Engine (33)

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€47.62

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€185.22 €232.84

-€36.91

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€143.55 €180.46

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€353.11

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.5" bore, Natural

Fully machined alternator-style engine case for EFI fitment. Accepts front-mounted oil filter and includes complete hardware, bearing assemblies, and installation instructions. Made in the USA.

€1,373.20 €1,726.31

Super Stock® Alternator Style Engine Case — 3.500" standard bore, Raw

-€346.49

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.500" standard...

3.5" stock-bore engine case machined for EFI with precision line-honed races and a complete hardware kit for straightforward installation.

€1,347.45 €1,693.94

-€69.89

JIMS Hydrosolid Tappets — 0.8425" diameter

Perform like hydraulics up to 5,500 rpm, then convert to solid tappets for roughly 3–6 more usable horsepower; prevents hydraulic pump-up at high rpm; requires adjustable pushrods; made in the U.S.A.

€103.35 €173.24

-€48.84

JIMS Hydrosolid Tappets — 0.9035" diameter

Performs like a self-adjusting fluid lifter to 5,500 rpm, then becomes a solid lifter for about 3–6 additional hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€46.58

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€81.51 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

-€47.44

S&S CYCLE Steel Breather Gear Kit — Oversized (+0.03")

Complete breather gear kit includes gear and spacer; requires matching cam and pinion gear. Made in the U.S.A.

€184.83 €232.27

-€518.43

S&S CYCLE Heavy-Duty Connecting Rod Sets — S&S CYCLE, 34-7800, Steel

Complete heavy-duty connecting rod set with front and rear rods, crankpin, nuts, steel cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; accommodates strokes up to 5.00".

€651.97 €1,170.40

Connecting Rod Assembly — Vendor Part Number 2427586A-BX-LB1

-€77.08

DRAG SPECIALTIES Connecting Rod Assembly — Vendor Part Number 2427586A-BX-LB1

Complete, ready-to-install connecting rod kit engineered for reliable replacement of stock components.

€217.84 €294.92

4th Gear Countershaft Outside Retaining Washers — 5 pack

-€10.35

EASTERN MOTORCYCLE PARTS 4th Gear Countershaft Outside Retaining Washers — 5 pack

Outside retaining washer for 4th gear countershaft; precision-stamped steel for reliable fit.

€11.07 €21.42

Motor Sprocket Shaft Spacer — EASTERN MOTORCYCLE PARTS, A-24002-70

-€6.06

EASTERN MOTORCYCLE PARTS Motor Sprocket Shaft Spacer — EASTERN MOTORCYCLE PARTS,...

Precision-machined shaft spacer that ensures correct motor sprocket spacing and reliable chain alignment. Made in the U.S.A.

€17.11 €23.17

-€31.17

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

-€9.44

JIMS Oil Pump Component — 26346-69/70

Replacement oil pump component for Big Twin models.

€36.69 €46.13

Oil Pump Component — Idler gear, 26317-68A

-€12.82

JIMS Oil Pump Component — Idler gear, 26317-68A

Replacement component for Big Twin models; precision-machined to restore lubrication performance and reduce noise.

€49.89 €62.71

-€14.02

JIMS Oil Pump Component — JIMS idler gear

Replacement component for Big Twin lubrication systems. Precision‑machined for durability and proper fit.

€54.52 €68.54

Nitrided Valve — Intake, Head 1.585", Length 4.550", Stem 0.3100", Tulip 23°

-€13.39

KIBBLEWHITE Nitrided Valve — Intake, Head 1.585", Length 4.550", Stem...

One-piece stellite-tipped nitrided valve with .002" depth and .0002" surface buildup to reduce wear and friction. Resistant to corrosion and compatible with leaded and unleaded fuels. Made in the USA.

€25.64 €39.03

Nitrided Valve — Head 1.350 in, Stem 0.3095 in, Length 4.640 in, Stainless steel

-€9.73

KIBBLEWHITE Nitrided Valve — Head 1.350 in, Stem 0.3095 in, Length 4.640...

One-piece, stellite-tipped nitrided valve with .002" depth and .0002" surface buildup for reduced friction and superior wear. Corrosion resistant, compatible with leaded and unleaded fuels. Made in the USA.

€33.05 €42.78

-€7.44

JIMS Gear-Side Pinion Shaft Nut — 5/8-24

High-strength pinion shaft nut designed for secure gear-side installation and long service life.

€28.92 €36.36

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

Nitrided Valve — Head 1.825 in, Length 3.562 in, Stem 0.3090 in, Intake

-€11.10

KIBBLEWHITE Nitrided Valve — Head 1.825 in, Length 3.562 in, Stem 0.3090...

One-piece nitrided stainless-steel intake valve with stellite tip—improved wear resistance, reduced friction, and a lightweight flow profile. Made in USA.

€31.35 €42.45

Nitrided Valve — Head diameter 1.750" , Length 3.810" , Stem diameter 0.3760" , Stainless steel

-€6.07

KIBBLEWHITE Nitrided Valve — Head diameter 1.750" , Length 3.810" , Stem...

One-piece stellite-tipped nitrided valve with enhanced wear resistance, reduced friction, and excellent flow characteristics. Made in the USA.

€23.56 €29.63

-€6.16

KIBBLEWHITE Nitrided Valve — Head 1.950" , Stem 0.3765" , Length 3.885"

One-piece stellite-tipped nitrided valve for improved wear resistance, reduced friction, and excellent flow characteristics. Made in USA.

€23.92 €30.08

Nitrided Valve — 1.840" head, 4.445" length, 0.3100" stem, 23° tulip

-€7.63

KIBBLEWHITE Nitrided Valve — 1.840" head, 4.445" length, 0.3100" stem, 23°...

High-wear-resistant nitrided valve with stellite tip for reduced friction, superior corrosion resistance, and improved flow. Made in the USA.

€21.60 €29.23

Nitrided Valve — 1.615 in head, 4.525 in length, 0.3096 in stem, 29° tulip

-€8.29

KIBBLEWHITE Nitrided Valve — 1.615 in head, 4.525 in length, 0.3096 in...

One-piece stellite-tipped stainless-steel valve with a nitrided surface to reduce wear and friction. Lightweight profiles for improved flow. Compatible with leaded and unleaded fuels. Made in the USA.

€23.43 €31.72

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company