 124" engines; boosts torque and horsepower across wide RPM ranges. Made in the USA.

€366.15 €460.30

-€94.15

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°, Pair

Broad, smooth power band with strong low-end torque.

Bolt-in fit for many 88", 96" and 103" engines.

Improves throttle response and fuel mileage; recommended upgrades for some model years.

€366.15 €460.30

Replacement Piston — 3.755" bore, +0.005" oversize, 4-3/8" stroke, kit

-€25.84

DRAG SPECIALTIES Replacement Piston — 3.755" bore, +0.005" oversize, 4-3/8"...

OEM-quality replacement piston kit with two pistons, wrist pins and clips; accepts OEM or Hastings rings (sold separately).

€73.06 €98.90

Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°, Intake lift 0.594", Exhaust lift 0.604"

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°,...

Fierce-performing camshaft for large and small displacements, offering strong torque and horsepower gains; requires complementary performance upgrades. Made in the USA.

€366.15 €460.30

Reaper® 594 Cam — 594 series, Intake 255° 0.594" lift, Exhaust 260° 0.604" lift

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 series, Intake 255° 0.594" lift, Exhaust...

Fierce-performing camshaft for large and small displacements.
Improves torque band and horsepower across midrange and top end.
Requires supporting high-performance valve train and fuel/air upgrades.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Exhaust 260°, Intake 255°, Exhaust lift 0.604"/Intake lift 0.594"

-€87.64

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Exhaust 260°, Intake 255°,...

High-performance cam for 95"–124" engines; requires valvetrain, intake and exhaust upgrades.

€340.80 €428.44

HP+® Camchest Kit — Chain drive, 543 Series grind, intake & exhaust

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, 543 Series grind, intake &...

Complete camchest rebuild kit for '99–'06 Twin Cam (except '06 Dyna). Includes all components for cooler temps, higher oil pressure and quieter operation.

€1,636.28 €2,057.04

Replacement Piston — 3.875" bore, +0.010" oversize, 4-3/8" stroke, kit

-€28.20
Out of Stock

DRAG SPECIALTIES Replacement Piston — 3.875" bore, +0.010" oversize, 4-3/8"...

OEM-quality cast aluminum replacement pistons; kits include two pistons, wrist pins and clips.

€79.68 €107.88

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — For '99-'06 Twin Cam, gear drive

Complete camchest rebuild kit for '99-'06 Twin Cam (except '06 Dyna). Increases oil pressure and flow, lowers engine and oil temps, reduces blow-by, and includes all bearings, gaskets and hardware for installation.

€1,636.28 €2,057.04

-€30.11

DRAG SPECIALTIES Piston — 3.750" bore, 9.0:1 compression, kit

OEM-quality replacement pistons for Twin Cam motors; includes two pistons, wrist pins and clips; accepts OEM or Hastings rings.

€85.13 €115.24

HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

Complete camchest rebuild kit that improves oil flow, raises oil pressure, reduces engine and oil temperatures, and smooths operation. Fits '07–'17 Twin Cam and '06 Dyna.

€1,636.28 €2,057.04

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine