Engine (4)

Shouldered Cast Iron Valve Guide — 0.3098" ID, 2.100" L, Oversize (+0.003")

-€2.60
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3098" ID, 2.100" L,...

Shouldered valve guide, precision-machined for reliable fit and long service life. Made in the U.S.A.

€7.38 €9.98

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID 0.3098"

-€2.41
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID 0.3098"

Precision-machined cast iron valve guide that accepts valve-stem materials and special seals (sold separately). Made in the U.S.A.

€7.20 €9.61

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€2.41
Out of Stock

KIBBLEWHITE Cast Iron Valve Guide — 0.3098" ID, 2.400" L, Oversize +0.003"

Precision-machined cast iron valve guide compatible with no-lead fuel. Built for long service life and reliability; made in the USA.

€7.20 €9.61

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€2.74
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.855" length

Precision-machined cast iron valve guide for exhaust applications. Accepts special seals (sold separately). Made in the U.S.A.

€7.80 €10.54

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78
Out of Stock

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), 0.3745" ID, 1.910" L

-€2.74
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), 0.3745"...

Precision-machined shouldered valve guide compatible with unleaded fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.80 €10.54

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745" ID

-€2.60
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745" ID

Precision-machined cast iron valve guide compatible with lead-free fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.38 €9.98

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745" ID, 1.855" L

-€2.60
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745"...

Precision-machined shouldered valve guide. Compatible with no-lead fuel; accepts any valve-stem material and special seals (sold separately). Made in the U.S.A.

€7.38 €9.98

Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID 0.3745"

-€2.74
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID 0.3745"

Precision-machined cast iron valve guide for exhaust applications. Compatible with no-lead fuel and all valve-stem materials. Accepts special seals (sold separately). Made in the U.S.A.

€7.80 €10.54

Shouldered Cast Iron Valve Guide — Oversize (+0.004"), 0.3745" ID, 1.910" L

-€2.88
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.004"), 0.3745"...

Precision-machined shouldered valve guide for reliable performance. Accepts valve guide seals (sold separately). Made in the U.S.A.

€8.13 €11.01

Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.910" length, special shouldered

-€2.68
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.910" length,...

Precision-machined cast iron valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.60 €10.28

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64
Out of Stock

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€2.60
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), 0.3745"...

Precision-machined cast iron valve guide for intake use. Compatible with no-lead fuel and multiple valve-stem materials. Accepts special seals (sold separately). Made in the U.S.A.

€7.38 €9.98

-€4.39
Out of Stock

COMETIC Cylinder Head Gasket — Cylinder head, 0.81 mm (0.032")

Durable cylinder head gasket engineered for reliable sealing and long service life.

€12.47 €16.86

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745" ID, 1.910" L

-€2.74
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745"...

Precision-machined cast iron valve guide; compatible with no-lead fuel and accepts special seals (sold separately). Made in the U.S.A.

€7.80 €10.54

-€44.64
Out of Stock

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€2.79
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.910" L

Precision-machined shouldered valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.89 €10.68

-€2.60
Out of Stock

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.855" L

Precision‑machined cast iron valve guide that accepts any valve‑stem material and special seals (sold separately). Made in the U.S.A.

€7.38 €9.98

-€39.78
Out of Stock

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

C630 Valve Guides — Oversize (+0.003"), 2.400" length

-€10.14
Out of Stock

KIBBLEWHITE C630 Valve Guides — Oversize (+0.003"), 2.400" length

Precision-machined C63000 bronze valve guides with tapered nose for improved flow; accept OEM top-hat seals and lower collar. 2.40" overall length. Made in USA.

€28.69 €38.83

-€10.14
Out of Stock

KIBBLEWHITE C630 Valve Guides — Oversize (+0.004"), 2.40" length

Precision-machined C630 valve guides with tapered nose for improved flow; OEM-style fit, accepts top-hat seals (sold separately); made in USA.

€28.69 €38.83

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€10.85
Out of Stock

KIBBLEWHITE Valve Keeper Keys — 15°, 0.375" stem, 4 Pairs

Precision-machined valve keeper keys engineered for consistent valve retention and long-term durability. Made in the USA.

€30.67 €41.52

-€52.02
Out of Stock

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€1.15
Out of Stock

COMETIC Intake Manifold Seal — cylinder head, intake manifold fitment

Durable seal for reliable long-term sealing in the engine intake system. Made in the USA.

€3.25 €4.40

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine