Engine (4)

-€2.26

COLONY Carburetor Support Bracket — Linkert carburetor, Black, Silver

Exact reproduction of original Harley-Davidson® support brackets. Supports Linkert carburetors. Made in the USA.

€6.41 €8.67

-€3.44

COLONY Carburetor Bowl Lock Nut Kit — carburetor, cadmium plated

Includes a copper gasket, nut and lock washer. Made in the United States.

€13.36 €16.80

-€5.50

COLONY Dash Plate Mounting Kit — Silver, Dash Plate

Includes all necessary hardware to properly install dash plate and cover. Made in the U.S.A.

€21.38 €26.88

-€5.80

COLONY Dash Cover Mounting Screw and Stud Kit — Chrome

Complete set of fastening components: center fastener with washer, base fastening piece, lockwasher and locknut. Center fastener omits a choke cable hole. Made in the U.S.A.

€22.52 €28.32

-€3.50

COLONY Tool Box Mounting Kit — Cadmium plated

Complete mounting kit with all stock fasteners included. Made in the U.S.A.; easy bolt-on installation.

€9.86 €13.36

-€6.40

COLONY Saddlebag Mounting Kit — Cadmium plated

Complete kit with studs and acorn nuts to install saddlebag mounting plates. Made in the U.S.A.; fits Harley-Davidson® '48-'57 Panhead models.

€24.85 €31.25

-€1.43

COLONY Jiffy Stand Pin and Screw Kit — Silver

Replaces jiffy stand pin and screw. Made in the U.S.A.

€5.57 €7.00

-€3.88

COLONY Rear Stand Mounting Hardware — Kit, cadmium plated

Precision reproductions of the original rear-stand fasteners. Made in the U.S.A.

€15.07 €18.95

Front Brake Cable Adjuster — Front Brake Cable, Silver

-€4.59

COLONY Front Brake Cable Adjuster — Front Brake Cable, Silver

Exact duplicate of the original front brake cable adjuster. Made in the U.S.A.

€12.99 €17.58

-€2.67

COLONY Shifter Rod End Bolt Kit — Shifter, Silver

Tightens sloppy shifter assemblies with the supplied washer for firmer shifting.

Made in the U.S.A.; quick and simple to install.

€7.52 €10.19

-€3.20

COLONY Clutch Cable Adjusting Sleeve — chrome finish

Original reproduction adjusting sleeve for reliable clutch cable adjustment.

€12.50 €15.70

Clutch and Brake Lever Pivot Screw Kit — Shoulder (Pivot), Cadmium plated

-€2.67

COLONY Clutch and Brake Lever Pivot Screw Kit — Shoulder (Pivot),...

Reproduction pivot screws and nuts for clutch and brake levers. Made in the U.S.A.

€7.55 €10.22

-€1.29

COLONY Seat Post Rod Locknut — Cadmium plated, hex, kit

Locknut and lockwasher for seat post rod; made in the U.S.A.

€5.03 €6.32

-€8.32

COLONY Seat Bar Bushing Set — Seat bar, cadmium plated

Precision-machined for consistent fit
Includes mounting hardware
Made in the U.S.A.

€32.35 €40.67

Seat Bar Bushing Set — Cadmium plated, Kit, 8876-5

-€8.32

COLONY Seat Bar Bushing Set — Cadmium plated, Kit, 8876-5

Precision-machined bushings with heat treatment and grinding; includes all mounting hardware; made in the U.S.A.

€32.35 €40.67

-€7.87

COLONY Saddle to Tee Mounting Kit — Seat Bar, Cadmium plated

Reproduction of studs, nuts, seat height adjustment spacers, round head bolt and tapered washers to mount the seat to the tee. Made in the U.S.A.

€30.60 €38.47

-€7.28

COLONY Seat Post Bushing — P/N 7708-1

Made in the U.S.A. Durable seat post bushing for reliable fit and reduced wear.

€20.57 €27.85

-€3.21

COLONY Foot Clutch Bracket Bushings — Foot lever, bronze

Reproduction of original bushings; made in the U.S.A.

€9.07 €12.28

-€9.36

COLONY Axle Spacer/Nut Kit — rear fitment, OEM compatible, chrome

Includes spacers, nuts and machined washers; made in the USA.

€36.39 €45.75

-€39.85

KIBBLEWHITE Racing Valve Spring Kit — 0.600" lift, 347 lb open, 148 lb seat

Progressively wound racing valve springs offering improved fatigue life and consistent high-rpm performance.

€144.74 €184.59

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), Inside Diameter 0.3098", Length 2.100"

-€8.80

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"),...

Precision-machined nickel bronze valve guide offering superior wear resistance and heat conductivity. Compatible with no-lead fuel; accepts special seals (sold separately). Made in the USA.

€24.97 €33.77

Shouldered C630 Bronze Valve Guide — Inside diameter 0.3098", Length 2.100"

-€8.35

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Inside diameter 0.3098",...

Precision-machined nickel bronze construction for excellent wear resistance and heat conductivity.

Compatible with no-lead fuel; accepts various valve-stem materials.

Accepts special valve guide seals (sold separately). Made in USA.

€23.64 €31.99

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), 0.3098" ID, 2.100" L

-€7.05

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"),...

Precision-machined shouldered valve guide for superior wear resistance and efficient heat dissipation.

€19.98 €27.03

Powdered Metal Valve Seats — 1.535" inside diameter, 1.969" outside diameter, 0.453" seat height

-€3.62
Out of Stock

KIBBLEWHITE Powdered Metal Valve Seats — 1.535" inside diameter, 1.969"...

High-density powdered metal valve seats with exceptional wear resistance and thermal properties; track- and street-tested and made in the USA.

€10.23 €13.85

Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007", Height 0.450"

-€4.11

KIBBLEWHITE Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007",...

High-density powdered metal valve seats engineered for wear resistance and thermal stability. Track- and street-tested for multi-valve, high-RPM applications. Standard set uses two intake and two exhaust seats.

€11.61 €15.72

Headlight Mount Kit — Cadmium plated, hex nut

-€2.88

COLONY Headlight Mount Kit — Cadmium plated, hex nut

Complete kit with beveled washer, nut, and lock washer. Made in the U.S.A.

€8.10 €10.98

Electrical Terminal Plate Kit — Terminal, Silver

-€3.70

COLONY Electrical Terminal Plate Kit — Terminal, Silver

Includes terminal plate, expansion nuts, self-tapping screws, and mounting hardware. Quality painted and pre-assembled terminal plate. Made in the U.S.A.

€14.42 €18.12

Generator Post Kit — Generator Mount, Silver

-€3.85

COLONY Generator Post Kit — Generator Mount, Silver

Includes two screws, two insulating bushings, two fiber washers, two lock washers, and two nuts. Made in the U.S.A.

€14.98 €18.83

Nitrided Valve — Head diameter 1.715", Length 4.480", Stem diameter 0.3100", Standard

-€9.31

KIBBLEWHITE Nitrided Valve — Head diameter 1.715", Length 4.480", Stem...

One-piece stellite-tipped stainless-steel valve with nitrided finish for reduced friction, superior wear resistance, and improved flow. Made in the USA.

€26.28 €35.59

Voltage Regulator Mounting Kit — Charge and Voltage Regulator, Silver

-€2.18

COLONY Voltage Regulator Mounting Kit — Charge and Voltage Regulator,...

Three rubber insulators with nuts and lock washers; made in the U.S.A.

€6.17 €8.35

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company