Engine (33)

-€34.23

JIMS Pinion Gear Shaft — JIMS 24006-73

Precision pinion gear shaft engineered for smooth gearbox operation. Made in the U.S.A.

€133.14 €167.37

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€2.25

EASTERN MOTORCYCLE PARTS Oil Pump Repair Kit — EASTERN MOTORCYCLE PARTS 17-0126

Replacement components to rebuild and rebush most oil pumps. Made in the U.S.A.

€8.75 €11.00

-€4.00

EASTERN MOTORCYCLE PARTS Oil Pump Gasket/Bushing Kit — 17-0129

Complete gasket and bushing set for oil pump service. Made in the U.S.A.

€11.28 €15.28

-€11.01

EASTERN MOTORCYCLE PARTS Oil Pump Shaft/Bushing Kit — 17-0157

Replacement set for worn rotating and sleeve components; precise fit and durable construction. Made in the U.S.A.

€31.14 €42.15

Oil Pump Relief Valve Springs — Oil pump check valve, 10 pack, A-26262-80

-€2.51

EASTERN MOTORCYCLE PARTS Oil Pump Relief Valve Springs — Oil pump check valve, 10 pack,...

Replacement spring for oil pump relief valve for Big Twin oil pumps. Restores correct pressure and valve operation.

€7.09 €9.60

-€33.16

S&S CYCLE Steel Breather Gear Kit — S&S CYCLE, 33-4250

Includes gear and spacer. Requires corresponding cam and pinion gear. Made in the U.S.A.

€129.18 €162.34

-€36.73

S&S CYCLE Steel Breather Gear Kit — 33-4253

Includes gear and spacer; requires matching cam and pinion gear. Made in the U.S.A.

€143.15 €179.88

Oil Pump Components for Evo Big Twin — S&S CYCLE, P/N 33-4230

-€10.29

S&S CYCLE Oil Pump Components for Evo Big Twin — S&S CYCLE, P/N 33-4230

Hardware, check balls, retainers and other components for Evo Big Twin oil pumps.

€40.02 €50.31

-€13.37

S&S CYCLE Oil Pump Drive Gear — S&S CYCLE, PN 33-4232

Precision drive gear for the oil pump. Must be installed as a set or with OEM equivalents. Made in the U.S.A.

€52.10 €65.47

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€47.62

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€185.22 €232.84

-€36.91

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€143.55 €180.46

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€353.11

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.5" bore, Natural

Fully machined alternator-style engine case for EFI fitment. Accepts front-mounted oil filter and includes complete hardware, bearing assemblies, and installation instructions. Made in the USA.

€1,373.20 €1,726.31

Super Stock® Alternator Style Engine Case — 3.500" standard bore, Raw

-€346.49

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.500" standard...

3.5" stock-bore engine case machined for EFI with precision line-honed races and a complete hardware kit for straightforward installation.

€1,347.45 €1,693.94

-€69.89

JIMS Hydrosolid Tappets — 0.8425" diameter

Perform like hydraulics up to 5,500 rpm, then convert to solid tappets for roughly 3–6 more usable horsepower; prevents hydraulic pump-up at high rpm; requires adjustable pushrods; made in the U.S.A.

€103.35 €173.24

-€48.84

JIMS Hydrosolid Tappets — 0.9035" diameter

Performs like a self-adjusting fluid lifter to 5,500 rpm, then becomes a solid lifter for about 3–6 additional hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€46.58

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€81.51 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

-€47.44

S&S CYCLE Steel Breather Gear Kit — Oversized (+0.03")

Complete breather gear kit includes gear and spacer; requires matching cam and pinion gear. Made in the U.S.A.

€184.83 €232.27

-€518.43

S&S CYCLE Heavy-Duty Connecting Rod Sets — S&S CYCLE, 34-7800, Steel

Complete heavy-duty connecting rod set with front and rear rods, crankpin, nuts, steel cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; accommodates strokes up to 5.00".

€651.97 €1,170.40

Connecting Rod Assembly — Vendor Part Number 2427586A-BX-LB1

-€77.08

DRAG SPECIALTIES Connecting Rod Assembly — Vendor Part Number 2427586A-BX-LB1

Complete, ready-to-install connecting rod kit engineered for reliable replacement of stock components.

€217.84 €294.92

4th Gear Countershaft Outside Retaining Washers — 5 pack

-€10.35

EASTERN MOTORCYCLE PARTS 4th Gear Countershaft Outside Retaining Washers — 5 pack

Outside retaining washer for 4th gear countershaft; precision-stamped steel for reliable fit.

€11.07 €21.42

Motor Sprocket Shaft Spacer — EASTERN MOTORCYCLE PARTS, A-24002-70

-€6.06

EASTERN MOTORCYCLE PARTS Motor Sprocket Shaft Spacer — EASTERN MOTORCYCLE PARTS,...

Precision-machined shaft spacer that ensures correct motor sprocket spacing and reliable chain alignment. Made in the U.S.A.

€17.11 €23.17

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company